*2013/12/16 15:13:16.52 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 28.76 N 125 21.71 W 10:46:31 08-13-1997 Alt S stop position 48 28.75 N 125 21.69 W 10:50:05 08-13-1997 *FILE START TIME : UTC 1997/08/13 10:46:30.410 END TIME : UTC 1997/08/13 10:50:05.890 NUMBER OF RECORDS : 145 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 144 2 Temperature 'deg C (IPTS68)' 6.926 14.99 3 Transmissivity %/metre 31 65.9 4 Salinity PSS-78 31.7887 33.9201 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280029.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LB07 EVENT NUMBER : 29 LATITUDE : 48 28.76000 N ! (deg min) LONGITUDE : 125 21.71000 W ! (deg min) LATITUDE 2 : 48 28.75000 N ! (deg min) LONGITUDE 2 : 125 21.69000 W ! (deg min) WATER DEPTH : 160 $REMARKS Station Latitude : 48 28.68 N Longitude : 125 22.10 W Depth : 160 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/13 10:46:30.410 END TIME : UTC 1997/08/13 10:50:05.890 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 5193 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:42:21 5193 5193 CALIB 7.3 1998/01/29 15:38:52 5193 5193 DESPIKE 1.4 1998/01/30 13:30:37 5193 5193 DELETE 4.4 1998/01/30 16:31:59 5193 1188 BOXCAR 2.3 1998/02/02 13:35:49 1188 1188 BINAVE2 1.0 1998/02/04 15:44:28 1188 145 CALIB 7.3 1998/02/05 11:02:46 145 145 REMOVECH 3.0 1998/02/06 11:03:01 145 145 HEADEDIT 1.1 1998/02/23 16:16:03 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:27 ? ? CLEAN 4.5 2003/10/21 13:23:47 145 145 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 145 145 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.3 14.988 31.0 31.7887 1.0 14.988 31.0 31.7916 2.0 14.990 31.0 31.7909 3.0 14.989 31.1 31.7913 4.0 14.985 31.9 31.7917 4.9 14.945 33.0 31.7925 5.9 14.800 34.8 31.7973 6.9 14.491 35.8 31.8275 8.1 14.237 36.1 31.8185 8.9 14.211 36.2 31.8100 10.0 14.189 36.4 31.8181 11.1 14.079 37.1 31.8254 11.9 13.920 37.4 31.8289 13.0 13.303 37.4 31.8874 14.0 12.803 40.6 31.9226 14.8 12.049 46.9 31.8583 16.0 11.181 53.5 32.0919 17.0 10.717 56.4 32.2959 18.0 10.540 57.4 32.2675 19.0 10.338 58.7 32.2691 20.0 10.198 60.0 32.3013 21.0 9.919 60.8 32.3679 22.0 9.541 62.0 32.4826 23.0 9.352 62.5 32.6156 23.9 9.194 63.2 32.6452 25.0 8.943 63.7 32.7128 26.1 8.895 64.2 32.7304 27.0 8.846 64.3 32.7774 28.0 8.758 64.6 32.8453 29.0 8.700 64.5 32.8414 29.9 8.649 64.8 32.8631 31.0 8.610 65.2 32.8949 31.9 8.411 65.6 33.0445 33.1 8.251 65.6 33.1337 34.0 8.153 65.9 33.1823 35.0 8.088 65.8 33.2173 35.8 8.056 65.7 33.2358 37.0 7.950 65.5 33.3172 38.0 7.890 65.5 33.3499 38.9 7.834 65.4 33.3789 40.0 7.812 65.4 33.3938 41.0 7.794 65.2 33.4150 42.1 7.767 64.9 33.4390 43.1 7.732 64.7 33.4770 44.0 7.702 64.7 33.4982 44.9 7.689 64.4 33.5031 46.0 7.643 64.0 33.5355 47.0 7.584 63.5 33.5671 47.9 7.557 63.4 33.5815 49.0 7.544 63.3 33.5775 50.0 7.526 63.1 33.5834 51.0 7.507 63.0 33.5977 51.9 7.489 62.8 33.6154 53.1 7.467 62.6 33.6224 54.0 7.447 62.4 33.6337 55.1 7.439 62.3 33.6392 56.0 7.417 62.1 33.6409 57.0 7.409 62.0 33.6531 58.0 7.396 61.9 33.6601 59.0 7.374 61.8 33.6665 60.0 7.357 61.5 33.6693 61.0 7.329 61.5 33.6951 62.1 7.309 61.5 33.7097 62.9 7.311 61.5 33.7119 64.0 7.307 61.5 33.7222 65.1 7.298 61.6 33.7308 66.1 7.291 61.1 33.7406 67.1 7.270 60.6 33.7415 67.9 7.249 60.3 33.7455 68.9 7.243 59.9 33.7481 69.9 7.233 59.8 33.7543 71.1 7.210 59.4 33.7617 71.9 7.196 59.1 33.7720 73.0 7.185 58.7 33.7839 74.1 7.153 58.4 33.8004 74.9 7.132 58.2 33.8097 76.1 7.120 58.0 33.8185 77.0 7.101 58.0 33.8266 78.0 7.083 57.8 33.8313 79.0 7.069 57.6 33.8386 79.9 7.065 57.3 33.8427 80.9 7.054 57.1 33.8462 82.0 7.045 57.0 33.8525 83.0 7.042 57.1 33.8550 84.0 7.028 57.3 33.8626 85.0 7.015 57.3 33.8689 86.1 7.008 57.0 33.8753 87.0 6.995 56.6 33.8802 87.9 6.988 56.4 33.8823 89.0 6.986 56.3 33.8848 89.8 6.982 56.2 33.8863 91.0 6.978 56.0 33.8884 92.0 6.972 55.8 33.8904 93.0 6.973 55.8 33.8923 93.9 6.973 55.8 33.8933 95.0 6.973 55.6 33.8934 95.9 6.972 55.3 33.8937 97.0 6.968 55.1 33.8984 98.0 6.967 55.0 33.8999 99.0 6.966 54.9 33.8992 100.1 6.966 54.7 33.8986 101.0 6.965 54.8 33.8993 101.9 6.966 54.8 33.9003 102.9 6.966 54.7 33.9010 104.0 6.966 54.5 33.9016 105.0 6.965 54.4 33.9028 105.9 6.966 54.3 33.9037 107.1 6.965 54.3 33.9050 107.9 6.965 54.3 33.9051 109.0 6.964 54.3 33.9050 110.0 6.963 54.2 33.9058 110.9 6.960 54.0 33.9067 112.1 6.961 53.8 33.9069 113.0 6.961 53.6 33.9072 114.0 6.960 53.5 33.9080 115.0 6.959 53.3 33.9082 116.0 6.959 53.1 33.9091 117.0 6.959 53.0 33.9082 118.0 6.960 52.9 33.9089 118.9 6.962 52.9 33.9088 119.9 6.962 52.6 33.9097 121.1 6.961 52.3 33.9104 121.9 6.959 52.4 33.9101 123.0 6.954 52.6 33.9103 124.0 6.951 53.1 33.9099 125.0 6.950 53.3 33.9109 125.9 6.951 53.0 33.9122 126.9 6.951 52.4 33.9128 127.9 6.951 52.1 33.9133 128.9 6.951 51.8 33.9123 130.1 6.945 50.9 33.9103 131.0 6.929 50.3 33.9095 132.0 6.926 49.9 33.9109 132.9 6.928 49.0 33.9122 133.9 6.932 46.7 33.9144 135.1 6.934 45.3 33.9158 136.0 6.934 44.8 33.9165 137.0 6.934 43.3 33.9172 138.0 6.933 42.5 33.9176 139.0 6.933 42.4 33.9175 140.0 6.933 40.7 33.9176 141.0 6.932 39.5 33.9183 142.0 6.932 37.9 33.9189 143.1 6.928 36.2 33.9195 144.0 6.927 35.9 33.9201