*2013/12/16 15:14:34.11 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS pressure corrected to 3000 from 1000 Alt S start position 48 53.79 N 122 57.47 W 21:48:28 03-17-1998 Alt S stop position 48 53.75 N 122 57.48 W 21:53:28 03-17-1998 *FILE START TIME : UTC 1998/03/17 21:48:28.020 END TIME : UTC 1998/03/17 21:53:28.970 NUMBER OF RECORDS : 108 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.2 107 2 Temperature 'deg C (IPTS68)' 8.558 8.993 3 Transmissivity %/metre 28.4 48.9 4 Salinity PSS-78 27.9371 29.6097 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 8 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 98070003.ACQ $END *ADMINISTRATION MISSION : 1998-07 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Hake SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : 2 EVENT NUMBER : 3 LATITUDE : 48 53.79000 N ! (deg min) LONGITUDE : 122 57.48000 W ! (deg min) LATITUDE 2 : 48 53.75000 N ! (deg min) LONGITUDE 2 : 122 57.48000 W ! (deg min) WATER DEPTH : 9999 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : WOCE SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1998/03/17 21:48:28.020 END TIME : UTC 1998/03/17 21:53:28.970 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 7211 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dbars 10 -99 (-5.17 3000) Temperature 'Deg c (ITS68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.412E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/09/09 14:17:39 7211 7211 CALIB 7.4 1998/09/14 13:48:42 7211 7211 DESPIKE 1.4 1998/09/14 14:50:56 7211 7211 DELETE 4.4 1998/09/15 09:18:08 7211 903 BOXCAR 2.3 1998/09/15 09:22:27 903 903 CTDEDIT 4.13 1998/09/15 10:52:18 903 890 BINAVE2 1.0 1998/09/16 09:27:49 890 108 REMOVECH 3.1 1998/09/28 09:25:34 108 108 CALIB 7.5 1998/10/27 13:49:03 108 108 HDREDIT2 1.8 2004/01/12 09:26:59 ? ? CLEAN 4.5 2004/01/12 09:27:25 108 108 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:14:34 108 108 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -5.2 Calibration file = w:\ayplee\cal\58483.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 6000.00 .10000 999.000 3.00 Temp 55 5 -2.00 30.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00100 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): .00 Minimum Surface Salinity: 10.000 Surface Swell Pressure Tolerance: .50 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 1.00 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity Number_of_bin -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = w:\ayplee\9807\9807cor.ccf CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. $END !--1--- ---2--- --3-- ---4---- !Pressu Tempera Trans Salinity !re ture missi ! vity !------ ------- ----- -------- *END OF HEADER 0.2 8.923 41.8 27.9371 0.9 8.904 41.5 28.4231 1.9 8.852 40.7 28.4497 3.0 8.823 40.3 28.4626 4.0 8.796 40.2 28.4785 4.9 8.758 40.1 28.5021 6.0 8.712 39.6 28.5179 7.0 8.680 39.3 28.4786 7.9 8.674 39.1 28.4808 9.0 8.658 39.1 28.4955 9.9 8.610 39.3 28.5642 11.0 8.579 40.2 28.6127 12.0 8.560 41.3 28.6422 13.0 8.558 41.8 28.6551 14.1 8.564 42.0 28.6823 15.0 8.572 42.6 28.7015 15.9 8.591 43.4 28.7567 17.0 8.622 44.7 28.8618 17.9 8.627 44.9 28.9080 18.9 8.638 45.5 28.9726 20.1 8.652 47.5 29.0499 21.0 8.655 47.9 29.0891 22.0 8.656 48.0 29.1196 23.0 8.659 48.2 29.1327 23.9 8.660 48.5 29.1433 25.0 8.660 48.7 29.1530 25.9 8.661 48.8 29.1570 27.0 8.662 48.7 29.1599 27.9 8.663 48.9 29.1626 29.0 8.665 48.8 29.1697 30.0 8.673 48.9 29.1926 30.9 8.719 48.8 29.2507 32.0 8.770 48.7 29.2870 33.0 8.794 48.6 29.3041 34.1 8.815 48.4 29.3152 35.0 8.823 48.3 29.3211 36.0 8.856 48.3 29.3359 36.9 8.863 48.2 29.3402 37.9 8.878 48.1 29.3504 39.0 8.916 47.8 29.3644 40.0 8.922 47.5 29.3693 41.1 8.925 47.5 29.3728 42.0 8.919 47.5 29.3750 43.0 8.913 47.5 29.3765 44.0 8.906 47.7 29.3777 45.0 8.907 47.7 29.3793 46.0 8.897 47.8 29.3804 47.1 8.909 47.9 29.3908 48.1 8.914 47.7 29.4049 49.1 8.884 47.8 29.4227 50.0 8.884 48.3 29.4229 51.0 8.884 48.3 29.4244 51.9 8.887 48.1 29.4308 53.0 8.891 47.9 29.4395 54.0 8.900 47.4 29.4489 55.0 8.904 47.3 29.4515 56.0 8.907 47.3 29.4569 57.0 8.909 47.1 29.4636 57.9 8.916 47.0 29.4645 59.0 8.916 46.7 29.4641 59.9 8.921 46.6 29.4713 61.0 8.938 46.5 29.4826 62.0 8.961 45.8 29.4977 63.1 8.981 45.4 29.5099 64.0 8.993 45.1 29.5208 65.1 8.993 44.7 29.5281 66.0 8.987 44.3 29.5324 67.0 8.986 43.9 29.5334 68.1 8.985 43.8 29.5327 69.0 8.985 43.8 29.5334 70.1 8.985 43.8 29.5340 71.0 8.984 43.7 29.5358 72.0 8.981 43.4 29.5372 72.9 8.980 43.5 29.5373 74.0 8.980 43.7 29.5378 75.0 8.981 43.6 29.5381 75.9 8.980 43.6 29.5374 77.0 8.980 43.5 29.5365 78.1 8.980 43.2 29.5376 79.0 8.978 42.6 29.5435 79.9 8.978 42.6 29.5439 81.0 8.979 42.8 29.5420 81.9 8.975 41.9 29.5539 83.0 8.971 40.4 29.5667 83.9 8.971 39.9 29.5683 84.9 8.972 39.8 29.5691 85.9 8.973 39.8 29.5702 87.0 8.975 39.8 29.5712 88.0 8.974 39.5 29.5717 89.0 8.972 39.2 29.5718 89.9 8.970 38.8 29.5714 91.0 8.968 38.2 29.5710 92.1 8.965 37.6 29.5700 92.9 8.963 36.9 29.5701 94.0 8.961 36.1 29.5701 95.0 8.961 36.0 29.5705 96.0 8.961 35.9 29.5703 96.9 8.960 34.9 29.5701 98.0 8.956 34.1 29.5704 99.1 8.957 32.6 29.5759 99.9 8.958 31.2 29.5841 100.9 8.964 29.9 29.5922 102.0 8.969 29.0 29.5971 103.0 8.972 28.8 29.5996 103.9 8.974 28.6 29.6009 105.1 8.975 28.6 29.6027 106.0 8.978 28.6 29.6055 107.0 8.982 28.4 29.6097