*2013/12/16 15:13:17.47 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 49 20.21 N 126 24.00 W 11:34:44 08-18-1997 Alt S stop position 49 20.22 N 126 24.02 W 11:36:08 08-18-1997 *FILE START TIME : UTC 1997/08/18 11:34:43.840 END TIME : UTC 1997/08/18 11:36:08.980 NUMBER OF RECORDS : 26 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 24.7 2 Temperature 'deg C (IPTS68)' 10.726 12.604 3 Transmissivity %/metre 27.6 47.8 4 Salinity PSS-78 30.9916 31.3278 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280074.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 74 LATITUDE : 49 20.21000 N ! (deg min) LONGITUDE : 126 24.00000 W ! (deg min) LATITUDE 2 : 49 20.22000 N ! (deg min) LONGITUDE 2 : 126 24.02000 W ! (deg min) WATER DEPTH : 36 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/18 11:34:43.840 END TIME : UTC 1997/08/18 11:36:08.980 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1864 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:58:36 1864 1864 CALIB 7.3 1998/01/29 15:46:14 1864 1864 DESPIKE 1.4 1998/01/30 13:37:41 1864 1864 DELETE 4.4 1998/01/30 16:34:21 1864 214 BOXCAR 2.3 1998/02/02 13:36:58 214 214 BINAVE2 1.0 1998/02/04 15:45:23 214 26 CALIB 7.3 1998/02/05 11:03:08 26 26 REMOVECH 3.0 1998/02/06 11:03:41 26 26 HEADEDIT 1.1 1998/02/23 16:16:29 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:29 ? ? CLEAN 4.5 2003/10/21 13:23:49 26 26 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 26 26 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.3 12.604 27.7 30.9917 1.0 12.592 27.6 30.9916 2.0 12.575 27.9 30.9916 3.0 12.528 28.5 30.9974 4.0 12.418 29.1 31.0042 4.9 12.378 29.9 31.0115 6.0 12.265 30.2 31.0236 7.0 12.129 30.7 31.0397 8.0 12.023 31.0 31.0240 9.0 11.896 30.9 31.0253 10.1 11.819 30.6 31.0314 11.0 11.701 30.4 31.0442 12.0 11.626 30.6 31.0459 13.0 11.455 30.6 31.0377 13.9 11.346 32.1 31.0476 14.9 11.327 33.1 31.0557 15.9 11.312 33.4 31.0564 17.0 11.302 35.0 31.0575 17.9 11.289 35.5 31.0524 19.0 11.267 37.0 31.0570 20.1 11.243 41.0 31.0631 21.0 11.141 45.7 31.0839 22.0 10.936 47.4 31.1956 23.1 10.791 47.5 31.2827 24.0 10.767 47.8 31.3039 24.7 10.726 47.8 31.3278