*2013/12/16 15:13:17.50 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 49 20.12 N 126 45.42 W 13:33:26 08-18-1997 Alt S stop position 49 20.11 N 126 45.43 W 13:36:35 08-18-1997 *FILE START TIME : UTC 1997/08/18 13:33:24.770 END TIME : UTC 1997/08/18 13:36:35.130 NUMBER OF RECORDS : 92 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 1 91.7 2 Temperature 'deg C (IPTS68)' 7.568 12.335 3 Transmissivity %/metre 15.6 62.7 4 Salinity PSS-78 31.2731 33.7259 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280078.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 78 LATITUDE : 49 20.12000 N ! (deg min) LONGITUDE : 126 45.42000 W ! (deg min) LATITUDE 2 : 49 20.11000 N ! (deg min) LONGITUDE 2 : 126 45.43000 W ! (deg min) WATER DEPTH : 105 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/18 13:33:24.770 END TIME : UTC 1997/08/18 13:36:35.130 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 4573 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:58:55 4573 4573 CALIB 7.3 1998/01/29 15:46:23 4573 4573 DESPIKE 1.4 1998/01/30 13:37:52 4573 4573 DELETE 4.4 1998/01/30 16:34:25 4573 826 BOXCAR 2.3 1998/02/02 13:37:00 826 826 BINAVE2 1.0 1998/02/04 15:45:25 826 92 CALIB 7.3 1998/02/05 11:03:09 92 92 REMOVECH 3.0 1998/02/06 11:03:43 92 92 HEADEDIT 1.1 1998/02/23 16:16:31 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:29 ? ? CLEAN 4.5 2003/10/21 13:23:49 92 92 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 92 92 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 1.0 12.332 15.6 31.2832 2.0 12.335 15.6 31.2785 3.0 12.312 16.2 31.2842 3.9 12.259 16.7 31.2837 5.0 12.142 19.5 31.2790 6.0 11.888 21.5 31.3195 7.0 11.943 24.9 31.2972 8.0 11.896 27.3 31.2731 9.0 11.395 30.8 31.3388 10.0 11.537 28.2 31.3070 11.0 11.643 26.6 31.3115 12.0 11.470 27.4 31.3380 13.0 11.192 44.6 31.4293 14.0 10.690 56.1 31.5142 14.9 10.498 57.7 31.6404 16.0 10.361 57.5 31.7032 16.9 10.254 57.7 31.7356 17.9 10.160 58.3 31.8089 18.9 10.100 58.1 31.8479 20.1 9.877 57.5 31.9288 21.0 9.710 57.7 32.0095 22.0 9.670 57.8 32.0262 23.0 9.533 57.7 32.0926 24.0 9.229 57.8 32.2227 25.1 9.095 57.8 32.2752 26.1 9.073 57.8 32.2841 27.0 8.989 57.7 32.3264 28.0 8.865 57.5 32.3947 29.0 8.798 57.0 32.4350 30.0 8.758 56.7 32.4638 31.0 8.750 57.4 32.4687 32.0 8.706 58.2 32.4941 33.0 8.647 59.0 32.5259 34.1 8.570 60.2 32.5602 35.0 8.519 60.8 32.6020 36.0 8.450 61.0 32.6394 37.1 8.390 61.2 32.6937 38.0 8.347 61.1 32.7250 39.0 8.353 60.2 32.7301 40.0 8.333 58.6 32.7693 40.9 8.327 58.1 32.7922 42.0 8.328 57.6 32.8045 43.1 8.323 57.2 32.8215 44.0 8.312 57.7 32.8363 45.0 8.287 57.8 32.8572 46.0 8.278 57.6 32.8665 47.0 8.268 57.5 32.8799 48.0 8.253 57.4 32.8845 49.0 8.237 57.4 32.9062 49.9 8.222 57.4 32.9258 51.0 8.194 57.0 32.9525 52.0 8.169 56.4 32.9849 53.0 8.154 56.2 33.0078 53.9 8.146 56.5 33.0239 54.9 8.151 57.9 33.0449 56.0 8.156 59.3 33.0676 56.9 8.157 60.3 33.0741 58.0 8.143 60.8 33.0970 59.1 8.111 58.9 33.1127 60.0 8.080 57.5 33.1259 61.0 8.050 55.8 33.1439 62.1 8.009 55.8 33.1804 62.9 8.004 56.8 33.1998 64.0 8.005 57.5 33.2153 65.1 8.005 57.9 33.2378 66.0 8.007 58.2 33.2525 67.0 8.011 58.5 33.2713 67.9 8.024 58.8 33.2801 69.0 8.037 59.7 33.2803 70.1 8.053 60.3 33.2912 71.0 8.057 60.6 33.2956 72.0 8.064 61.3 33.3067 73.1 8.072 62.1 33.3626 74.0 8.076 62.5 33.3982 75.0 8.027 62.7 33.4527 75.9 8.009 62.7 33.4698 77.0 8.003 62.6 33.4731 78.0 7.977 62.3 33.4839 78.9 7.903 61.8 33.4993 80.1 7.814 61.6 33.5321 81.0 7.746 61.4 33.5598 81.9 7.740 61.2 33.5655 83.0 7.740 60.5 33.6172 84.0 7.725 58.1 33.6571 85.0 7.686 56.2 33.6847 85.9 7.647 53.9 33.6978 87.0 7.603 51.1 33.7182 87.9 7.591 50.1 33.7214 89.0 7.582 49.3 33.7202 89.9 7.573 48.7 33.7218 91.0 7.569 48.4 33.7225 91.7 7.568 48.4 33.7259