*2019/01/17 16:56:06.92 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 1998/06/24 05:43:00.000 NUMBER OF RECORDS : 23 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------- -------------- -------------- 1 Pressure decibar 9.7 391.81 2 Temperature 'deg C' -1.538 1.2655 3 Bottle_Number n/a 1 23 4 Salinity PSS-78 32.7392 33.9368 5 Number_of_bin_records n/a 56 100 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 ' ' ' ' 11 F ' ' 2 2 ' ' ' ' 9 F ' ' 4 3 ' ' ' ' 4 F ' ' 0 4 ' ' ' ' 9 F REAL*4 4 5 ' ' ' ' 5 F ' ' 0 $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 1998-12 AGENCY : GIROQ/IOS COUNTRY : Canada PROJECT : Northwater Polynya SCIENTIST : Gosselin M. PLATFORM : CCGS Pierre Radisson *LOCATION STATION : 0368 EVENT NUMBER : 368 LATITUDE : 76 22.65300 N ! (deg min) LONGITUDE : 77 25.68500 W ! (deg min) WATER DEPTH : 400 *INSTRUMENT TYPE : FSI CTD MODEL : ICTD SERIAL NUMBER : 1329 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---------------- -------------- ---------- Pressure n/a 1329 Temperature n/a 1329 Conductivity n/a 1329 Thermistor1 n/a 1329 'Touch Down' n/a 0 Transmissivity n/a 598 Chlorophyl n/a 93S $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------ ------ ---------- -------- --------- --------- FSICNVT 1.3 1998/11/24 09:19:13 7382 7382 CALIB 10.2 2002/04/04 16:01:31 1694 1694 CALIB 10.2 2002/04/08 09:24:22 1694 1694 BINAVE 4.0.1 2002/04/08 09:27:02 1694 23 HDREDIT2 1.3 2002/04/09 14:04:22 ? ? REMOVECH 8.2 2013/12/24 11:41:19 23 23 SORT 3.6 2013/12/24 11:42:47 23 23 HDREDIT2 2.6 2013/12/24 13:00:33 ? ? CLEAN 5.1 2013/12/24 13:10:11 23 23 HDREDIT2 2.6 2013/12/24 14:29:11 ? ? CHANGE_MISSION_IDs 1.0 2014/03/03 10:29:26 23 23 CHANGE_FLAGS 2.0 2014/11/20 09:52:20 23 23 HDREDIT2 3.1.1 2019/01/17 16:56:06 ? ? $END $REMARKS -The following FSICNVT parameters were used: Project Name: Northwater Polynya Config File: W:\ctd\9812\1329.txt FSI Configuration File Summary: Number of Channels: 7 Bytes/Record: 19 Records/Second : 25 CTD Serial #: 1329 Channel Raw Units Cal Units Serial # Format Scale Pos -------------------- ---------- ---------- ---------- -------- ---------- --- Pressure Dbars Dbars 1329 F10.1 .1000 2 Temperature Deg C Deg C 1329 F12.4 .0005 4 Conductivity mmho/cm Ratio 1329 F12.6 .0010 6 Thermistor1 Deg C Deg C 1329 F12.4 .0005 9 Touch Down raw raw 0 F8.0 1.0000 11 Transmissivity raw % 598 F10.2 1.0000 13 Chlorophyl raw mg/m^3 93S F10.2 1.0000 15 -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = M:\Data\9812\9812RCAL.txt Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure Dbars 10 -0.6000000E+00 0.1000000E+01 2 Temperature Deg C 10 0.2452940E-01 0.9962400E+00 0.1587200E-03 -0.1968500E-05 3 Conductivity Ratio 68 0.0000000E+00 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Salinity PSS-78 130 Pressure Temperature Conductivity -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Salinity is computed Calibration file = M:\Data\9812\9812_cond_cal.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity Ratio 10 0.0000000E+00 0.9990838E+00 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Salinity PSS-78 130 Pressure Temperature Conductivity -The following BINAVE parameters were used: Bin channel = Bottle Number Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2013/12/24 11:41:19 The following CHANNEL(S) were removed: Conductivity [Ratio] Thermistor1 [Deg C] Touch Down [raw] Transmissivity [%] Chlorophyl [mg/m^3] -SORT parameters: 2013/12/24 11:42:47 Sorted in ascending order of channel Pressure -HEADER EDITS: 2013/12/24 13:00:33 Channel 1: Pressure [decibar] Units: Dbars ==> decibar Channel 2: Temperature [deg C] Units: Deg C ==> deg C Channel 3: Bottle_Number [n/a] Name: Bottle Number ==> Bottle_Number -CLEAN functions: 2013/12/24 13:09:59 20 Reset #RECS, MIN & MAX values in header. Delete Empty Channels: 0 deleted. -HEADER EDITS: 2013/12/24 14:29:11 Applied edit header: P:\Cruise_Data_Processing\Lisa Miller's Carbon Data\DIC_ALK.txt -HEADER EDITS: 2019/01/17 16:56:06 Applied edit header: P:\Cruise_Data_Processing\2018-040\Processing\ios\1998-12-hdr.txt $END *RAW START TIME : UTC 1998/06/24 05:43:00.000 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 7382 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !---------------- --------- --------- ----------- Pressure Dbars Temperature 'Deg C' Conductivity mmho/cm Thermistor1 'Deg C' 'Touch Down' raw Transmissivity raw Chlorophyl raw $END *CALIBRATION START TIME : UTC 1998/06/24 05:43:00.000 $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Pressure Dbars 10 ' ' (-0.6 1) Temperature 'Deg C' 10 ' ' (0.245294E-01 0.99624 0.15872E-03 -0.19685E-05) Conductivity Ratio 68 ' ' (0 1) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 ' ' (Pressure Temperature Conductivity) () Salinity PSS-78 130 ' ' (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity Ratio 10 ' ' () (0 0.9990838) $END *COMMENTS Dissolved inorganic carbon (DIC) was determined using coulometric analysis. Total alkalinity (Alk) was determined by potentiometric titration. Complete documentation on DIC and ALK sampling, analysis and precision estimates can be found in the Carbon Excel file from the cruise located in the cruise "DOC" directory. . !----1----- ---2---- -3- ---4---- -5-- ! Pressure Temperat Bot Salinity Numb ! ure tle er_o ! _ ~bin ! Num _rec ! ber ords !---------- -------- --- -------- ---- *END OF HEADER 9.70 1.2655 23. 32.7392 100. 20.23 -0.3883 22. 32.7803 61. 20.25 -0.3845 21. 32.8276 60. 20.28 -0.3054 18. 32.8127 60. 20.33 -0.2870 17. 32.8074 61. 20.37 -0.3522 20. 32.8132 57. 20.38 -0.3422 19. 32.8081 56. 20.43 -0.2108 16. 32.7538 100. 49.62 -1.5380 15. 33.0132 100. 99.60 -1.4589 5. 33.3897 100. 99.61 -1.4583 6. 33.3896 62. 99.62 -1.4580 8. 33.3894 60. 99.63 -1.4599 14. 33.3896 60. 99.64 -1.4582 7. 33.3894 61. 99.65 -1.4575 11. 33.3885 60. 99.66 -1.4571 10. 33.3877 57. 99.67 -1.4586 9. 33.3891 61. 99.67 -1.4597 12. 33.3896 56. 99.68 -1.4596 13. 33.3892 62. 199.55 -1.0857 4. 33.7016 100. 299.70 -0.5007 3. 33.8861 100. 350.26 -0.4412 2. 33.9367 100. 391.81 -0.4949 1. 33.9368 100.