*2013/12/16 15:13:16.85 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 22.07 N 125 34.67 W 04:27:07 08-16-1997 Alt S stop position 48 22.10 N 125 34.67 W 04:30:47 08-16-1997 *FILE START TIME : UTC 1997/08/16 04:27:06.500 END TIME : UTC 1997/08/16 04:30:48.620 NUMBER OF RECORDS : 139 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 137.6 2 Temperature 'deg C (IPTS68)' 7.09 13.997 3 Transmissivity %/metre 24.9 61.9 4 Salinity PSS-78 31.7496 33.9157 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280039.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LB09 EVENT NUMBER : 39 LATITUDE : 48 22.07000 N ! (deg min) LONGITUDE : 125 34.67000 W ! (deg min) LATITUDE 2 : 48 22.10000 N ! (deg min) LONGITUDE 2 : 125 34.67000 W ! (deg min) WATER DEPTH : 152 $REMARKS Station Latitude : 48 22.00 N Longitude : 125 34.80 W Depth : 152 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/16 04:27:06.500 END TIME : UTC 1997/08/16 04:30:48.620 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 5385 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:48:22 5385 5385 CALIB 7.3 1998/01/29 15:41:42 5385 5385 DESPIKE 1.4 1998/01/30 13:33:13 5385 5385 DELETE 4.4 1998/01/30 16:32:50 5385 1226 BOXCAR 2.3 1998/02/02 13:36:10 1226 1226 BINAVE2 1.0 1998/02/04 15:44:48 1226 139 CALIB 7.3 1998/02/05 11:02:54 139 139 REMOVECH 3.0 1998/02/06 11:03:13 139 139 HEADEDIT 1.1 1998/02/23 16:16:11 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:28 ? ? CLEAN 4.5 2003/10/21 13:23:48 139 139 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 139 139 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.3 13.997 24.9 31.7496 0.9 13.719 27.2 31.8190 2.0 13.003 28.9 31.8743 3.0 12.918 29.0 31.8164 4.1 12.665 29.1 31.8042 5.0 12.592 29.4 31.7681 6.0 12.444 30.3 31.7598 7.0 12.158 31.7 31.7976 8.0 11.974 34.0 31.7755 9.0 11.900 34.8 31.7597 10.0 11.828 36.3 31.7678 11.0 11.592 37.9 31.8514 12.0 11.432 39.7 31.9157 13.0 11.361 40.4 31.9189 14.0 11.194 41.1 31.9456 15.1 11.107 43.3 31.9750 15.9 10.934 45.3 32.0119 17.1 10.518 45.6 32.1366 18.0 10.390 46.2 32.1901 19.1 10.333 49.9 32.1982 20.0 10.028 52.4 32.2625 20.9 9.804 54.9 32.3446 22.0 9.662 56.9 32.3992 23.0 9.435 57.5 32.4293 24.0 9.342 58.0 32.4543 25.0 9.205 58.6 32.4903 26.0 9.105 58.9 32.4971 27.0 9.061 58.6 32.4597 28.0 8.961 58.5 32.5067 29.0 8.891 58.8 32.5173 30.0 8.718 58.9 32.5197 30.9 8.665 59.1 32.5147 32.0 8.625 59.3 32.5417 33.0 8.585 59.4 32.5636 34.0 8.546 59.5 32.5711 35.1 8.482 60.1 32.5954 36.0 8.457 60.2 32.6098 37.0 8.425 60.2 32.6235 38.0 8.423 60.2 32.6346 38.9 8.391 60.2 32.6678 39.9 8.375 60.1 32.6797 41.0 8.360 60.2 32.6948 42.0 8.348 60.6 32.7077 43.0 8.335 60.6 32.7258 44.0 8.319 60.9 32.7529 45.0 8.320 60.9 32.7648 46.0 8.323 60.9 32.7936 47.0 8.319 61.2 32.8339 47.9 8.311 61.5 32.8450 49.0 8.303 61.5 32.8474 50.0 8.292 61.4 32.8513 51.0 8.289 61.3 32.8852 52.0 8.257 61.2 32.9203 53.1 8.207 61.4 32.9541 53.9 8.189 61.3 32.9613 55.0 8.173 61.5 32.9789 56.0 8.162 61.5 33.0070 56.9 8.175 61.5 33.0420 58.0 8.202 61.5 33.0939 59.0 8.188 61.5 33.1080 60.0 8.166 61.7 33.1207 61.1 8.154 61.7 33.1294 62.0 8.130 61.5 33.1358 63.0 8.120 61.5 33.1507 64.0 8.110 61.4 33.1672 65.0 8.095 60.8 33.1737 66.0 8.057 60.0 33.1954 66.9 8.027 59.5 33.2254 68.0 7.992 59.0 33.2553 68.9 7.971 58.9 33.2777 69.9 7.946 59.3 33.3287 70.9 7.947 60.0 33.3783 72.1 7.967 60.6 33.4177 73.0 7.966 60.8 33.4332 74.1 7.960 61.2 33.4818 74.9 7.935 61.2 33.5236 75.9 7.925 61.3 33.5469 77.0 7.924 61.3 33.5500 78.0 7.922 61.2 33.5552 79.1 7.903 61.0 33.5687 79.9 7.885 61.0 33.5862 81.0 7.894 61.3 33.6062 82.0 7.900 61.5 33.6283 83.1 7.900 61.7 33.6441 83.9 7.898 61.7 33.6512 84.9 7.894 61.7 33.6735 86.1 7.883 61.7 33.6998 87.0 7.877 61.7 33.7102 88.0 7.873 61.7 33.7203 89.1 7.869 61.7 33.7283 89.9 7.864 61.9 33.7323 91.0 7.858 61.8 33.7371 92.1 7.831 61.6 33.7504 92.9 7.809 61.6 33.7592 93.9 7.790 61.5 33.7639 94.9 7.776 61.3 33.7657 96.0 7.753 61.3 33.7719 97.0 7.730 61.3 33.7783 98.1 7.704 61.3 33.7906 98.9 7.681 61.3 33.8062 100.0 7.645 61.2 33.8132 101.0 7.611 60.9 33.8161 102.1 7.592 60.9 33.8185 102.9 7.590 60.9 33.8189 104.0 7.583 60.9 33.8251 104.9 7.569 60.8 33.8326 106.1 7.471 59.4 33.8369 107.0 7.382 58.4 33.8419 107.9 7.304 57.7 33.8669 109.0 7.289 57.5 33.8736 110.1 7.274 57.4 33.8754 111.0 7.269 57.2 33.8747 111.9 7.264 57.1 33.8786 113.0 7.254 57.0 33.8866 114.1 7.244 56.9 33.8969 115.1 7.233 56.5 33.9028 116.0 7.206 56.1 33.9096 117.0 7.200 55.9 33.9106 118.0 7.197 55.8 33.9084 119.0 7.194 55.8 33.9067 120.0 7.193 55.5 33.9075 121.0 7.167 53.1 33.9064 122.1 7.142 51.6 33.9098 123.1 7.125 50.6 33.9118 124.0 7.115 49.7 33.9134 125.0 7.103 48.6 33.9154 125.9 7.101 47.6 33.9143 127.1 7.100 47.1 33.9125 128.0 7.094 46.8 33.9121 128.9 7.094 46.2 33.9139 130.0 7.092 46.2 33.9151 131.0 7.090 46.4 33.9154 132.1 7.090 46.5 33.9156 132.9 7.092 46.1 33.9135 134.0 7.092 46.0 33.9132 135.0 7.093 45.7 33.9157 136.0 7.093 45.6 33.9157 137.1 7.093 45.7 33.9150 137.6 7.091 45.7 33.9148