*2013/12/16 15:10:46.40 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1996/06/04 19:09:48.000 NUMBER OF RECORDS : 20 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 19 2 Temperature 'deg C (IPTS68)' 9.0089 10.4925 3 Salinity PSS-78 30.6749 31.2929 4 Number_of_bin_records n/a 5 32 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F REAL*4 4 4 -99 ' ' 5 I I 0 $END *ADMINISTRATION MISSION : 1996-17 AGENCY : PBS, Nanaimo, B.C. COUNTRY : Canada PROJECT : Hecate Strait Survey SCIENTIST : Fargo J. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Hecate Strait, Queen Charlotte Sound STATION : C303 EVENT NUMBER : 39 LATITUDE : 54 7.30000 N ! (deg min) LONGITUDE : 131 4.80000 W ! (deg min) *INSTRUMENT TYPE : Guildline CTD MODEL : 8709 SERIAL NUMBER : 57743 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------------- -------------- ---------- Pressure n/a ? Temperature n/a ? Conductivity_Ratio n/a ? $END $REMARKS Acquisition program: CTD_1.18 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- RAW_CNVT 3.5 1996/10/22 12:30:50 5980 5980 CLEAN 2.0 1996/10/24 08:56:42 466 466 CALIB 7.1 1996/10/24 09:00:42 466 466 DESPIKE 1.4 1996/10/24 10:18:23 466 466 DELETE 4.4 1996/10/24 10:25:21 466 295 CLEAN 2.0 1996/10/24 10:51:45 295 295 BOXCAR 2.3 1996/10/24 10:56:55 295 295 BINAVE 2.0 1996/10/24 11:02:31 295 20 HEADEDIT 1.1 1997/02/24 18:41:45 ' ' ' ' REMOVECH 3.0 1997/02/24 18:44:35 20 20 HDREDIT2 1.7 2003/09/24 14:55:00 ? ? CLEAN 4.4 2003/09/24 14:55:06 20 20 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:10:46 20 20 $END $REMARKS -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following CALIB parameters were used: Calibration type = C Salinity is computed Pressure offset = .0 Calibration file = 9617.cal -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 600.00 .10000 999.000 2.50 Temp 55 5 3.00 20.00 .00100 999.000 2.50 Cond 55 5 .50 1.00 .00050 999.000 2.50 Sali 55 5 10.00 40.00 .01000 999.000 2.50 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *RAW START TIME : UTC 1996/06/04 19:09:48.000 END TIME : UTC 1996/06/04 19:21:45.000 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 5980 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION START TIME : UTC 1996/06/04 19:09:48.000 $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 ' ' (0 1) Temperature 'DEG C (ITS68)' 10 ' ' (0 1) Conductivity_Ratio n/a 10 ' ' (0 1) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 () (0 1) Temperature 'DEG C (ITS68)' 10 -99 () (0.197E-01 0.9996) Conductivity_Ratio n/a 10 -99 () (0.1E-03 1.0012) $END *COMMENTS !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.0 10.4925 30.6825 5 1.0 10.4900 30.6842 10 2.0 10.4811 30.6826 14 3.0 10.4841 30.6825 17 4.0 10.4792 30.6841 11 5.0 10.4727 30.6749 15 6.0 10.4696 30.6819 16 7.0 10.4590 30.6910 13 8.0 10.4580 30.6869 12 9.0 10.4510 30.6862 11 10.0 10.4389 30.6856 15 11.0 10.4194 30.6831 13 12.0 10.2662 30.6930 12 13.0 10.0002 30.7186 16 14.0 9.7325 30.8111 17 15.0 9.5077 30.9591 10 16.0 9.3680 31.1114 21 17.0 9.2885 31.1670 25 18.0 9.0612 31.2705 32 19.0 9.0089 31.2929 10