*2013/12/16 15:13:17.35 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 49 19.97 N 127 0.09 W 05:19:16 08-18-1997 Alt S stop position 49 19.94 N 127 0.12 W 05:22:00 08-18-1997 *FILE START TIME : UTC 1997/08/18 05:19:16.860 END TIME : UTC 1997/08/18 05:22:00.040 NUMBER OF RECORDS : 119 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 1.1 118.8 2 Temperature 'deg C (IPTS68)' 7.245 13.354 3 Transmissivity %/metre 32.4 64.5 4 Salinity PSS-78 31.7327 33.8932 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280068.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : NONE EVENT NUMBER : 68 LATITUDE : 49 19.97000 N ! (deg min) LONGITUDE : 127 0.09000 W ! (deg min) LATITUDE 2 : 49 19.94000 N ! (deg min) LONGITUDE 2 : 127 0.12000 W ! (deg min) WATER DEPTH : 138 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/18 05:19:16.860 END TIME : UTC 1997/08/18 05:22:00.040 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 3888 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:56:46 3888 3888 CALIB 7.3 1998/01/29 15:45:23 3888 3888 DESPIKE 1.4 1998/01/30 13:36:53 3888 3888 DELETE 4.4 1998/01/30 16:34:06 3888 1014 BOXCAR 2.3 1998/02/02 13:36:49 1014 1014 BINAVE2 1.0 1998/02/04 15:45:17 1014 119 CALIB 7.3 1998/02/05 11:03:05 119 119 REMOVECH 3.0 1998/02/06 11:03:32 119 119 HEADEDIT 1.1 1998/02/23 16:16:25 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:29 ? ? CLEAN 4.5 2003/10/21 13:23:49 119 119 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 119 119 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 1.1 13.354 34.4 31.7339 2.0 13.347 34.3 31.7336 3.0 13.330 34.3 31.7331 4.0 13.339 34.4 31.7327 5.0 13.354 34.4 31.7338 6.0 13.245 32.9 31.7395 7.0 12.392 32.4 31.8760 8.0 11.588 39.7 31.9602 9.0 11.284 42.5 31.9690 10.0 11.134 43.3 31.9957 11.0 11.094 43.9 31.9932 11.9 11.076 44.4 31.9907 13.0 11.020 46.3 31.9964 14.0 10.825 49.5 32.0293 15.0 10.247 52.0 32.1778 15.9 10.076 53.7 32.2206 17.0 9.904 55.2 32.2652 17.9 9.867 56.2 32.2808 19.0 9.637 56.9 32.3115 20.0 9.289 57.8 32.3925 20.9 9.235 58.5 32.3767 22.0 8.977 59.7 32.4660 23.0 8.925 60.4 32.4636 24.0 8.888 60.6 32.4643 25.0 8.786 61.1 32.4803 26.0 8.620 61.8 32.5079 26.9 8.541 62.2 32.5262 28.0 8.509 62.3 32.5179 28.9 8.490 62.4 32.5145 29.9 8.453 62.5 32.5329 31.0 8.448 62.6 32.5376 31.9 8.439 62.7 32.5443 33.0 8.412 62.8 32.5491 34.0 8.397 62.9 32.5520 35.0 8.394 63.1 32.5676 36.1 8.387 63.3 32.5827 37.0 8.344 63.3 32.6013 38.1 8.312 63.4 32.6265 38.9 8.290 63.4 32.6356 40.0 8.294 63.5 32.6371 41.1 8.300 63.6 32.6584 41.9 8.315 63.7 32.6646 43.0 8.320 63.8 32.6915 44.1 8.320 64.0 32.7103 44.9 8.321 64.1 32.8044 46.0 8.323 64.2 32.8568 46.9 8.321 64.2 32.8798 47.9 8.317 64.2 32.8922 49.0 8.323 64.2 32.9181 50.1 8.322 64.4 32.9915 50.9 8.319 64.4 33.0202 51.9 8.324 64.4 33.0489 53.1 8.329 64.4 33.0699 54.0 8.322 64.4 33.1319 54.9 8.315 64.4 33.1573 56.0 8.304 64.4 33.1762 57.0 8.289 64.5 33.2173 58.1 8.273 64.5 33.2444 59.1 8.265 64.5 33.2596 59.9 8.258 64.4 33.2803 61.0 8.254 64.4 33.3220 62.1 8.271 64.4 33.3678 63.0 8.266 64.4 33.3970 64.0 8.258 64.4 33.4118 64.9 8.251 64.5 33.4177 65.9 8.246 64.5 33.4237 67.0 8.234 64.5 33.4373 68.0 8.224 64.5 33.4513 69.0 8.217 64.5 33.4574 70.0 8.211 64.5 33.4624 71.0 8.205 64.5 33.4693 72.0 8.195 64.5 33.4861 72.9 8.186 64.5 33.4997 74.0 8.186 64.5 33.5096 75.0 8.181 64.4 33.5229 75.9 8.169 64.4 33.5385 77.1 8.151 64.4 33.5537 77.9 8.127 64.2 33.5776 78.9 8.115 64.2 33.5894 80.0 8.106 64.2 33.5986 81.0 8.101 64.2 33.5935 82.0 8.087 64.2 33.6109 83.0 8.073 64.2 33.6200 83.9 8.059 64.2 33.6265 84.9 8.044 64.1 33.6380 86.0 8.008 64.1 33.6629 87.0 7.980 64.1 33.6809 88.0 7.948 64.1 33.7002 89.0 7.913 64.0 33.7227 90.0 7.890 64.0 33.7348 91.0 7.864 64.0 33.7413 92.0 7.833 64.0 33.7653 93.0 7.817 64.1 33.7790 93.9 7.795 64.1 33.7900 95.0 7.776 64.1 33.7964 96.1 7.763 64.1 33.8021 97.0 7.753 64.1 33.8083 98.0 7.721 63.8 33.8152 99.0 7.668 63.6 33.8153 100.1 7.620 63.4 33.8236 101.0 7.601 63.2 33.8354 102.1 7.581 62.9 33.8446 102.9 7.556 62.7 33.8487 104.0 7.489 61.7 33.8537 105.0 7.420 60.6 33.8681 106.1 7.395 59.9 33.8730 107.1 7.391 60.0 33.8757 108.0 7.400 60.5 33.8798 109.0 7.407 60.6 33.8819 110.0 7.381 60.1 33.8831 111.0 7.352 59.6 33.8856 112.1 7.330 58.4 33.8846 113.1 7.287 56.0 33.8851 114.0 7.252 54.3 33.8932 115.0 7.249 53.7 33.8912 116.0 7.250 53.4 33.8887 116.9 7.250 53.3 33.8872 117.9 7.247 53.2 33.8908 118.8 7.245 53.1 33.8925