*2013/12/16 15:19:04.14 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/08 15:21:38.000 END TIME : UTC 1999/07/08 15:22:46.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 49 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 49 2 Temperature 'deg C (ITS90)' 7.6661 12.1372 3 Salinity PSS-78 24.3331 31.9895 4 Number_of_bin_records n/a 2 18 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220007.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : KY-1 MOOR EVENT NUMBER : 7 LATITUDE : 59 55.20000 N ! (deg min) LONGITUDE : 144 1.00000 W ! (deg min) WATER DEPTH : 57 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:27:48 572 572 REMOVECH 6.0 2002/02/18 19:32:17 572 572 CLIP 1.3 2006/01/13 08:42:38 353 278 REMOVECH 7.0 2006/01/16 11:55:38 278 278 FILTERS 4.3 2006/01/17 10:47:41 278 278 CALIB 11.7 2006/01/17 16:05:00 278 278 EXPFILT 1.1 2006/01/19 09:35:00 278 278 FILTERS 4.3 2006/01/19 09:39:34 278 278 DERIVEDQ 3.5 2006/01/19 11:53:55 278 278 SHIFTDAT 3.4 2006/01/19 12:22:00 278 278 CELLTM 1.3 2006/01/19 12:23:52 278 278 DELETE 6.3 2006/01/19 12:34:14 278 138 CALIB 11.7 2006/01/19 12:41:06 138 138 REMOVECH 7.0 2006/01/23 15:01:42 138 138 DERIVEDQ 3.5 2006/01/23 15:07:05 138 138 CLIP 1.3 2006/01/26 11:27:20 138 138 BINAVE 4.1 2006/01/26 13:47:46 138 50 CLIP 1.3 2006/01/30 09:37:35 50 49 REMOVECH 7.0 2006/01/30 09:54:26 49 49 HDREDIT2 2.5.1 2006/03/16 16:16:06 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:04 49 49 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -1.4 -10.5 *exp( -.0065 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 75, 352 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:38 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:00 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 43.88 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:06 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:42 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:26 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:06 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\ky-100.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 08 1999 08:37:31 Ship: LAURIER Cruise: 9922 Station: KY-1-mooring Latitude: 59 55.2 N Longitude: 144 01.0 W remarks: after recovery of mooring CS-1 ds SEACAT PROFILER V3.1b SN 1030 07/08/99 15:38:59.208 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.219 iop = 135 vmain = 11.6 vlith = 5.7 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 572 free = 86175 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/08 15:21:01 samples 0 to 571 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 572 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 572 # span 1 = -12.229, 46.254 # span 2 = 7.6499, 14.9907 # span 3 = 0.076957, 35.690449 # span 4 = -1.080, 1.260 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 08 1999 15:21:01 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:41:51, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220007.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 10.5914 24.3331 18 2.0 10.7932 26.2476 3 3.0 10.9080 26.7033 3 4.0 11.3056 27.8492 3 5.0 11.9644 30.0648 3 6.0 12.1372 30.5873 2 7.0 12.1366 30.6821 2 8.0 12.1094 30.7048 2 9.0 12.0991 30.7126 3 10.0 12.0967 30.7191 2 11.0 12.0802 30.7220 2 12.0 12.0588 30.7238 2 13.0 12.0410 30.7280 2 14.0 12.0259 30.7335 2 15.0 12.0049 30.7374 2 16.0 11.9848 30.7449 2 17.0 11.9668 30.7533 2 18.0 11.9379 30.7651 3 19.0 11.9125 30.7919 2 20.0 11.8678 30.8102 2 21.0 11.7803 30.8517 2 22.0 11.5252 30.9451 2 23.0 11.2737 31.0754 2 24.0 11.0825 31.1956 2 25.0 10.7980 31.2684 2 26.0 10.6115 31.3875 2 27.0 10.4485 31.4346 2 28.0 10.1698 31.4331 2 29.0 9.8910 31.5308 2 30.0 9.6330 31.6499 3 31.0 9.4955 31.6696 2 32.0 9.4305 31.6696 2 33.0 9.3291 31.6617 2 34.0 9.1734 31.6459 2 35.0 8.9183 31.6380 3 36.0 8.6752 31.6825 2 37.0 8.5442 31.7200 2 38.0 8.4573 31.7408 2 39.0 8.3806 31.7409 2 40.0 8.2149 31.7408 2 41.0 7.9442 31.7620 3 42.0 7.8568 31.8673 2 43.0 7.8611 31.8989 2 44.0 7.8537 31.9006 3 45.0 7.8132 31.9155 2 46.0 7.7674 31.9303 3 47.0 7.7310 31.9412 3 48.0 7.6913 31.9764 5 49.0 7.6661 31.9895 6