*2013/12/16 15:13:18.30 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 52 21.77 N 131 36.51 W 04:47:41 08-23-1997 Alt S stop position 52 21.78 N 131 36.48 W 04:48:54 08-23-1997 *FILE START TIME : UTC 1997/08/23 04:47:39.630 END TIME : UTC 1997/08/23 04:48:54.480 NUMBER OF RECORDS : 38 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 2.1 38.9 2 Temperature 'deg C (IPTS68)' 13.549 15.332 3 Transmissivity %/metre 41 49.3 4 Salinity PSS-78 31.3723 31.573 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280112.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 112 LATITUDE : 52 21.77000 N ! (deg min) LONGITUDE : 131 36.51000 W ! (deg min) LATITUDE 2 : 52 21.78000 N ! (deg min) LONGITUDE 2 : 131 36.48000 W ! (deg min) WATER DEPTH : 66 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/23 04:47:39.630 END TIME : UTC 1997/08/23 04:48:54.480 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1658 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 11:11:48 1658 1658 CALIB 7.3 1998/01/29 15:51:50 1406 1406 DESPIKE 1.4 1998/01/30 13:53:04 1406 1406 DELETE 4.4 1998/01/30 16:36:21 1406 312 BOXCAR 2.3 1998/02/02 13:38:04 312 312 BINAVE2 1.0 1998/02/04 15:46:09 312 38 CALIB 7.3 1998/02/05 11:03:27 38 38 REMOVECH 3.0 1998/02/06 11:04:13 38 38 HEADEDIT 1.1 1998/02/23 16:16:54 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:32 ? ? CLEAN 4.5 2003/10/21 13:23:51 38 38 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:18 38 38 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 2.1 15.328 41.2 31.3752 3.0 15.329 41.0 31.3723 4.0 15.332 41.0 31.3751 5.0 15.161 41.3 31.3835 6.0 14.993 41.5 31.3820 6.9 14.834 41.9 31.3811 8.0 14.721 42.5 31.3824 9.0 14.659 43.2 31.3816 10.1 14.594 44.1 31.3761 11.1 14.572 44.6 31.3736 11.9 14.567 44.4 31.3806 13.0 14.562 44.5 31.3905 14.1 14.523 44.9 31.4004 14.9 14.432 45.7 31.4131 15.9 14.295 46.0 31.4477 17.0 14.263 46.2 31.4562 18.0 14.257 46.4 31.4560 19.0 14.152 46.5 31.4796 19.9 14.111 46.6 31.4895 21.1 14.085 46.9 31.4930 22.0 14.083 46.8 31.4935 23.0 14.076 46.8 31.4924 24.0 14.045 46.9 31.4981 25.0 14.011 47.1 31.5030 26.0 13.922 47.2 31.5182 27.0 13.894 47.4 31.5270 28.1 13.909 47.7 31.5233 29.1 13.729 48.0 31.5477 29.9 13.692 48.4 31.5554 31.0 13.703 48.3 31.5501 32.0 13.701 48.5 31.5491 33.0 13.650 48.6 31.5586 34.0 13.650 48.6 31.5574 34.9 13.641 48.7 31.5563 36.0 13.578 48.9 31.5666 37.0 13.573 49.0 31.5681 38.1 13.559 49.1 31.5709 38.9 13.549 49.3 31.5730