*2013/12/16 15:16:06.17 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1998/06/13 16:04:05.000 TIME INCREMENT : 0 0 0 0 0 ! (day hr min sec ms) NUMBER OF RECORDS : 33 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------- --------------- -------------- -------------- 1 Pressure decibar 1 33 2 Temperature:Primary 'deg C (ITS90)' 6.9172 9.0502 3 Transmissivity %/metre 0 56.7 4 Salinity PSS-78 32.6654 32.6858 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS This file converted from Sea-Bird file: h:\linep_98\sb_avg\98150044.avg $END *ADMINISTRATION MISSION : 1998-15 AGENCY : IOS, Ocean Science and Productivity, Sidney, BC COUNTRY : Canada PROJECT : Line P SCIENTIST : Perkin R. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : P26 EVENT NUMBER : 44 LATITUDE : 49 59.79000 N ! (deg min) LONGITUDE : 144 59.69000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE 911 Plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 63507 temperature ' ' secondary conductivity ' ' secondary transmissometer ' ' 182D irradiance ' ' 4495 $END $REMARKS SOFTWARE VERSION 4.229 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.1 1998/06/25 08:09:33 64 64 CALIB 7.3 1998/06/25 13:27:41 64 64 DERIVEDQ 2.2 1998/06/25 14:34:11 64 64 DELETE 4.4 1998/07/06 08:20:37 64 33 REMOVECH 3.1 1998/09/03 14:25:35 33 33 REMOVECH 6.0 2003/04/28 16:42:06 33 33 HDREDIT2 1.6 2003/04/28 16:44:22 ? ? CLEAN 4.2 2003/04/28 16:46:29 33 33 REMOVECH 6.0 2004/10/07 14:19:21 33 33 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:16:06 33 33 $END $REMARKS -The following CALIB parameters were used: Calibration type = C Salinity is computed Pressure offset = .0 Calibration file = h:\linep_98\9815corr.ccf -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature:Primary Reference channel for conductivity ratio is: Conductivity:Primary Reference channel for salinity is: Salinity Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Theta .0 Insitu YES Depth Insitu n/a YES Geopotential_anomaly Insitu Insitu YES Gamma-theta .0 Pot Temp YES -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 10.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following CHANNEL(S) were removed from file. Conductivity:secondary Temperature:secondary theta depth Conductivity:primary Geopotential_anomaly Gamma-theta -The following CHANNEL(S) were removed from file. Flag CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. -The following CHANNEL(S) were removed from file. PAR $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = D:\DATA\9815\98150044.DAT Software Version 4.229 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 27 Number of Voltage Words = 3 System UpLoad Time = Jun 13 1998 16:04:05 NMEA Latitude = 49 59.79 N NMEA Longitude = 144 59.69 W NMEA UTC (Time) = Jun 13 1998 16:04:05 Store Lat/Lon Data = Add to Header Only Command Line = seasave Station: P26 Watch Keeper: enz.cast #44 # nquan = 8 # nvalues = 64 # units = metric # name 0 = pr: pressure [db] # name 1 = t090: temperature, pri, ITS-90 [deg C] # name 2 = c0S/m: conductivity, primary [S/m] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c1S/m: conductivity, secondary [S/m] # name 5 = par: irradiance (PAR) # name 6 = xmiss: transmissometer # name 7 = flag: 0.000e+00 # span 0 = 1.000, 33.000 # span 1 = 6.9172, 9.0502 # span 2 = 3.311753, 3.496546 # span 3 = 6.9162, 9.0547 # span 4 = 3.311964, 3.496788 # span 5 = 1.850e+00, 1.850e+00 # span 6 = 3.39, 86.76 # span 7 = 0.000e+00, 0.000e+00 # interval = decibars: 1 # start_time = Jun 13 1998 16:04:05 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 01-May-98s # sensor 1 = Frequency 1 conductivity, primary, 1729, 01-May-98, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 01-11-1996 # sensor 3 = Frequency 3 temperature, secondary, 2038, 01-May-98s # sensor 4 = Frequency 4 conductivity, secondary, 1762, 08-May-98s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 2 transmissometer, 182D, 96/11/13 # sensor 6 = Extrnl Volt 4 irradiance (PAR), 4495, Feb12/97 # datcnv_date = Jun 24 1998 23:42:28, 4.229 # datcnv_in = 98150044.DAT 98150043.CON # datcnv_skipover = 0 # wildedit_date = Jun 24 1998 23:42:41, 4.229 # wildedit_in = 98150044.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 c0S/m t190 c1S/m par xmiss # wildedit_excl_bad_scans = yes # celltm_date = Jun 24 1998 23:42:47, 4.229 # celltm_in = 98150044.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # filter_date = Jun 24 1998 23:42:54, 4.229 # filter_in = 98150044.CNV # filter_low_pass_tc_A = 0.150 # filter_low_pass_tc_B = 0.100 # filter_low_pass_A_vars = pr # filter_low_pass_B_vars = # loopedit_date = Jun 24 1998 23:43:06, 4.229 # loopedit_in = 98150044.CNV # loopedit_minVelocity = 0.250 # loopedit_excl_bad_scans = yes # binavg_date = Jun 24 1998 23:43:14, 4.229 # binavg_in = 98150044.CNV # binavg_bintype = Pressure Bins # binavg_binsize = 1.00 # binavg_excl_bad_scans = yes # binavg_downcast_only = no # binavg_skipover = 0 # binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000 # file_type = ascii END* Collection method: Salinity-Temperature-pressure data were obtained with a Sea-bird 911plus CTD. Additional sensors such as transissometers, fluorometers and underwater light sensors might have been added to the CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *CALIBRATION $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature:Primary Conductivity:Primary) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------------------ ------- ---- ------ ------------ Conductivity:Primary ratio 66 10 () (0 0.233024 0.3E-07 0) Conductivity:Secondary ratio 66 10 () (0 0.233024 0.15E-07 0) $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure: missi ! Primary vity !------ -------- ----- -------- *END OF HEADER 1.0 9.0502 0.0 32.6704 2.0 9.0405 49.3 32.6723 3.0 9.0403 52.5 32.6720 4.0 9.0458 52.4 32.6724 5.0 9.0463 52.3 32.6715 6.0 9.0496 48.0 32.6656 7.0 9.0412 50.4 32.6725 8.0 9.0418 52.5 32.6720 9.0 9.0409 52.1 32.6721 10.0 9.0393 52.4 32.6719 11.0 9.0406 52.5 32.6718 12.0 9.0400 52.6 32.6720 13.0 9.0406 52.7 32.6720 14.0 9.0401 52.6 32.6720 15.0 9.0385 52.6 32.6721 16.0 9.0368 52.5 32.6720 17.0 9.0389 52.5 32.6720 18.0 9.0338 52.5 32.6720 19.0 9.0139 52.5 32.6713 20.0 8.9290 52.1 32.6707 21.0 8.7708 51.0 32.6690 22.0 8.3213 47.2 32.6654 23.0 7.8627 44.3 32.6741 24.0 7.6186 44.0 32.6712 25.0 7.5002 44.6 32.6739 26.0 7.1860 44.4 32.6710 27.0 7.0603 46.2 32.6738 28.0 7.0367 47.2 32.6736 29.0 7.0067 48.2 32.6732 30.0 6.9649 50.1 32.6744 31.0 6.9474 52.0 32.6761 32.0 6.9290 55.1 32.6809 33.0 6.9172 56.7 32.6858