*2013/12/16 15:13:17.16 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 58.42 N 125 47.27 W 06:56:32 08-17-1997 Alt S stop position 48 58.43 N 125 47.30 W 06:58:09 08-17-1997 *FILE START TIME : UTC 1997/08/17 06:56:31.760 END TIME : UTC 1997/08/17 06:58:09.140 NUMBER OF RECORDS : 28 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.2 26.8 2 Temperature 'deg C (IPTS68)' 10.016 15.544 3 Transmissivity %/metre 52.2 57 4 Salinity PSS-78 30.7882 31.4601 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280051.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LD02 EVENT NUMBER : 51 LATITUDE : 48 58.43000 N ! (deg min) LONGITUDE : 125 47.27000 W ! (deg min) LATITUDE 2 : 48 58.43000 N ! (deg min) LONGITUDE 2 : 125 47.30000 W ! (deg min) WATER DEPTH : 40 $REMARKS Station Latitude : 48 58.35 N Longitude : 125 47.05 W Depth : 42 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/17 06:56:31.760 END TIME : UTC 1997/08/17 06:58:09.140 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 2125 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:53:22 2125 2125 CALIB 7.3 1998/01/29 15:43:50 2125 2125 DESPIKE 1.4 1998/01/30 13:35:22 2125 2125 DELETE 4.4 1998/01/30 16:33:35 2125 257 BOXCAR 2.3 1998/02/02 13:36:34 257 257 BINAVE2 1.0 1998/02/04 15:45:05 257 28 CALIB 7.3 1998/02/05 11:03:00 28 28 REMOVECH 3.0 1998/02/06 11:03:19 28 28 HEADEDIT 1.1 1998/02/23 16:16:19 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:29 ? ? CLEAN 4.5 2003/10/21 13:23:48 28 28 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:17 28 28 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.2 15.540 53.4 30.7882 0.9 15.543 53.5 30.7910 2.0 15.544 53.4 30.7913 2.9 15.535 53.4 30.7906 4.1 15.528 53.4 30.7912 5.1 14.992 54.0 30.8133 6.0 14.684 54.5 30.8350 7.0 14.326 54.5 30.8230 8.0 13.959 54.3 30.8645 8.9 13.781 53.9 30.8834 10.0 13.470 54.0 30.8946 11.0 12.965 54.7 30.9102 12.0 12.223 54.7 30.9522 13.0 11.636 54.1 31.0230 14.0 11.406 52.8 31.0410 14.9 11.243 52.2 31.0631 15.9 11.129 52.2 31.0916 17.0 11.009 56.0 31.1408 18.0 10.980 57.0 31.1843 19.0 10.806 56.0 31.2509 20.1 10.599 54.8 31.2958 20.9 10.323 54.0 31.3656 22.0 10.149 54.0 31.4279 23.0 10.134 53.4 31.4054 23.9 10.078 53.1 31.4248 25.0 10.056 52.7 31.4343 26.0 10.030 52.4 31.4495 26.8 10.016 52.4 31.4601