*2013/12/16 15:13:17.49 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 49 20.42 N 126 35.60 W 12:33:10 08-18-1997 Alt S stop position 49 20.41 N 126 35.58 W 12:34:50 08-18-1997 *FILE START TIME : UTC 1997/08/18 12:33:08.800 END TIME : UTC 1997/08/18 12:34:50.460 NUMBER OF RECORDS : 42 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.2 41 2 Temperature 'deg C (IPTS68)' 9.156 12.58 3 Transmissivity %/metre 30.1 55.8 4 Salinity PSS-78 30.9858 32.1244 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280076.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 76 LATITUDE : 49 20.42000 N ! (deg min) LONGITUDE : 126 35.60000 W ! (deg min) LATITUDE 2 : 49 20.41000 N ! (deg min) LONGITUDE 2 : 126 35.58000 W ! (deg min) WATER DEPTH : 55 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/18 12:33:08.800 END TIME : UTC 1997/08/18 12:34:50.460 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 2395 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:58:45 2395 2395 CALIB 7.3 1998/01/29 15:46:18 2395 2395 DESPIKE 1.4 1998/01/30 13:37:46 2395 2395 DELETE 4.4 1998/01/30 16:34:22 2395 375 BOXCAR 2.3 1998/02/02 13:36:59 375 375 BINAVE2 1.0 1998/02/04 15:45:24 375 42 CALIB 7.3 1998/02/05 11:03:08 42 42 REMOVECH 3.0 1998/02/06 11:03:42 42 42 HEADEDIT 1.1 1998/02/23 16:16:30 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:29 ? ? CLEAN 4.5 2003/10/21 13:23:49 42 42 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 42 42 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.2 12.580 30.1 30.9860 0.9 12.578 30.1 30.9863 2.0 12.576 30.2 30.9858 3.0 12.527 30.9 30.9940 4.0 12.492 32.6 30.9952 5.0 12.431 36.2 30.9858 5.9 12.341 36.7 30.9975 7.0 12.229 40.1 31.0053 8.0 11.989 46.4 31.0170 9.0 11.789 49.8 31.0470 10.0 11.655 50.9 31.1524 11.0 11.652 51.5 31.2096 12.0 11.550 53.9 31.2436 12.9 11.419 55.2 31.2911 14.0 11.086 55.8 31.3769 15.0 10.944 55.6 31.3984 15.9 10.865 55.1 31.4138 17.0 10.634 54.1 31.4719 17.9 10.307 53.7 31.6046 19.0 10.080 53.0 31.7046 20.0 9.900 52.3 31.7732 20.9 9.793 52.1 31.8093 21.9 9.676 51.7 31.8568 23.0 9.546 50.0 31.9156 24.0 9.517 50.0 31.9276 25.0 9.479 50.3 31.9479 26.1 9.425 50.3 31.9813 27.0 9.415 50.3 31.9883 28.0 9.391 50.4 31.9951 29.0 9.390 50.4 31.9981 30.0 9.339 50.5 32.0185 31.0 9.304 50.7 32.0364 32.0 9.282 50.1 32.0496 33.0 9.256 49.6 32.0657 34.1 9.245 49.3 32.0711 35.0 9.236 49.9 32.0782 36.0 9.197 50.1 32.1038 37.0 9.178 50.9 32.1179 37.9 9.170 50.4 32.1142 38.9 9.163 49.7 32.1154 40.0 9.163 49.7 32.1188 41.0 9.156 50.6 32.1244