*2013/12/16 15:13:16.88 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 18.68 N 125 41.42 W 05:21:47 08-16-1997 Alt S stop position 48 18.71 N 125 41.47 W 05:25:58 08-16-1997 *FILE START TIME : UTC 1997/08/16 05:21:47.530 END TIME : UTC 1997/08/16 05:25:58.410 NUMBER OF RECORDS : 139 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.2 137.8 2 Temperature 'deg C (IPTS68)' 7.406 15.045 3 Transmissivity %/metre 9.4 61.7 4 Salinity PSS-78 31.7595 33.8903 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280041.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LB10 EVENT NUMBER : 41 LATITUDE : 48 18.68000 N ! (deg min) LONGITUDE : 125 41.41000 W ! (deg min) LATITUDE 2 : 48 18.71000 N ! (deg min) LONGITUDE 2 : 125 41.47000 W ! (deg min) WATER DEPTH : 151 $REMARKS Station Latitude : 48 18.57 N Longitude : 125 41.35 W Depth : 151 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/16 05:21:47.530 END TIME : UTC 1997/08/16 05:25:58.410 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 5448 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:48:41 5448 5448 CALIB 7.3 1998/01/29 15:41:51 5448 5448 DESPIKE 1.4 1998/01/30 13:33:22 5448 5448 DELETE 4.4 1998/01/30 16:32:53 5448 1204 BOXCAR 2.3 1998/02/02 13:36:11 1204 1204 BINAVE2 1.0 1998/02/04 15:44:49 1204 139 CALIB 7.3 1998/02/05 11:02:55 139 139 REMOVECH 3.0 1998/02/06 11:03:14 139 139 HEADEDIT 1.1 1998/02/23 16:16:12 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:28 ? ? CLEAN 4.5 2003/10/21 13:23:48 139 139 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 139 139 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.2 15.045 9.4 31.9235 1.0 14.740 10.0 31.9089 2.1 13.410 11.4 31.7595 3.0 12.507 11.8 31.8257 4.1 12.066 12.7 31.9367 5.0 11.906 13.9 31.9915 5.9 11.820 15.7 31.9855 7.0 11.636 19.2 31.9674 8.0 11.500 23.9 31.9695 9.1 11.333 31.9 31.9694 9.9 11.132 38.1 32.0046 10.9 11.002 39.7 32.0251 12.1 10.925 39.8 32.0352 13.0 10.877 40.3 32.0445 14.1 10.815 43.9 32.0778 14.9 10.756 47.8 32.1147 16.0 10.465 51.8 32.2465 17.0 10.269 54.1 32.3156 17.9 10.124 55.8 32.3526 18.9 9.998 57.0 32.3948 20.0 9.919 57.8 32.3986 21.0 9.860 58.4 32.4185 22.0 9.822 59.3 32.4409 23.0 9.686 60.3 32.4629 24.0 9.431 60.6 32.4981 25.0 9.335 60.8 32.5143 26.0 9.303 60.9 32.5222 27.0 9.297 61.1 32.5219 28.0 9.286 61.2 32.5222 29.0 9.283 61.1 32.5221 30.0 9.277 61.2 32.5245 30.9 9.153 61.2 32.5245 32.0 8.913 61.4 32.5590 33.0 8.798 61.5 32.5909 34.0 8.710 61.7 32.5995 35.0 8.666 61.6 32.6097 36.0 8.635 61.5 32.6122 36.9 8.519 61.6 32.6315 38.0 8.367 61.6 32.6890 39.0 8.316 61.7 32.7429 40.0 8.289 61.7 32.7819 41.1 8.273 61.7 32.8006 42.0 8.272 61.7 32.8051 43.0 8.272 61.6 32.8065 44.0 8.262 61.6 32.8172 45.0 8.259 61.5 32.8336 45.9 8.251 61.6 32.8572 47.0 8.245 61.7 32.8764 48.0 8.246 61.7 32.8901 49.0 8.242 61.7 32.9153 50.0 8.242 61.7 32.9531 50.9 8.246 61.7 32.9912 52.0 8.270 61.6 33.0457 53.0 8.283 61.6 33.0623 53.9 8.289 61.6 33.0642 54.9 8.312 61.6 33.1087 56.1 8.316 61.5 33.1484 57.2 8.294 61.5 33.2095 58.0 8.266 61.5 33.2603 59.0 8.270 61.5 33.3115 60.0 8.273 61.6 33.3276 61.0 8.281 61.6 33.3666 62.0 8.268 61.5 33.3945 63.0 8.238 61.5 33.4070 64.0 8.217 61.3 33.4167 65.1 8.187 61.2 33.4309 66.1 8.166 61.2 33.4383 66.9 8.160 61.2 33.4403 68.0 8.154 61.0 33.4427 69.0 8.146 61.0 33.4655 70.0 8.157 60.9 33.4889 71.1 8.150 60.7 33.5066 72.0 8.132 60.5 33.5120 73.0 8.103 60.3 33.5239 74.0 8.089 60.1 33.5380 74.9 8.085 60.1 33.5604 75.9 8.077 60.1 33.5835 77.0 8.079 60.1 33.5971 77.9 8.092 60.1 33.6096 79.0 8.078 60.2 33.6169 80.0 8.045 60.2 33.6237 81.0 8.024 60.0 33.6266 82.0 7.994 59.8 33.6370 83.0 7.995 59.9 33.6617 84.0 7.991 59.9 33.6753 85.0 7.988 59.9 33.6846 86.0 7.982 59.9 33.6920 87.0 7.969 59.9 33.7111 88.1 7.954 60.1 33.7272 89.1 7.929 60.2 33.7448 90.0 7.923 60.2 33.7487 90.9 7.918 60.4 33.7491 91.9 7.911 60.4 33.7542 92.9 7.917 60.5 33.7652 94.0 7.925 60.6 33.7705 95.0 7.913 60.8 33.7761 96.1 7.893 60.9 33.7878 96.9 7.883 60.9 33.7941 98.0 7.861 61.0 33.7971 99.0 7.850 61.0 33.8033 100.0 7.840 61.0 33.8067 101.0 7.832 60.9 33.8087 102.0 7.814 60.8 33.8138 103.0 7.809 60.9 33.8175 104.0 7.807 60.9 33.8180 105.0 7.805 60.9 33.8187 106.0 7.805 60.8 33.8175 107.0 7.800 60.7 33.8179 108.0 7.786 60.6 33.8179 109.1 7.771 60.5 33.8227 110.1 7.754 60.5 33.8270 111.0 7.739 60.4 33.8287 112.0 7.731 60.4 33.8278 113.0 7.710 60.3 33.8346 114.0 7.676 60.1 33.8402 115.0 7.660 59.7 33.8392 116.0 7.632 59.1 33.8392 117.0 7.601 58.7 33.8498 118.0 7.589 58.5 33.8533 119.0 7.569 58.4 33.8581 119.9 7.555 58.2 33.8622 121.0 7.539 58.1 33.8627 122.0 7.517 57.6 33.8667 123.0 7.502 57.3 33.8726 124.0 7.481 56.6 33.8770 125.0 7.461 56.1 33.8834 126.0 7.437 55.2 33.8875 127.0 7.425 54.9 33.8871 128.1 7.420 54.6 33.8865 129.0 7.419 54.5 33.8885 130.0 7.416 54.5 33.8894 131.0 7.412 54.4 33.8902 131.9 7.412 54.4 33.8903 133.0 7.411 54.2 33.8900 134.0 7.410 54.1 33.8895 135.0 7.410 54.1 33.8900 135.9 7.408 54.1 33.8902 136.9 7.406 54.0 33.8900 137.8 7.408 53.9 33.8882