*2013/12/16 15:10:47.40 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1996/06/09 10:04:08.000 NUMBER OF RECORDS : 22 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 21 2 Temperature 'deg C (IPTS68)' 9.8976 9.9233 3 Salinity PSS-78 31.4717 31.481 4 Number_of_bin_records n/a 3 16 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F REAL*4 4 4 -99 ' ' 5 I I 0 $END *ADMINISTRATION MISSION : 1996-17 AGENCY : PBS, Nanaimo, B.C. COUNTRY : Canada PROJECT : Hecate Strait Survey SCIENTIST : Fargo J. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Hecate Strait, Queen Charlotte Sound STATION : G201 EVENT NUMBER : 74 LATITUDE : 53 27.10000 N ! (deg min) LONGITUDE : 131 19.50000 W ! (deg min) *INSTRUMENT TYPE : Guildline CTD MODEL : 8709 SERIAL NUMBER : 57743 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------------- -------------- ---------- Pressure n/a ? Temperature n/a ? Conductivity_Ratio n/a ? $END $REMARKS Acquisition program: CTD_1.18 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- RAW_CNVT 3.5 1996/10/22 12:31:30 1107 1107 CLEAN 2.0 1996/10/24 08:57:30 333 333 CALIB 7.1 1996/10/24 09:10:02 333 333 DESPIKE 1.4 1996/10/24 10:19:33 333 333 DELETE 4.4 1996/10/24 10:26:26 333 191 CLEAN 2.0 1996/10/24 10:52:35 191 191 BOXCAR 2.3 1996/10/24 10:57:34 191 191 BINAVE 2.0 1996/10/24 11:03:07 191 22 HEADEDIT 1.1 1997/02/24 18:42:09 ' ' ' ' REMOVECH 3.0 1997/02/24 18:44:49 22 22 HDREDIT2 1.7 2003/09/24 14:55:03 ? ? CLEAN 4.4 2003/09/24 14:55:08 22 22 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:10:47 22 22 $END $REMARKS -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following CALIB parameters were used: Calibration type = C Salinity is computed Pressure offset = .0 Calibration file = 9617.cal -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 600.00 .10000 999.000 2.50 Temp 55 5 3.00 20.00 .00100 999.000 2.50 Cond 55 5 .50 1.00 .00050 999.000 2.50 Sali 55 5 10.00 40.00 .01000 999.000 2.50 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *RAW START TIME : UTC 1996/06/09 10:04:08.000 END TIME : UTC 1996/06/09 10:06:21.000 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1107 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION START TIME : UTC 1996/06/09 10:04:08.000 $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 ' ' (0 1) Temperature 'DEG C (ITS68)' 10 ' ' (0 1) Conductivity_Ratio n/a 10 ' ' (0 1) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 () (0 1) Temperature 'DEG C (ITS68)' 10 -99 () (0.197E-01 0.9996) Conductivity_Ratio n/a 10 -99 () (0.1E-03 1.0012) $END *COMMENTS !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.0 9.9194 31.4782 3 1.0 9.9202 31.4778 6 2.0 9.9210 31.4771 6 3.0 9.9215 31.4771 6 4.0 9.9233 31.4774 8 5.0 9.9207 31.4787 10 6.0 9.9147 31.4810 10 7.0 9.9110 31.4777 9 8.0 9.9071 31.4792 8 9.0 9.9065 31.4789 8 10.0 9.9067 31.4784 10 11.0 9.9047 31.4779 10 12.0 9.9077 31.4742 9 13.0 9.9062 31.4760 8 14.0 9.9052 31.4805 8 15.0 9.9046 31.4785 8 16.0 9.9044 31.4770 9 17.0 9.9052 31.4810 10 18.0 9.9034 31.4787 11 19.0 9.9005 31.4780 9 20.0 9.8976 31.4784 9 21.0 9.9052 31.4717 16