*2013/12/16 15:14:34.61 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 49 43.60 N 124 50.93 W 04:35:08 03-25-1998 Alt S stop position 49 43.60 N 124 50.94 W 04:36:33 03-25-1998 *FILE START TIME : UTC 1998/03/25 04:35:05.220 END TIME : UTC 1998/03/25 04:36:33.320 NUMBER OF RECORDS : 40 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.2 38.9 2 Temperature 'deg C (IPTS68)' 8.491 8.688 3 Transmissivity %/metre 44 58.7 4 Salinity PSS-78 27.9572 28.7919 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 8 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 98070036.ACQ $END *ADMINISTRATION MISSION : 1998-07 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Hake SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : NONE EVENT NUMBER : 36 LATITUDE : 49 43.60000 N ! (deg min) LONGITUDE : 124 50.93000 W ! (deg min) LATITUDE 2 : 49 43.60000 N ! (deg min) LONGITUDE 2 : 124 50.94000 W ! (deg min) WATER DEPTH : $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : WOCE SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1998/03/25 04:35:05.220 END TIME : UTC 1998/03/25 04:36:33.320 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1568 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dbars 10 -99 (-6 3000) Temperature 'Deg c (ITS68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.412E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/09/09 14:30:00 1568 1568 CALIB 7.5 1998/09/23 14:17:05 1568 1568 DESPIKE 1.4 1998/09/23 15:47:43 1568 1568 DELETE 4.4 1998/09/23 16:09:19 1568 327 BOXCAR 2.3 1998/09/23 16:12:27 327 327 CTDEDIT 4.13 1998/09/23 16:26:55 327 327 BINAVE2 1.0 1998/09/24 11:09:03 327 40 REMOVECH 3.1 1998/09/28 09:25:47 40 40 CALIB 7.5 1998/10/27 13:49:13 40 40 HDREDIT2 1.8 2004/01/12 09:27:00 ? ? CLEAN 4.5 2004/01/12 09:27:26 40 40 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:14:34 40 40 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -6.0 Calibration file = w:\ayplee\cal\58483.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 500.00 .10000 999.000 3.00 Temp 55 5 4.00 30.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00100 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): .00 Minimum Surface Salinity: 10.000 Surface Swell Pressure Tolerance: .50 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 1.00 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity Number_of_bin -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = w:\ayplee\9807\9807cor.ccf CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. $END !--1--- ---2--- --3-- ---4---- !Pressu Tempera Trans Salinity !re ture missi ! vity !------ ------- ----- -------- *END OF HEADER 0.2 8.677 45.4 27.9572 1.0 8.673 45.4 27.9763 2.0 8.670 45.0 27.9725 3.0 8.671 45.2 27.9754 4.0 8.682 45.6 27.9924 5.0 8.688 44.9 27.9995 6.1 8.672 44.9 28.0064 7.0 8.662 44.6 28.0105 8.0 8.675 44.0 27.9954 9.1 8.633 44.9 28.0195 10.0 8.592 45.1 28.0327 11.0 8.553 45.3 28.0540 12.1 8.492 46.3 28.1500 12.9 8.491 48.9 28.2275 14.0 8.505 50.4 28.2880 14.9 8.515 50.9 28.3132 16.0 8.523 51.5 28.3302 17.0 8.541 52.1 28.3827 18.0 8.559 53.5 28.4856 19.0 8.570 54.9 28.5297 20.0 8.576 55.7 28.5502 21.0 8.585 56.3 28.5719 22.0 8.590 55.8 28.5796 23.0 8.590 55.7 28.5835 24.0 8.604 56.4 28.6065 25.0 8.615 57.2 28.6291 26.0 8.624 57.9 28.6497 27.0 8.630 57.7 28.6652 28.0 8.640 57.6 28.6929 29.0 8.643 57.6 28.7018 30.0 8.646 57.7 28.7113 31.0 8.649 57.6 28.7172 32.0 8.653 57.9 28.7261 33.0 8.657 58.3 28.7326 34.0 8.659 58.4 28.7411 35.0 8.663 58.3 28.7534 35.9 8.667 58.5 28.7657 36.9 8.673 58.7 28.7807 38.0 8.676 58.5 28.7883 38.9 8.677 57.9 28.7919