*2013/12/16 15:13:17.19 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 46.16 N 126 10.19 W 09:30:35 08-17-1997 Alt S stop position 48 46.17 N 126 10.27 W 09:33:42 08-17-1997 *FILE START TIME : UTC 1997/08/17 09:30:35.840 END TIME : UTC 1997/08/17 09:33:42.410 NUMBER OF RECORDS : 119 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 117.8 2 Temperature 'deg C (IPTS68)' 7.274 13.477 3 Transmissivity %/metre 20.6 63.4 4 Salinity PSS-78 30.8705 33.8995 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280062.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LD06 EVENT NUMBER : 62 LATITUDE : 48 46.16000 N ! (deg min) LONGITUDE : 126 10.19000 W ! (deg min) LATITUDE 2 : 48 46.17000 N ! (deg min) LONGITUDE 2 : 126 10.27000 W ! (deg min) WATER DEPTH : 133 $REMARKS Station Latitude : 48 46.18 N Longitude : 126 10.20 W Depth : 137 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/17 09:30:35.840 END TIME : UTC 1997/08/17 09:33:42.410 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 4264 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:53:48 4264 4264 CALIB 7.3 1998/01/29 15:44:02 4264 4264 DESPIKE 1.4 1998/01/30 13:35:38 4264 4264 DELETE 4.4 1998/01/30 16:33:40 4264 1035 BOXCAR 2.3 1998/02/02 13:36:36 1035 1035 CTDEDIT 3.2 1998/02/04 14:17:00 1035 1035 BINAVE2 1.0 1998/02/04 15:47:04 1035 119 CALIB 7.3 1998/02/05 11:03:02 119 119 REMOVECH 3.0 1998/02/06 11:03:22 119 119 HEADEDIT 1.1 1998/02/23 16:16:21 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:29 ? ? CLEAN 4.5 2003/10/21 13:23:48 119 119 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 119 119 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.3 13.477 20.6 30.8705 1.1 13.453 22.4 30.8890 2.1 13.439 25.9 30.9194 3.0 13.427 28.9 30.9332 3.9 12.986 27.3 31.0199 5.0 12.562 27.6 31.0851 6.0 12.119 32.8 31.0903 7.0 11.758 29.6 31.0949 8.0 11.724 28.5 31.2736 9.0 11.697 31.2 31.3786 10.0 11.692 33.8 31.4139 11.0 11.717 34.7 31.4752 11.9 11.740 35.3 31.5239 13.1 11.699 40.7 31.5873 14.0 11.551 46.0 31.6361 14.9 11.371 47.6 31.6443 16.0 11.135 49.2 31.6510 17.0 10.931 51.6 31.6525 18.0 10.814 52.3 31.6620 19.0 10.821 52.5 31.6686 20.0 10.828 52.9 31.6701 20.9 10.808 53.3 31.6851 22.0 10.793 53.7 31.6930 23.0 10.750 54.4 31.7102 24.0 10.383 55.9 31.8808 24.9 10.164 56.7 31.9669 26.1 9.992 56.9 32.0265 26.9 9.866 57.5 32.0878 28.0 9.811 58.2 32.1172 29.0 9.761 58.6 32.1416 30.0 9.636 59.2 32.1878 31.0 9.449 59.7 32.2738 32.0 9.318 59.9 32.3260 33.0 9.186 60.4 32.3811 34.0 9.093 61.0 32.4041 35.0 9.007 61.3 32.4340 35.9 8.950 61.6 32.4606 37.0 8.866 61.8 32.4948 38.0 8.847 62.0 32.4913 39.0 8.801 62.0 32.5016 40.1 8.758 62.1 32.5188 41.0 8.717 62.3 32.5327 41.9 8.694 62.2 32.5390 42.9 8.681 62.2 32.5513 44.0 8.650 62.3 32.5688 45.0 8.608 62.4 32.5866 46.0 8.581 62.6 32.5946 47.0 8.553 62.6 32.6130 48.0 8.536 62.7 32.6292 49.0 8.504 62.7 32.6610 50.1 8.466 62.7 32.6785 50.9 8.440 63.0 32.6905 52.0 8.417 62.8 32.7006 53.1 8.407 62.7 32.7046 53.9 8.389 62.9 32.7218 55.1 8.372 63.1 32.7589 55.9 8.355 63.2 32.7873 57.0 8.313 63.3 32.8252 58.0 8.289 63.2 32.8476 59.0 8.277 63.1 32.8787 59.9 8.270 62.9 32.9046 61.0 8.261 62.8 32.9232 62.0 8.257 62.9 32.9306 62.9 8.256 62.9 32.9373 64.0 8.228 62.8 32.9687 65.0 8.217 62.7 32.9924 65.9 8.209 62.6 33.0337 67.0 8.204 62.7 33.0561 68.0 8.201 62.8 33.0792 69.1 8.195 62.9 33.1182 70.0 8.173 63.0 33.1501 71.1 8.159 62.8 33.1703 72.0 8.133 62.7 33.2062 73.1 8.116 62.7 33.2533 74.0 8.098 62.8 33.2810 74.9 8.064 62.6 33.3306 76.0 8.063 62.8 33.3443 77.0 8.060 63.0 33.3721 77.9 8.055 63.1 33.3983 79.0 8.053 63.1 33.4372 80.1 8.058 63.1 33.4497 81.0 8.057 63.2 33.4582 82.0 8.063 63.3 33.4953 83.0 8.065 63.4 33.5256 84.0 8.056 63.4 33.5388 84.9 8.038 63.4 33.5530 86.0 8.019 63.4 33.5601 87.0 8.004 63.3 33.5605 88.0 7.988 63.3 33.5622 89.0 7.962 63.1 33.5729 89.9 7.952 62.9 33.5812 91.0 7.930 62.8 33.6061 91.9 7.898 62.9 33.6272 92.9 7.884 63.1 33.6384 94.0 7.889 63.2 33.6391 95.0 7.889 63.1 33.6403 95.9 7.844 62.0 33.6559 96.9 7.745 61.4 33.6670 98.0 7.673 60.2 33.6782 99.0 7.634 59.5 33.6901 100.0 7.582 58.5 33.7169 101.0 7.569 58.2 33.7274 101.9 7.564 58.1 33.7365 103.0 7.566 58.2 33.7414 104.0 7.563 58.5 33.7584 105.0 7.564 59.1 33.7710 105.9 7.539 59.3 33.7856 107.0 7.500 59.2 33.8023 107.9 7.459 59.2 33.8275 109.0 7.452 59.2 33.8320 109.9 7.451 59.1 33.8304 111.0 7.439 59.1 33.8415 112.0 7.410 59.4 33.8581 112.9 7.394 59.4 33.8670 113.9 7.379 59.3 33.8686 114.9 7.365 59.1 33.8650 115.9 7.335 58.6 33.8728 117.0 7.306 57.9 33.8854 117.8 7.274 56.4 33.8995