*2013/12/16 15:13:16.46 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 34.05 N 125 11.91 W 08:58:30 08-13-1997 Alt S stop position 48 34.02 N 125 11.94 W 09:01:31 08-13-1997 *FILE START TIME : UTC 1997/08/13 08:58:29.480 END TIME : UTC 1997/08/13 09:01:31.060 NUMBER OF RECORDS : 86 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 1.1 85.6 2 Temperature 'deg C (IPTS68)' 7.089 13.325 3 Transmissivity %/metre 29 64.5 4 Salinity PSS-78 31.0944 33.8332 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280025.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LB05 EVENT NUMBER : 25 LATITUDE : 48 34.05000 N ! (deg min) LONGITUDE : 125 11.91000 W ! (deg min) LATITUDE 2 : 48 34.02000 N ! (deg min) LONGITUDE 2 : 125 11.94000 W ! (deg min) WATER DEPTH : 109 $REMARKS Station Latitude : 48 34.00 N Longitude : 125 12.00 W Depth : 109 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/13 08:58:29.480 END TIME : UTC 1997/08/13 09:01:31.060 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 4418 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:41:42 4418 4418 CALIB 7.3 1998/01/29 15:38:35 4418 4418 DESPIKE 1.4 1998/01/30 13:30:14 4418 4418 DELETE 4.4 1998/01/30 16:31:53 4418 802 BOXCAR 2.3 1998/02/02 13:35:47 802 802 BINAVE2 1.0 1998/02/04 15:44:25 802 86 CALIB 7.3 1998/02/05 11:02:45 86 86 REMOVECH 3.0 1998/02/06 11:02:58 86 86 HEADEDIT 1.1 1998/02/23 16:16:01 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:27 ? ? CLEAN 4.5 2003/10/21 13:23:47 86 86 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 86 86 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 1.1 13.325 29.0 31.0944 2.0 13.248 32.9 31.1114 3.0 13.029 35.8 31.1454 4.0 12.957 36.7 31.1981 5.1 12.902 36.4 31.2216 6.0 12.499 37.6 31.4670 7.0 11.615 41.1 31.8095 8.0 11.110 44.1 31.8565 8.9 10.846 47.0 31.8292 10.0 10.369 49.1 31.8956 11.0 10.083 51.6 31.8705 12.0 9.896 53.5 31.8676 13.0 9.634 56.6 31.8977 14.1 9.445 57.5 31.9294 15.0 9.418 57.6 31.9349 15.9 9.403 57.9 31.9480 17.0 9.391 58.2 31.9612 18.0 9.381 58.3 31.9694 18.9 9.389 58.4 31.9689 20.0 9.377 58.4 31.9782 21.0 9.333 58.8 32.0382 22.0 9.250 58.6 32.1266 23.0 9.229 58.9 32.1548 24.0 9.176 59.2 32.2086 25.0 9.155 59.3 32.2391 26.0 9.156 59.5 32.2528 26.9 9.156 59.6 32.2670 28.0 9.165 59.3 32.3068 29.0 9.205 59.3 32.3256 30.0 9.233 59.1 32.3475 31.0 9.306 59.0 32.3855 32.0 9.373 59.0 32.4156 32.9 9.392 59.1 32.4425 34.0 9.396 59.4 32.4632 34.9 9.385 59.7 32.4777 36.0 9.356 59.9 32.5055 37.0 9.243 60.5 32.5549 38.1 9.136 61.3 32.6125 39.0 9.007 62.3 32.6761 40.0 8.809 63.0 32.7719 41.0 8.633 63.3 32.8636 42.0 8.538 63.8 32.9220 43.0 8.458 64.1 32.9813 44.0 8.339 64.4 33.0988 45.0 8.145 64.5 33.2172 46.0 8.086 64.3 33.2122 47.0 8.046 64.1 33.2310 48.0 8.026 64.5 33.2602 48.8 8.004 64.5 33.2717 50.0 7.981 64.5 33.2757 50.9 7.934 64.5 33.3171 52.0 7.889 64.3 33.3391 53.1 7.849 63.7 33.3615 53.9 7.823 63.3 33.3934 55.0 7.780 62.5 33.4229 56.0 7.756 62.0 33.4433 56.9 7.732 61.7 33.4579 58.0 7.692 61.2 33.4830 59.0 7.624 60.0 33.5399 60.0 7.517 59.5 33.5944 61.0 7.472 59.4 33.6251 62.0 7.453 59.6 33.6353 62.9 7.418 60.0 33.6573 64.0 7.375 59.9 33.6648 65.0 7.362 59.9 33.6766 65.9 7.361 60.0 33.6802 67.0 7.361 60.2 33.6743 68.1 7.357 59.8 33.6776 69.1 7.317 59.3 33.6962 69.9 7.301 59.1 33.7097 71.0 7.288 59.2 33.7214 71.9 7.261 59.2 33.7395 73.1 7.230 58.9 33.7503 73.9 7.187 58.7 33.7813 75.0 7.168 58.5 33.7925 75.9 7.154 57.7 33.8005 77.0 7.126 57.1 33.8161 77.9 7.110 56.6 33.8207 78.9 7.104 56.0 33.8224 80.0 7.100 55.4 33.8275 81.0 7.094 54.9 33.8314 82.0 7.093 54.6 33.8299 83.0 7.093 54.4 33.8293 83.9 7.093 54.2 33.8319 85.0 7.089 53.9 33.8331 85.6 7.090 53.9 33.8332