*2013/12/16 15:13:17.61 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 50 22.75 N 128 14.29 W 17:00:42 08-19-1997 Alt S stop position 50 22.74 N 128 14.37 W 17:04:05 08-19-1997 *FILE START TIME : UTC 1997/08/19 17:00:41.820 END TIME : UTC 1997/08/19 17:04:05.090 NUMBER OF RECORDS : 147 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 1 146.8 2 Temperature 'deg C (IPTS68)' 7.297 12.978 3 Transmissivity %/metre 7.3 64.2 4 Salinity PSS-78 31.9728 33.8433 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280086.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 86 LATITUDE : 50 22.75000 N ! (deg min) LONGITUDE : 128 14.29000 W ! (deg min) LATITUDE 2 : 50 22.74000 N ! (deg min) LONGITUDE 2 : 128 14.37000 W ! (deg min) WATER DEPTH : 159 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/19 17:00:41.820 END TIME : UTC 1997/08/19 17:04:05.090 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 4944 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:59:48 4944 4944 CALIB 7.3 1998/01/29 15:46:50 4944 4944 DESPIKE 1.4 1998/01/30 13:48:14 4944 4944 DELETE 4.4 1998/01/30 16:34:34 4944 1264 BOXCAR 2.3 1998/02/02 13:37:04 1264 1264 BINAVE2 1.0 1998/02/04 15:45:29 1264 147 CALIB 7.3 1998/02/05 11:03:11 147 147 REMOVECH 3.0 1998/02/06 11:03:48 147 147 HEADEDIT 1.1 1998/02/23 16:16:36 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:30 ? ? CLEAN 4.5 2003/10/21 13:23:49 147 147 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 147 147 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 1.0 12.978 9.2 31.9728 2.1 12.485 7.7 31.9860 3.0 11.630 7.3 32.0408 4.0 11.161 14.1 32.0888 4.9 10.823 23.0 32.0903 6.0 10.339 31.7 32.1426 7.0 10.051 36.7 32.2092 8.0 9.983 37.7 32.2292 9.0 9.976 37.8 32.2271 10.0 9.916 40.1 32.2285 11.0 9.709 44.9 32.2632 12.0 9.606 46.9 32.2859 13.0 9.568 48.3 32.2917 13.9 9.529 48.9 32.2943 15.0 9.518 48.8 32.2933 16.0 9.507 49.3 32.2938 17.0 9.495 49.6 32.2969 18.0 9.483 49.9 32.2989 19.0 9.475 50.0 32.2996 20.0 9.393 51.6 32.3102 21.0 9.267 53.4 32.3459 22.0 9.130 55.4 32.3911 23.0 9.047 56.9 32.4258 24.0 9.001 57.9 32.4535 25.1 8.973 58.3 32.4673 25.9 8.964 58.4 32.4705 26.9 8.960 58.2 32.4709 28.0 8.956 57.9 32.4720 29.0 8.952 57.9 32.4742 30.0 8.940 58.1 32.4848 31.1 8.928 58.0 32.4927 32.0 8.904 58.5 32.4986 33.0 8.824 59.3 32.5259 33.9 8.762 59.5 32.5537 35.0 8.730 59.5 32.5827 35.9 8.729 59.6 32.5822 37.0 8.706 59.8 32.5873 38.0 8.668 60.2 32.6051 39.0 8.668 60.2 32.6039 39.9 8.666 59.5 32.6053 41.0 8.666 60.1 32.6044 42.0 8.664 60.0 32.6056 43.0 8.664 60.0 32.6052 44.0 8.665 60.2 32.6049 45.0 8.665 60.3 32.6044 46.0 8.662 60.4 32.6025 47.0 8.649 60.6 32.6047 48.1 8.641 60.8 32.6058 49.0 8.637 60.9 32.6057 50.0 8.632 60.9 32.6033 51.0 8.631 61.1 32.6036 51.9 8.619 61.2 32.6095 53.0 8.583 61.3 32.6299 54.1 8.566 61.6 32.6412 55.1 8.546 61.7 32.6557 55.9 8.527 61.9 32.6649 56.9 8.510 62.0 32.6734 58.0 8.504 61.8 32.6760 59.0 8.503 61.8 32.6773 60.0 8.501 61.9 32.6791 61.0 8.500 61.8 32.6796 61.9 8.500 61.3 32.6800 63.0 8.498 62.0 32.6823 63.8 8.496 61.9 32.6837 65.0 8.487 61.7 32.6917 65.9 8.470 61.8 32.7066 67.0 8.448 62.0 32.7275 68.0 8.438 61.9 32.7409 69.0 8.424 61.9 32.7570 69.9 8.413 61.9 32.7673 70.9 8.407 61.9 32.7777 71.9 8.394 61.7 32.7935 73.0 8.377 61.8 32.8076 74.0 8.359 61.8 32.8201 75.0 8.346 61.7 32.8303 76.0 8.318 61.7 32.8589 77.1 8.274 61.5 32.9015 77.9 8.260 61.3 32.9147 78.9 8.238 61.2 32.9317 80.1 8.221 61.2 32.9425 81.0 8.214 61.3 32.9485 82.1 8.211 61.3 32.9505 83.0 8.208 61.4 32.9516 84.1 8.206 61.4 32.9530 85.1 8.206 61.3 32.9542 86.0 8.201 61.3 32.9581 87.0 8.165 61.4 32.9931 88.0 8.122 61.5 33.0422 89.0 8.098 61.5 33.0705 90.0 8.100 61.5 33.0687 91.1 8.097 61.5 33.0714 91.9 8.092 61.5 33.0812 92.9 8.078 61.5 33.1001 94.0 8.056 61.7 33.1268 95.1 7.981 61.9 33.2411 96.0 7.964 62.0 33.2713 97.0 7.961 62.0 33.2785 98.1 7.952 62.1 33.2906 98.9 7.948 62.1 33.2979 99.9 7.945 62.2 33.3028 101.0 7.928 62.4 33.3423 101.9 7.890 63.0 33.4414 102.9 7.879 63.1 33.4978 104.0 7.844 62.9 33.5466 104.9 7.826 62.7 33.5617 106.0 7.812 63.1 33.5894 107.1 7.821 63.8 33.6064 108.0 7.821 64.1 33.6303 109.1 7.800 64.1 33.6524 110.0 7.781 64.2 33.6642 111.0 7.767 64.0 33.6750 112.0 7.742 63.8 33.6880 113.0 7.707 63.4 33.6982 113.9 7.676 63.2 33.7139 115.0 7.632 62.5 33.7300 116.1 7.552 61.5 33.7411 117.0 7.548 61.7 33.7520 117.9 7.575 62.3 33.7591 119.0 7.590 62.7 33.7645 119.9 7.591 62.9 33.7706 121.0 7.583 63.0 33.7758 122.0 7.580 62.9 33.7785 123.0 7.575 62.8 33.7790 124.0 7.563 62.6 33.7805 125.0 7.554 62.4 33.7830 126.0 7.545 62.3 33.7873 127.0 7.500 61.9 33.7894 128.0 7.458 61.4 33.7898 129.0 7.440 61.1 33.7906 130.0 7.432 60.9 33.7925 131.0 7.418 60.6 33.7972 131.9 7.393 60.6 33.8082 133.0 7.380 60.6 33.8141 134.1 7.377 60.6 33.8162 134.9 7.366 60.7 33.8248 136.0 7.357 60.9 33.8272 137.1 7.342 60.8 33.8313 138.0 7.329 60.7 33.8352 138.9 7.312 60.6 33.8402 140.0 7.309 60.6 33.8397 140.9 7.309 60.6 33.8397 142.0 7.309 60.6 33.8407 143.0 7.308 60.6 33.8414 144.0 7.305 60.6 33.8416 145.1 7.301 60.6 33.8425 146.1 7.298 60.6 33.8433 146.8 7.297 60.7 33.8433