*2013/12/16 15:13:16.22 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 46.96 N 125 34.06 W 09:04:40 08-11-1997 Alt S stop position 48 46.99 N 125 34.15 W 09:07:08 08-11-1997 *FILE START TIME : UTC 1997/08/11 09:04:40.780 END TIME : UTC 1997/08/11 09:07:08.250 NUMBER OF RECORDS : 117 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 115.6 2 Temperature 'deg C (IPTS68)' 7.939 13.564 3 Transmissivity %/metre 0.7 58.6 4 Salinity PSS-78 30.8352 33.1674 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280005.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LC03 EVENT NUMBER : 5 LATITUDE : 48 46.96000 N ! (deg min) LONGITUDE : 125 34.06000 W ! (deg min) LATITUDE 2 : 48 46.99000 N ! (deg min) LONGITUDE 2 : 125 34.15000 W ! (deg min) WATER DEPTH : 120 $REMARKS Station Latitude : 48 46.95 N Longitude : 125 34.24 W Depth : 120 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/11 09:04:40.780 END TIME : UTC 1997/08/11 09:07:08.250 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 3462 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:38:58 3462 3462 CALIB 7.3 1998/01/29 15:37:22 3462 3462 DESPIKE 1.4 1998/01/30 13:28:30 3462 3462 DELETE 4.4 1998/01/30 16:31:31 3462 972 BOXCAR 2.3 1998/02/02 13:35:38 972 972 BINAVE2 1.0 1998/02/04 15:44:15 972 117 CALIB 7.3 1998/02/05 11:02:37 117 117 REMOVECH 3.0 1998/02/06 11:02:52 117 117 HEADEDIT 1.1 1998/02/23 16:15:50 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:27 ? ? CLEAN 4.5 2003/10/21 13:23:46 117 117 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 117 117 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.3 13.561 4.8 30.8573 0.9 13.563 4.8 30.8576 2.0 13.563 4.8 30.8575 3.0 13.564 4.8 30.8574 4.0 13.543 3.2 30.8454 5.1 12.974 1.1 30.8352 6.0 12.545 0.7 30.9058 6.9 12.421 0.9 30.9124 8.0 12.290 1.7 30.9074 9.0 12.161 5.2 30.8967 9.9 11.879 14.8 30.9086 11.0 11.703 26.1 30.9336 11.9 11.572 36.2 30.9558 13.0 11.429 43.5 30.9509 14.0 11.370 46.1 30.9527 14.9 11.346 47.5 30.9626 16.0 11.185 48.6 30.9714 17.0 10.993 49.8 31.0057 18.0 10.795 50.4 31.0710 18.9 10.735 50.5 31.0953 20.0 10.706 50.6 31.1072 21.0 10.688 51.8 31.1209 22.1 10.616 52.6 31.1517 23.1 10.576 53.2 31.1760 23.9 10.518 53.5 31.2002 25.0 10.440 53.9 31.2447 25.9 10.406 54.1 31.2636 26.8 10.338 54.1 31.2778 28.0 10.078 54.0 31.4067 29.0 9.931 54.0 31.4790 29.9 9.916 54.2 31.4853 31.0 9.869 54.4 31.5033 32.0 9.802 54.6 31.5213 32.9 9.779 54.7 31.5333 34.0 9.747 54.5 31.5487 35.0 9.696 54.4 31.5762 35.9 9.672 54.4 31.5996 37.1 9.614 55.1 31.6578 38.0 9.541 55.6 31.6951 38.9 9.452 55.5 31.7455 40.0 9.378 55.6 31.8024 41.0 9.331 55.6 31.8343 41.9 9.309 55.6 31.8571 43.0 9.251 55.8 31.9040 44.0 9.208 55.9 31.9431 45.0 9.174 55.9 31.9666 45.9 9.118 56.2 32.0172 47.1 9.063 56.2 32.0715 48.0 8.984 56.0 32.1292 49.0 8.886 55.6 32.2136 50.0 8.833 55.2 32.2596 50.9 8.783 54.9 32.3088 52.1 8.782 55.0 32.3454 53.0 8.811 55.8 32.3751 53.9 8.833 56.2 32.3802 55.0 8.849 56.9 32.3910 56.0 8.866 58.1 32.4486 57.0 8.843 58.6 32.4942 58.0 8.795 58.2 32.5161 59.0 8.706 57.3 32.5436 59.9 8.687 57.2 32.5647 61.0 8.673 57.4 32.5799 62.0 8.670 57.6 32.5942 63.0 8.644 57.3 32.5993 64.0 8.553 56.3 32.6124 65.1 8.508 55.8 32.6596 66.0 8.472 55.4 32.6941 67.1 8.463 55.5 32.7053 68.1 8.437 55.5 32.7350 68.9 8.415 55.7 32.7542 70.1 8.400 55.5 32.7665 71.1 8.377 55.3 32.7834 72.0 8.365 55.4 32.7982 72.8 8.356 55.4 32.8079 73.9 8.342 55.4 32.8228 75.0 8.333 55.4 32.8288 75.9 8.319 55.4 32.8349 77.0 8.303 55.4 32.8488 78.0 8.280 55.1 32.8700 79.0 8.259 54.4 32.8893 80.1 8.254 54.6 32.8973 81.0 8.242 54.5 32.8998 82.0 8.212 53.9 32.9149 83.1 8.174 53.4 32.9392 83.9 8.167 53.3 32.9455 84.9 8.161 53.2 32.9509 86.1 8.151 52.8 32.9635 87.0 8.138 52.6 32.9793 87.9 8.132 52.7 32.9896 89.1 8.125 52.6 32.9957 90.1 8.118 52.5 33.0031 91.0 8.087 51.9 33.0316 92.0 8.044 51.5 33.0688 93.0 8.034 51.3 33.0798 94.0 8.030 51.1 33.0830 95.1 8.025 51.0 33.0909 96.0 8.010 50.7 33.1027 97.0 7.995 50.3 33.1179 98.0 7.982 50.1 33.1281 99.1 7.975 50.0 33.1318 99.9 7.974 49.9 33.1331 100.9 7.968 49.5 33.1383 102.0 7.962 49.1 33.1466 103.1 7.957 49.0 33.1511 104.0 7.954 49.1 33.1522 105.0 7.954 48.8 33.1513 105.9 7.954 48.5 33.1510 107.0 7.953 48.0 33.1544 108.0 7.954 47.8 33.1551 109.0 7.953 47.6 33.1564 110.1 7.950 47.2 33.1573 111.0 7.951 47.1 33.1571 111.9 7.946 47.0 33.1605 113.0 7.945 47.0 33.1623 113.9 7.941 46.9 33.1663 115.0 7.940 46.7 33.1672 115.6 7.939 46.7 33.1674