*2013/12/16 15:13:16.38 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 40.40 N 124 59.39 W 06:31:16 08-13-1997 Alt S stop position 48 40.39 N 124 59.38 W 06:32:34 08-13-1997 *FILE START TIME : UTC 1997/08/13 06:31:15.430 END TIME : UTC 1997/08/13 06:32:34.080 NUMBER OF RECORDS : 25 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 23.8 2 Temperature 'deg C (IPTS68)' 10.353 12.261 3 Transmissivity %/metre 17.6 54 4 Salinity PSS-78 30.6943 31.2167 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280017.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LB01 EVENT NUMBER : 17 LATITUDE : 48 40.40000 N ! (deg min) LONGITUDE : 124 59.39000 W ! (deg min) LATITUDE 2 : 48 40.39000 N ! (deg min) LONGITUDE 2 : 124 59.38000 W ! (deg min) WATER DEPTH : 33 $REMARKS Station Latitude : 48 40.40 N Longitude : 124 59.48 W Depth : 33 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/13 06:31:15.430 END TIME : UTC 1997/08/13 06:32:34.080 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1714 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:40:42 1714 1714 CALIB 7.3 1998/01/29 15:38:09 1714 1714 DESPIKE 1.4 1998/01/30 13:29:37 1714 1714 DELETE 4.4 1998/01/30 16:31:44 1714 199 BOXCAR 2.3 1998/02/02 13:35:44 199 199 BINAVE2 1.0 1998/02/04 15:44:22 199 25 CALIB 7.3 1998/02/05 11:02:43 25 25 REMOVECH 3.0 1998/02/06 11:02:56 25 25 HEADEDIT 1.1 1998/02/23 16:15:56 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:27 ? ? CLEAN 4.5 2003/10/21 13:23:47 25 25 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 25 25 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.3 11.877 38.7 30.6943 1.0 11.974 28.3 30.7189 2.1 12.035 21.4 30.7236 3.0 12.145 17.6 30.7211 4.0 12.261 19.7 30.7014 5.0 12.040 33.1 30.7019 5.9 11.514 39.0 30.7596 6.9 11.498 42.5 30.7595 7.9 11.486 43.1 30.7691 8.9 11.415 42.6 30.8079 10.0 11.280 42.6 30.8669 11.0 11.194 43.6 30.9036 12.0 11.058 44.1 30.9734 13.0 11.025 46.0 30.9774 13.8 10.869 46.8 31.0272 15.0 10.817 47.2 31.0601 16.0 10.790 47.8 31.0702 17.0 10.763 49.0 31.0796 17.8 10.654 50.4 31.1222 19.0 10.530 51.2 31.1666 20.0 10.484 51.9 31.1793 20.9 10.452 52.3 31.1818 21.9 10.407 52.9 31.1919 23.0 10.369 53.6 31.2167 23.8 10.353 54.0 31.2093