*2013/12/16 15:13:17.58 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 50 23.29 N 128 11.15 W 16:17:00 08-19-1997 Alt S stop position 50 23.30 N 128 11.20 W 16:19:26 08-19-1997 *FILE START TIME : UTC 1997/08/19 16:17:00.780 END TIME : UTC 1997/08/19 16:19:27.540 NUMBER OF RECORDS : 118 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 1 117.6 2 Temperature 'deg C (IPTS68)' 7.629 13.609 3 Transmissivity %/metre 4.6 61.7 4 Salinity PSS-78 31.9544 33.5593 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280084.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 84 LATITUDE : 50 23.29000 N ! (deg min) LONGITUDE : 128 11.15000 W ! (deg min) LATITUDE 2 : 50 23.30000 N ! (deg min) LONGITUDE 2 : 128 11.20000 W ! (deg min) WATER DEPTH : 128 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/19 16:17:00.780 END TIME : UTC 1997/08/19 16:19:27.540 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 3300 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:59:34 3300 3300 CALIB 7.3 1998/01/29 15:46:43 3300 3300 DESPIKE 1.4 1998/01/30 13:38:14 3300 3300 DELETE 4.4 1998/01/30 16:34:31 3300 1000 BOXCAR 2.3 1998/02/02 13:37:03 1000 1000 BINAVE2 1.0 1998/02/04 15:45:28 1000 118 CALIB 7.3 1998/02/05 11:03:11 118 118 REMOVECH 3.0 1998/02/06 11:03:46 118 118 HEADEDIT 1.1 1998/02/23 16:16:35 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:30 ? ? CLEAN 4.5 2003/10/21 13:23:49 118 118 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 118 118 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 1.0 13.609 8.6 31.9544 2.0 13.416 8.5 31.9944 3.0 13.346 8.0 32.0004 4.0 12.907 6.7 32.0064 5.1 12.149 4.6 32.0959 5.8 11.943 4.9 32.1148 6.9 11.631 8.2 32.1236 8.0 11.351 12.7 32.1389 9.0 10.984 23.0 32.1498 10.0 10.515 31.8 32.1769 11.0 10.377 36.1 32.1660 12.0 10.278 39.0 32.1756 13.0 10.105 41.3 32.2131 14.1 9.866 44.8 32.2526 14.9 9.605 47.7 32.3062 16.0 9.413 51.1 32.3377 17.0 9.335 52.7 32.3495 18.0 9.270 53.9 32.3668 19.0 9.187 55.4 32.3783 20.0 9.123 56.6 32.4030 20.9 9.098 57.1 32.4115 21.9 9.064 57.6 32.4219 23.1 9.025 58.1 32.4345 23.9 8.999 58.5 32.4379 25.0 8.939 59.1 32.4533 26.0 8.909 59.7 32.4633 26.9 8.894 60.1 32.4708 27.9 8.860 60.2 32.4869 29.0 8.833 60.4 32.5037 30.0 8.824 60.3 32.5105 31.0 8.818 60.3 32.5160 32.0 8.810 60.4 32.5218 33.0 8.804 60.2 32.5274 34.0 8.774 60.4 32.5418 35.0 8.731 60.6 32.5644 36.0 8.650 61.0 32.6041 36.9 8.619 61.3 32.6189 38.0 8.618 61.4 32.6158 39.0 8.616 61.5 32.6174 40.0 8.609 61.5 32.6215 41.0 8.609 61.6 32.6187 42.0 8.603 61.4 32.6206 43.0 8.588 61.5 32.6304 44.0 8.565 61.5 32.6440 45.0 8.529 61.6 32.6664 46.0 8.490 61.7 32.6927 46.9 8.465 61.7 32.7088 48.0 8.445 61.7 32.7238 48.9 8.413 61.7 32.7505 50.1 8.412 61.7 32.7499 51.0 8.412 61.7 32.7517 52.0 8.412 61.6 32.7534 53.1 8.407 61.5 32.7552 54.0 8.402 61.5 32.7576 55.0 8.403 61.5 32.7556 56.1 8.402 61.5 32.7576 57.0 8.402 61.6 32.7591 58.0 8.402 61.6 32.7606 59.0 8.400 61.7 32.7619 60.1 8.399 61.7 32.7624 61.0 8.400 61.6 32.7644 62.1 8.398 61.5 32.7664 62.9 8.395 61.6 32.7686 64.0 8.391 61.6 32.7730 65.1 8.386 61.6 32.7794 65.9 8.382 61.6 32.7839 67.1 8.380 61.6 32.7856 68.1 8.375 61.7 32.7877 68.9 8.375 61.7 32.7878 70.0 8.373 61.7 32.7905 71.0 8.368 61.6 32.7937 71.9 8.366 61.5 32.7978 73.0 8.363 61.5 32.8013 74.0 8.357 61.6 32.8060 75.0 8.350 61.5 32.8138 76.0 8.340 61.5 32.8246 77.1 8.330 61.5 32.8379 78.0 8.305 61.5 32.8583 79.0 8.265 61.5 32.8965 80.0 8.247 61.7 32.9130 81.0 8.237 61.7 32.9213 82.0 8.223 61.7 32.9350 83.0 8.207 61.7 32.9514 84.0 8.194 61.7 32.9632 85.1 8.180 61.6 32.9752 86.0 8.174 61.5 32.9807 87.0 8.165 61.4 32.9889 88.0 8.154 61.2 32.9987 89.0 8.141 61.2 33.0119 90.0 8.126 61.3 33.0275 90.9 8.103 61.2 33.0473 92.0 8.072 61.1 33.0776 92.9 8.052 61.0 33.0971 94.0 8.033 61.0 33.1180 94.9 8.020 60.9 33.1384 96.0 8.005 61.1 33.1673 96.9 7.998 61.1 33.1767 98.0 7.952 60.7 33.2196 99.0 7.919 60.5 33.2400 100.1 7.901 60.4 33.2598 101.0 7.884 60.4 33.2726 101.9 7.881 60.4 33.2768 103.0 7.874 60.3 33.2807 103.9 7.867 60.3 33.2875 105.0 7.861 60.3 33.2964 106.0 7.835 60.2 33.3240 107.0 7.822 60.3 33.3407 108.0 7.816 60.4 33.3501 109.0 7.812 60.4 33.3581 110.0 7.804 60.3 33.3690 110.9 7.796 60.2 33.3771 112.0 7.787 60.1 33.3892 113.0 7.778 60.0 33.3991 114.0 7.756 59.7 33.4231 115.0 7.704 59.6 33.4821 116.0 7.648 59.5 33.5392 117.0 7.639 59.5 33.5501 117.6 7.629 59.9 33.5593