*2013/12/16 15:10:47.44 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1996/06/09 13:22:24.000 NUMBER OF RECORDS : 23 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 22 2 Temperature 'deg C (IPTS68)' 9.1273 9.9397 3 Salinity PSS-78 31.4782 31.7086 4 Number_of_bin_records n/a 3 11 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F REAL*4 4 4 -99 ' ' 5 I I 0 $END *ADMINISTRATION MISSION : 1996-17 AGENCY : PBS, Nanaimo, B.C. COUNTRY : Canada PROJECT : Hecate Strait Survey SCIENTIST : Fargo J. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Hecate Strait, Queen Charlotte Sound STATION : H201 EVENT NUMBER : 76 LATITUDE : 53 14.40000 N ! (deg min) LONGITUDE : 131 16.40000 W ! (deg min) *INSTRUMENT TYPE : Guildline CTD MODEL : 8709 SERIAL NUMBER : 57743 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------------- -------------- ---------- Pressure n/a ? Temperature n/a ? Conductivity_Ratio n/a ? $END $REMARKS Acquisition program: CTD_1.18 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- RAW_CNVT 3.5 1996/10/22 12:31:32 1135 1135 CLEAN 2.0 1996/10/24 08:57:31 263 263 CALIB 7.1 1996/10/24 09:10:04 263 263 DESPIKE 1.4 1996/10/24 10:19:35 263 263 DELETE 4.4 1996/10/24 10:26:28 263 193 CLEAN 2.0 1996/10/24 10:52:36 193 193 BOXCAR 2.3 1996/10/24 10:57:35 193 193 BINAVE 2.0 1996/10/24 11:03:08 193 23 HEADEDIT 1.1 1997/02/24 18:42:10 ' ' ' ' REMOVECH 3.0 1997/02/24 18:44:50 23 23 HDREDIT2 1.7 2003/09/24 14:55:03 ? ? CLEAN 4.4 2003/09/24 14:55:08 23 23 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:10:47 23 23 $END $REMARKS -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following CALIB parameters were used: Calibration type = C Salinity is computed Pressure offset = .0 Calibration file = 9617.cal -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 600.00 .10000 999.000 2.50 Temp 55 5 3.00 20.00 .00100 999.000 2.50 Cond 55 5 .50 1.00 .00050 999.000 2.50 Sali 55 5 10.00 40.00 .01000 999.000 2.50 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *RAW START TIME : UTC 1996/06/09 13:22:24.000 END TIME : UTC 1996/06/09 13:24:40.000 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1135 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION START TIME : UTC 1996/06/09 13:22:24.000 $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 ' ' (0 1) Temperature 'DEG C (ITS68)' 10 ' ' (0 1) Conductivity_Ratio n/a 10 ' ' (0 1) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 () (0 1) Temperature 'DEG C (ITS68)' 10 -99 () (0.197E-01 0.9996) Conductivity_Ratio n/a 10 -99 () (0.1E-03 1.0012) $END *COMMENTS !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.0 9.9380 31.4782 3 1.0 9.9358 31.4806 8 2.0 9.9397 31.4850 10 3.0 9.9321 31.4892 8 4.0 9.9289 31.4854 8 5.0 9.9247 31.4887 10 6.0 9.9283 31.4888 8 7.0 9.9327 31.4861 8 8.0 9.9277 31.4922 9 9.0 9.9233 31.4918 9 10.0 9.9127 31.4939 9 11.0 9.9139 31.4943 8 12.0 9.9096 31.4928 8 13.0 9.9014 31.4966 9 14.0 9.8476 31.5133 9 15.0 9.7487 31.5495 9 16.0 9.6033 31.5954 7 17.0 9.5523 31.6117 7 18.0 9.5009 31.6280 9 19.0 9.3562 31.6646 9 20.0 9.2462 31.6864 9 21.0 9.1689 31.7004 8 22.0 9.1273 31.7086 11