*2013/12/16 15:13:16.19 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 48 48.73 N 125 30.86 W 08:34:27 08-11-1997 Alt S stop position 48 48.74 N 125 30.90 W 08:36:35 08-11-1997 *FILE START TIME : UTC 1997/08/11 08:34:27.860 END TIME : UTC 1997/08/11 08:36:35.950 NUMBER OF RECORDS : 97 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 0.2 96 2 Temperature 'deg C (IPTS68)' 8.1 14.375 3 Transmissivity %/metre 4.5 59.6 4 Salinity PSS-78 30.7544 33.0872 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 3 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F REAL*4 4 $END $REMARKS File name : 97280003.ACQ $END *ADMINISTRATION MISSION : 1997-28 AGENCY : PBS, Stock Assessment Division, Nanaimo, B.C. COUNTRY : Canada PROJECT : Laperouse SCIENTIST : Saunders M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : WCVI, Laperouse Bank STATION : LC02 EVENT NUMBER : 3 LATITUDE : 48 48.73000 N ! (deg min) LONGITUDE : 125 30.85000 W ! (deg min) LATITUDE 2 : 48 48.74000 N ! (deg min) LONGITUDE 2 : 125 30.90000 W ! (deg min) WATER DEPTH : 170 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8709 CTD MODEL : AST SERIAL NUMBER : 58483 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP3000TC2 $END *RAW START TIME : UTC 1997/08/11 08:34:27.860 END TIME : UTC 1997/08/11 08:36:35.950 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 3014 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !-------------------- ---------------- ---- ------ ------------ Pressure Dbars 10 -99 (-4 3000) Temperature 'DEG C (ITS 68)' 10 -99 (0.387E-01 0.9991) Conductivity_Ratio n/a 63 -99 (0.4E-03 0.9996) Transmissivity %/m 10 -99 (100.918 -2.01997) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.18363E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1998/01/29 10:38:43 3014 3014 CALIB 7.3 1998/01/29 15:37:16 3014 3014 DESPIKE 1.4 1998/01/30 13:28:21 3013 3013 DELETE 4.4 1998/01/30 16:31:28 3013 824 BOXCAR 2.3 1998/02/02 13:35:37 824 824 BINAVE2 1.0 1998/02/04 15:44:14 824 97 CALIB 7.3 1998/02/05 11:02:36 97 97 REMOVECH 3.0 1998/02/06 11:02:51 97 97 HEADEDIT 1.1 1998/02/23 16:15:48 ' ' ' ' HDREDIT2 1.8 2003/10/21 13:23:26 ? ? CLEAN 4.5 2003/10/21 13:23:46 97 97 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:13:16 97 97 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = -4.0 Calibration file = v:\ctd\9728\9728.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 1500.00 .10000 999.000 3.00 Temp 55 5 1.00 20.00 .00100 999.000 3.00 sali 55 5 10.00 35.00 .00050 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .10 Pressure NOT filtered Swells deleted. Warning message if pressure difference of .50 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Tran Temp Sal -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = v:\ctd\9728\9728_cor.ccf -The following CHANNEL(S) were removed from file. conductivity_ratio Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 0.2 14.375 6.9 30.7578 0.9 14.375 11.1 30.7544 2.0 14.366 11.9 30.7561 2.9 14.348 11.7 30.7547 4.0 13.951 8.2 30.7696 5.0 12.851 4.8 30.8625 6.0 12.586 4.5 30.8730 6.9 12.420 4.5 30.8786 8.0 12.103 7.1 30.8665 9.0 11.782 12.8 30.8574 10.0 11.523 21.9 30.8416 11.0 11.391 28.7 30.8677 12.0 11.331 37.7 30.8842 13.0 11.301 41.9 30.8942 14.1 11.280 42.1 30.9093 15.0 11.217 40.2 30.9210 16.0 11.158 41.4 30.9299 17.0 11.122 44.3 30.9477 17.9 11.096 46.4 30.9556 19.0 11.057 47.3 30.9772 20.1 11.008 46.2 30.9953 21.0 10.970 45.4 30.9997 21.9 10.797 44.5 31.0607 22.9 10.637 46.0 31.1288 24.0 10.524 48.5 31.1910 25.0 10.336 51.1 31.2576 25.9 10.167 54.7 31.3241 27.0 10.098 55.8 31.3570 28.0 9.995 56.4 31.4084 29.0 9.913 56.8 31.4639 29.9 9.890 56.7 31.4828 31.0 9.859 56.3 31.5327 32.0 9.846 56.2 31.5910 32.9 9.830 56.2 31.6106 34.0 9.825 56.4 31.6205 35.1 9.759 56.5 31.6602 36.0 9.662 56.7 31.7050 36.9 9.568 57.2 31.7982 38.0 9.554 57.5 31.8166 39.0 9.466 57.7 31.8665 40.0 9.365 57.9 31.9805 41.1 9.263 58.9 32.0796 42.0 9.147 59.3 32.1465 43.0 9.060 59.6 32.2405 44.1 8.992 59.5 32.3145 44.9 8.977 59.4 32.3479 46.0 8.958 59.4 32.3925 46.9 8.926 59.2 32.4454 48.0 8.876 59.0 32.4989 49.0 8.862 59.0 32.5116 50.0 8.854 59.0 32.5158 51.0 8.826 59.0 32.5184 52.0 8.809 58.7 32.5320 53.0 8.779 58.4 32.5501 54.0 8.749 58.0 32.5899 55.0 8.695 57.7 32.6261 56.0 8.651 57.3 32.6563 57.0 8.609 55.8 32.6619 57.9 8.550 55.6 32.6897 59.0 8.536 55.4 32.7058 60.0 8.520 54.9 32.7154 61.0 8.518 55.1 32.7345 62.0 8.523 55.6 32.7424 63.0 8.516 55.5 32.7520 64.0 8.488 55.0 32.7717 65.0 8.478 55.1 32.7816 66.1 8.481 55.7 32.7917 67.0 8.472 56.1 32.8031 68.0 8.466 56.3 32.8028 68.9 8.468 56.3 32.8026 70.0 8.449 55.9 32.8142 71.0 8.418 55.1 32.8304 72.0 8.399 54.3 32.8403 73.1 8.382 54.1 32.8456 74.1 8.374 54.0 32.8523 75.0 8.375 54.3 32.8567 76.0 8.376 54.4 32.8605 77.0 8.375 54.7 32.8654 77.9 8.369 54.9 32.8740 79.0 8.359 55.0 32.8875 80.1 8.328 54.7 32.9106 80.9 8.302 53.2 32.9291 82.0 8.280 51.8 32.9430 83.1 8.268 51.8 32.9612 84.1 8.241 48.0 32.9741 84.9 8.224 46.7 32.9859 86.0 8.221 46.3 32.9877 86.9 8.215 46.0 32.9892 88.0 8.207 44.7 32.9934 89.0 8.188 43.2 33.0173 90.0 8.182 42.5 33.0301 91.0 8.180 42.7 33.0368 92.0 8.174 42.3 33.0476 93.0 8.162 41.8 33.0607 93.9 8.149 42.5 33.0712 95.1 8.119 42.0 33.0780 96.0 8.100 41.1 33.0872