*2013/12/16 15:13:16.49 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 32.28 N 125 15.47 W 09:39:45 08-13-1997 Alt S stop position 48 32.30 N 125 15.44 W 09:42:44 08-13-1997 *FILE START TIME : UTC 1997/08/13 09:39:43.490 END TIME : UTC 1997/08/13 09:42:44.140 NUMBER OF RECORDS : 99 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.4 97.9 2 Temperature 'deg C (IPTS68)' 7.041 14.835 3 Transmissivity %/metre 18.1 65.5 4 Salinity PSS-78 31.8022 33.8562 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280027.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LB06 EVENT NUMBER : 27 LATITUDE : 48 32.28000 N ! (deg min) LONGITUDE : 125 15.47000 W ! (deg min) LATITUDE 2 : 48 32.30000 N ! (deg min) LONGITUDE 2 : 125 15.44000 W ! (deg min) WATER DEPTH : 118 $REMARKS Station Latitude : 48 32.18 N Longitude : 125 15.51 W Depth : 118 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/13 09:39:43.490 END TIME : UTC 1997/08/13 09:42:44.140 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 4234 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:42:03 4234 4234 CALIB 7.3 1998/01/29 15:38:44 4234 4234 DESPIKE 1.4 1998/01/30 13:30:26 4234 4234 DELETE 4.4 1998/01/30 16:31:56 4234 910 BOXCAR 2.3 1998/02/02 13:35:48 910 910 BINAVE2 1.0 1998/02/04 15:44:27 910 99 CALIB 7.3 1998/02/05 11:02:46 99 99 REMOVECH 3.0 1998/02/06 11:02:59 99 99 HEADEDIT 1.1 1998/02/23 16:16:02 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:27 ? ? CLEAN 4.5 2003/10/21 13:23:47 99 99 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 99 99 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.4 14.835 25.4 31.8022 1.0 14.834 25.5 31.8028 2.0 14.831 25.6 31.8029 3.0 14.824 25.7 31.8045 3.9 14.816 25.9 31.8067 5.1 14.798 26.1 31.8116 6.0 14.781 26.6 31.8151 7.0 14.747 27.0 31.8227 8.0 14.704 27.9 31.8276 8.9 14.508 31.3 31.8367 10.0 13.962 33.1 31.8642 10.9 13.526 31.0 31.8957 12.0 13.129 25.8 31.9177 13.0 12.882 20.8 31.9280 14.0 12.411 18.1 32.0007 15.0 12.266 18.2 32.0056 16.0 12.113 19.3 32.0198 17.0 11.856 28.2 32.0461 18.1 11.469 42.9 32.1269 19.1 10.999 53.1 32.1784 20.1 10.778 57.4 32.1909 21.0 10.480 58.0 32.2507 22.0 10.257 58.6 32.3235 23.0 9.924 59.1 32.4119 24.0 9.558 59.6 32.5393 25.0 9.422 61.4 32.5692 26.1 9.353 62.3 32.5703 27.1 9.239 62.8 32.6268 28.0 9.194 62.9 32.6356 29.0 9.123 63.4 32.6634 30.0 9.045 64.0 32.6931 31.0 8.995 64.4 32.7220 32.1 8.923 64.5 32.7681 32.9 8.865 64.6 32.8115 34.0 8.663 65.0 32.8856 35.0 8.552 65.1 32.9402 36.0 8.460 65.3 33.0072 37.0 8.371 65.3 33.0536 38.0 8.259 65.3 33.1037 39.0 8.230 65.5 33.1410 39.9 8.077 65.5 33.2184 41.0 7.981 65.3 33.2888 41.9 7.937 64.4 33.3189 43.0 7.859 63.6 33.3643 44.1 7.844 63.7 33.3729 45.0 7.814 64.2 33.3916 46.0 7.727 64.1 33.4334 47.0 7.670 63.8 33.4666 48.0 7.658 63.8 33.4749 48.9 7.646 63.6 33.4888 50.0 7.637 63.5 33.4989 51.0 7.616 63.5 33.5012 52.0 7.619 63.5 33.5035 53.1 7.624 63.5 33.4914 53.9 7.621 63.4 33.4906 55.0 7.619 63.4 33.4979 56.0 7.618 63.3 33.5050 57.0 7.606 63.1 33.5107 58.0 7.598 63.0 33.5194 59.0 7.585 63.0 33.5219 60.0 7.583 63.0 33.5248 61.0 7.582 63.2 33.5251 62.0 7.575 63.3 33.5292 63.0 7.566 63.1 33.5350 64.0 7.552 62.9 33.5449 65.0 7.535 62.6 33.5608 65.9 7.510 62.4 33.5739 67.0 7.471 62.0 33.5954 68.0 7.450 61.8 33.6192 68.9 7.433 61.7 33.6298 69.9 7.400 61.5 33.6495 71.0 7.354 61.1 33.6755 71.9 7.331 60.9 33.6921 73.0 7.309 60.7 33.7159 74.1 7.245 60.3 33.7361 74.9 7.217 60.1 33.7573 76.0 7.203 59.8 33.7690 77.0 7.193 59.5 33.7793 78.0 7.177 59.1 33.7828 79.0 7.170 58.9 33.7953 80.1 7.161 58.6 33.7945 80.9 7.150 58.3 33.7948 81.9 7.126 57.7 33.8162 83.0 7.106 57.2 33.8245 84.0 7.100 57.0 33.8276 85.0 7.090 56.8 33.8302 86.0 7.090 56.6 33.8324 86.9 7.084 56.4 33.8363 88.0 7.078 56.1 33.8379 89.1 7.075 55.7 33.8395 89.9 7.067 55.3 33.8416 91.0 7.067 55.1 33.8431 92.0 7.061 55.5 33.8472 93.0 7.055 56.0 33.8513 93.9 7.052 56.3 33.8535 95.0 7.048 56.5 33.8562 96.0 7.046 56.2 33.8542 97.0 7.042 56.0 33.8549 97.9 7.041 55.9 33.8551