*2019/01/17 16:56:05.83 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 1998/06/14 22:45:00.000 NUMBER OF RECORDS : 19 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------- -------------- -------------- 1 Pressure decibar 1.37 193.81 2 Temperature 'deg C' -1.6967 0.7894 3 Bottle_Number n/a 1 19 4 Salinity PSS-78 32.5494 33.3798 5 Number_of_bin_records n/a 65 100 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 ' ' ' ' 11 F ' ' 2 2 ' ' ' ' 9 F ' ' 4 3 ' ' ' ' 4 F ' ' 0 4 ' ' ' ' 9 F REAL*4 4 5 ' ' ' ' 5 F ' ' 0 $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 1998-12 AGENCY : GIROQ/IOS COUNTRY : Canada PROJECT : Northwater Polynya SCIENTIST : Gosselin M. PLATFORM : CCGS Pierre Radisson *LOCATION STATION : 325 EVENT NUMBER : 325 LATITUDE : 76 59.04300 N ! (deg min) LONGITUDE : 76 13.48800 W ! (deg min) WATER DEPTH : 200 *INSTRUMENT TYPE : FSI CTD MODEL : ICTD SERIAL NUMBER : 1329 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---------------- -------------- ---------- Pressure n/a 1329 Temperature n/a 1329 Conductivity n/a 1329 Thermistor1 n/a 1329 'Touch Down' n/a 0 Transmissivity n/a 598 Chlorophyl n/a 93S $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------ ------ ---------- -------- --------- --------- FSICNVT 1.3 1998/11/24 09:19:13 5080 5080 CALIB 10.2 2002/04/04 16:01:18 1580 1580 CALIB 10.2 2002/04/08 09:24:06 1580 1580 BINAVE 4.0.1 2002/04/08 09:26:55 1580 19 HDREDIT2 1.3 2002/04/09 14:04:20 ? ? REMOVECH 8.2 2013/12/24 11:41:18 19 19 SORT 3.6 2013/12/24 11:42:47 19 19 HDREDIT2 2.6 2013/12/24 13:00:32 ? ? CLEAN 5.1 2013/12/24 13:10:09 19 19 HDREDIT2 2.6 2013/12/24 14:29:10 ? ? CHANGE_MISSION_IDs 1.0 2014/03/03 10:29:24 19 19 CHANGE_FLAGS 2.0 2014/11/20 09:52:17 19 19 HDREDIT2 3.1.1 2019/01/17 16:56:05 ? ? $END $REMARKS -The following FSICNVT parameters were used: Project Name: Northwater Polynya Config File: W:\ctd\9812\1329.txt FSI Configuration File Summary: Number of Channels: 7 Bytes/Record: 19 Records/Second : 25 CTD Serial #: 1329 Channel Raw Units Cal Units Serial # Format Scale Pos -------------------- ---------- ---------- ---------- -------- ---------- --- Pressure Dbars Dbars 1329 F10.1 .1000 2 Temperature Deg C Deg C 1329 F12.4 .0005 4 Conductivity mmho/cm Ratio 1329 F12.6 .0010 6 Thermistor1 Deg C Deg C 1329 F12.4 .0005 9 Touch Down raw raw 0 F8.0 1.0000 11 Transmissivity raw % 598 F10.2 1.0000 13 Chlorophyl raw mg/m^3 93S F10.2 1.0000 15 -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = M:\Data\9812\9812RCAL.txt Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure Dbars 10 -0.6000000E+00 0.1000000E+01 2 Temperature Deg C 10 0.2452940E-01 0.9962400E+00 0.1587200E-03 -0.1968500E-05 3 Conductivity Ratio 68 0.0000000E+00 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Salinity PSS-78 130 Pressure Temperature Conductivity -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Salinity is computed Calibration file = M:\Data\9812\9812_cond_cal.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity Ratio 10 0.0000000E+00 0.9990838E+00 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Salinity PSS-78 130 Pressure Temperature Conductivity -The following BINAVE parameters were used: Bin channel = Bottle Number Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2013/12/24 11:41:18 The following CHANNEL(S) were removed: Conductivity [Ratio] Thermistor1 [Deg C] Touch Down [raw] Transmissivity [%] Chlorophyl [mg/m^3] -SORT parameters: 2013/12/24 11:42:47 Sorted in ascending order of channel Pressure -HEADER EDITS: 2013/12/24 13:00:32 Channel 1: Pressure [decibar] Units: Dbars ==> decibar Channel 2: Temperature [deg C] Units: Deg C ==> deg C Channel 3: Bottle_Number [n/a] Name: Bottle Number ==> Bottle_Number -CLEAN functions: 2013/12/24 13:09:59 20 Reset #RECS, MIN & MAX values in header. Delete Empty Channels: 0 deleted. -HEADER EDITS: 2013/12/24 14:29:10 Applied edit header: P:\Cruise_Data_Processing\Lisa Miller's Carbon Data\DIC_ALK.txt -HEADER EDITS: 2019/01/17 16:56:05 Applied edit header: P:\Cruise_Data_Processing\2018-040\Processing\ios\1998-12-hdr.txt $END *RAW START TIME : UTC 1998/06/14 22:45:00.000 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 5080 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !---------------- --------- --------- ----------- Pressure Dbars Temperature 'Deg C' Conductivity mmho/cm Thermistor1 'Deg C' 'Touch Down' raw Transmissivity raw Chlorophyl raw $END *CALIBRATION START TIME : UTC 1998/06/14 22:45:00.000 $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Pressure Dbars 10 ' ' (-0.6 1) Temperature 'Deg C' 10 ' ' (0.245294E-01 0.99624 0.15872E-03 -0.19685E-05) Conductivity Ratio 68 ' ' (0 1) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 ' ' (Pressure Temperature Conductivity) () Salinity PSS-78 130 ' ' (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity Ratio 10 ' ' () (0 0.9990838) $END *COMMENTS Dissolved inorganic carbon (DIC) was determined using coulometric analysis. Total alkalinity (Alk) was determined by potentiometric titration. Complete documentation on DIC and ALK sampling, analysis and precision estimates can be found in the Carbon Excel file from the cruise located in the cruise "DOC" directory. . !----1----- ---2---- -3- ---4---- -5-- ! Pressure Temperat Bot Salinity Numb ! ure tle er_o ! _ ~bin ! Num _rec ! ber ords !---------- -------- --- -------- ---- *END OF HEADER 1.37 0.7547 18. 32.5516 69. 1.38 0.7636 19. 32.5518 74. 1.39 0.7497 16. 32.5517 100. 1.39 0.7513 17. 32.5514 69. 3.45 0.7680 15. 32.5494 100. 4.43 0.7894 14. 32.5518 67. 4.47 0.7858 13. 32.5557 100. 10.14 0.6490 12. 32.6042 82. 10.15 0.6547 11. 32.5922 100. 15.22 -0.5674 7. 32.8825 100. 15.22 0.0247 10. 32.8488 65. 15.24 -0.1527 8. 32.8614 69. 15.24 -0.0710 9. 32.8564 65. 40.50 -1.5155 6. 32.9903 82. 40.56 -1.5072 5. 32.9871 100. 101.65 -1.6965 3. 33.1236 100. 102.59 -1.6967 4. 33.1295 65. 193.59 -1.6033 1. 33.3794 100. 193.81 -1.6033 2. 33.3798 73.