*2013/12/16 15:16:24.75 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS .HS9819 T07 Alt S start position 50 50.48 N 129 8.41 W GPS data 8 sec. old 02:37:22 10-19 Alt S stop position 50 50.54 N 129 8.45 W 02:39:46 10-19-1998 CTDEDIT was used to clean salinity at the surface (1 point). *FILE START TIME : UTC 1998/10/19 02:37:19.720 END TIME : UTC 1998/10/19 02:39:46.420 NUMBER OF RECORDS : 29 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.1 29.1 2 Temperature 'deg C (IPTS68)' 11.719 11.9974 3 Salinity PSS-78 32.1204 32.1799 4 Number_of_bin_records n/a 16 47 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F REAL*4 4 4 -99 ' ' 5 I I 0 $END $REMARKS File name : 98190112.ACQ $END *ADMINISTRATION MISSION : 1998-19 AGENCY : 'PBS, Ocean Science and Productivity Division,' CONTINUED : ' Nanaimo, B.C.' COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Dixon Entrance, Southeast Alaska STATION : NONE EVENT NUMBER : 112 LATITUDE : 50 50.48000 N ! (deg min) LONGITUDE : 129 8.41000 W ! (deg min) LATITUDE 2 : 50 50.54000 N ! (deg min) LONGITUDE 2 : 129 8.45000 W ! (deg min) WATER DEPTH : 85 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 87107 SERIAL NUMBER : 43825 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1998/10/19 02:37:19.720 END TIME : UTC 1998/10/19 02:39:46.420 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 3193 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (0 1000) Temperature 'DEG C (ITS68)' 10 -99 (0.123857E-01 0.998904) Conductivity_Ratio n/a 63 -99 (-0.452327E-03 1.00047) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1999/02/04 13:40:34 3193 3193 CALIB 7.5 1999/02/04 16:25:20 3193 3193 DESPIKE 1.4 1999/02/04 17:13:12 3193 3193 TIMECOMP 2.2 1999/02/04 17:26:13 3193 3193 DELETE 4.4 1999/02/04 17:38:28 3193 774 BOXCAR 3.0 1999/02/05 10:48:37 774 774 BINAVE 3.0 1999/02/05 10:56:23 774 29 CTDEDIT 4.14 1999/02/05 16:45:43 29 29 REMOVECH 3.1 1999/02/08 14:22:43 29 29 HDREDIT2 1.8 2004/01/12 21:21:51 ? ? CLEAN 4.5 2004/01/12 21:21:59 29 29 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:16:24 29 29 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = 0.0 Calibration file = W:\CTD\9819\9819post.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 -2.00 2000.00 .10000 999.000 3.00 Temp 55 5 .00 15.00 .00500 999.000 3.00 Cond 55 5 .00 1.50 .00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): .0700 Sample period (sec): .0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 10.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< .33m/s (calculated over 11 points) will be deleted Sample interval = .04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity_Ratio CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.1 11.9955 32.1213 28 2.0 11.9957 32.1219 28 2.9 11.9969 32.1213 32 3.9 11.9968 32.1215 32 5.2 11.9953 32.1204 18 6.0 11.9954 32.1208 34 7.0 11.9974 32.1217 45 7.9 11.9959 32.1258 30 9.0 11.9921 32.1296 23 10.1 11.9870 32.1298 46 11.0 11.9818 32.1304 21 12.0 11.9715 32.1326 16 13.0 11.9282 32.1292 17 14.0 11.8424 32.1398 21 15.1 11.8106 32.1474 35 15.9 11.7822 32.1501 47 17.0 11.7543 32.1545 23 18.0 11.7374 32.1596 19 19.0 11.7324 32.1583 18 20.0 11.7221 32.1579 17 21.0 11.7194 32.1587 20 22.0 11.7190 32.1606 36 23.0 11.7232 32.1628 21 24.0 11.7248 32.1644 21 25.0 11.7257 32.1644 21 26.1 11.7284 32.1671 38 27.0 11.7278 32.1684 20 28.0 11.7288 32.1745 17 29.1 11.7336 32.1799 30