*2013/12/16 15:10:08.18 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1996/06/19 19:19:00.000 NUMBER OF RECORDS : 8 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Down FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 11 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 121.3 2 Sample_Number n/a 184 191 3 Salinity:Bottle PSS-78 21.121 30.561 4 Oxygen:Dissolved mL/L 4.151 6.989 5 Oxygen:Dissolved umol/kg 181.1 307.4 6 Nitrate_plus_Nitrite umol/L 5 27.8 7 Silicate umol/L 28.7 50.1 8 Phosphate umol/L 0.6 2.31 9 Temperature 'deg C (IPTS68)' 8.8696 12.8842 10 Salinity PSS-78 22.6777 30.5707 11 Transmissivity %/metre 11.95389 67.37717 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 5 I I 0 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 7 F ' ' 2 9 -99 ' ' 9 F ' ' 4 10 -99 ' ' 9 F REAL*4 4 11 -99 ' ' 6 F ' ' 1 $END $REMARKS Raw data in file 96110042 VI03 = 10.02 ! Volume of iodate standard (cm**3) NI03 = .01012923 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) UFLAG = -1 ! 0|-1, -1 indicates DO_mass is valid Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ File name : 96110041.ACQ Comments from secondary file: c:\data_D\temp\9611\96110042.chm -------------------------------------------------------------- Raw data in file 96110042 VI03 = 10.02 ! Volume of iodate standard (cm**3) NI03 = .01012923 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) UFLAG = -1 ! 0|-1, -1 indicates DO_mass is valid Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ File name : 96110041.ACQ $END *ADMINISTRATION MISSION : 1996-11 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Strait of Georgia SCIENTIST : Juhasz T. PLATFORM : Vector CONTACT : Mary O'Brien ! custom item *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : MI03 EVENT NUMBER : 42 LATITUDE : 48 55.15000 N ! (deg min) LONGITUDE : 123 10.82000 W ! (deg min) WATER DEPTH : 125 $REMARKS Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ Station Latitude : 48 55.22 N Longitude : 123 10.77 W Depth : 124 Comments from secondary file: c:\data_D\temp\9611\96110042.chm -------------------------------------------------------------- Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ Station Latitude : 48 55.22 N Longitude : 123 10.77 W Depth : 124 $END *INSTRUMENT TYPE : Bottle MODEL : Niskin 10 litre $REMARKS Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman Dosimat (model 665) and a PC 900 Colorimeter. Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC4 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- AutoOxy.bas 1.8 1996/06/20 02:01:06 ' ' 8 OxyRedo.bas 1.0 1996/07/12 09:24:46 8 8 SORT 2.3 1996/08/06 16:05:02 8 8 CLEAN 2.0 1996/08/07 11:51:11 8 8 SORT 2.3 1997/03/13 12:44:58 8 8 MERGE 1.0 1997/03/13 13:00:17 8 8 REVERSE 1.1 1998/08/21 15:59:09 ? ? CLEAN 2.6 1998/08/21 16:10:37 8 8 REMOVECH 3.1 1998/08/24 09:56:58 8 8 MERGE 2.2 1998/08/24 10:07:27 8 8 MERGE 2.2 1998/08/24 10:43:50 8 8 HDREDIT2 1.0 1998/08/24 10:59:52 ? ? REMOVECH 3.1 1998/08/31 14:14:11 8 8 HDREDIT2 1.0 1998/08/31 14:32:17 ? ? MERGE 2.3 1999/11/18 14:59:03 8 8 REMOVECH 6.0 2003/09/24 13:21:30 8 8 HDREDIT2 1.7 2003/09/24 13:24:14 ? ? CLEAN 4.4 2003/09/24 13:24:51 8 8 CALIB 11.4 2004/06/02 09:19:50 8 8 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:10:08 8 8 $END $REMARKS C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' OxyRedo fixs DO_mass and DO_volumne when incorrect values for VIO3, NIO3, blank, or standard have been entered. -The following SORT parameters were used. Sorted by channel: PRESSURE Pressure channel sorted according to values in sort channel -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following SORT parameters were used. Sorted by channel: consecutive_no Pressure channel sorted according to values in sort channel Sort in Ascending Order -The following MERGE parameters were used: Primary File Extension: h1 Secondary File Extension: nut Merge Channel: Consecutive_no Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Pressure,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:v Secondary Channels to Include: Consecutive_no,Nitrate_plus_nitrite,Silicate,Orthophosphate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. SALINITY:BOTTLE -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrate_plus_nitrite,S Secondary Channels to Include: Salinity:bottle Primary file : d:\geostr\9611\iosshell\96110042.rem Secondary file: d:\geostr\9611\iosshell\96110042.ios -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrat Secondary Channels to Include: Temperature,Salinity:ctd,Transmissivity Primary file : d:\geostr\9611\iosshell\96110042.mg2 Secondary file: d:\geostr\9611\iosshell\96110042.dw2 Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = .0 Calibration file = C:\IOSSHELL\CALFILES\guild.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 500.00 .10000 999.000 3.00 Temp 55 5 .00 30.00 .00500 999.000 3.00 Cond 55 5 .00 1.00 .00010 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): .0000 Sample period (sec): .0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .50 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. Transmissivity -The following MERGE parameters were used: Merge Channel: pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, consecutive_no, Salinity:Bottle, Dissolved_Oxygen:vol, Dissolved_Oxygen:mas, nitrate_plus_nitrite, silicate, orthophosphate, Temperature, Salinity:ctd Secondary Channels to Include: Transmissivity Primary file : c:\data_D\temp\9611\96110042.che Secondary file: c:\data_D\temp\9611\96110042.chm Comments from secondary file: c:\data_D\temp\9611\96110042.chm -------------------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' OxyRedo fixs DO_mass and DO_volumne when incorrect values for VIO3, NIO3, blank, or standard have been entered. -The following SORT parameters were used. Sorted by channel: PRESSURE Pressure channel sorted according to values in sort channel -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following SORT parameters were used. Sorted by channel: consecutive_no Pressure channel sorted according to values in sort channel Sort in Ascending Order -The following MERGE parameters were used: Primary File Extension: h1 Secondary File Extension: nut Merge Channel: Consecutive_no Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Pressure,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:v Secondary Channels to Include: Consecutive_no,Nitrate_plus_nitrite,Silicate,Orthophosphate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. SALINITY:BOTTLE -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrate_plus_nitrite,S Secondary Channels to Include: Salinity:bottle Primary file : d:\geostr\9611\iosshell\96110042.rem Secondary file: d:\geostr\9611\iosshell\96110042.ios -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: -The following CHANNEL(S) were removed from file. CLEAN functions: - Reset #RECS, MIN & MAX values in header. -The following CALIB parameters were used: $END *COMMENTS Salinity sample #191 shows values of 21.1207 and 20.1205 Salinity sample #187 shows values of 29.3212 and 29.3116 Oxygen sample #189 had two stir bars in flask, data questionable. Comments from secondary file: D:\CRUISES\GS9697\9611\iosshell\96110042.nut -------------------------------------------------------------------------- Information on nutrient data : "See file 9611nuts.csv for nutrient data including averages, replicates and quality flags." "See file 9611nuts.txt for description of methods used to analyze nutrients, list of raw data files, description of quality flags and comments on data." "See excel file 9611nuts.xls for data, methods, depth profiles, comments etc.; This is the main source file." "Raw data files : 960709.aaz, 960710.aaz, 960711.aaz (.anz, .wk1 and .xls files with same names also); " 9611nuts.mel is the data file (excel file v5) as provided by the contractor. Samples were frozen onboard ship using a quick freezer and stored in a -20 deg C freezer until analysis at IOS Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 ------------------------------------------------------------------ Alt S start position 48 55.16 N 123 10.82 W 19:16:10 06-19-1996 Alt S stop position 48 55.15 N 123 10.78 W 19:19:27 06-19-1996 Comments from secondary file: c:\data_D\temp\9611\96110042.chm -------------------------------------------------------------- Salinity sample #191 shows values of 21.1207 and 20.1205 Salinity sample #187 shows values of 29.3212 and 29.3116 Oxygen sample #189 had two stir bars in flask, data questionable. Comments from secondary file: D:\CRUISES\GS9697\9611\iosshell\96110042.nut -------------------------------------------------------------------------- Information on nutrient data : "See file 9611nuts.csv for nutrient data including averages, replicates and quality flags." "See file 9611nuts.txt for description of methods used to analyze nutrients, list of raw data files, description of quality flags and comments on data." "See excel file 9611nuts.xls for data, methods, depth profiles, comments etc.; This is the main source file." "Raw data files : 960709.aaz, 960710.aaz, 960711.aaz (.anz, .wk1 and .xls files with same names also); " 9611nuts.mel is the data file (excel file v5) as provided by the contractor. Samples were frozen onboard ship using a quick freezer and stored in a -20 deg C freezer until analysis at IOS Comments from secondary file: d:\geostr\9611\iosshell\96110042.dw2 *CALIBRATION !--1--- -2-- ---3--- ---4--- --5-- --6-- --7-- --8--- ---9---- ---10--- --11- !Pressu Samp Salinit Oxygen: Oxyge Nitra Silic Phosph Temperat Salinity Trans !re le_ y: Dissolv n: te_ ate ate ure missi ! Numb Bottle ed Disso plus_ vity ! er lved Nitri ! te !------ ---- ------- ------- ----- ----- ----- ------ -------- -------- ----- *END OF HEADER 0.0 191 21.121 6.989 307.4 5.0 28.7 0.60 12.8842 22.6777 17.7 10.8 190 28.308 4.983 217.8 18.5 35.1 1.87 11.2253 27.5976 12.0 20.9 189 28.820 5.802 253.5 24.7 43.3 2.20 9.4760 28.7724 54.4 30.3 188 29.053 4.312 188.4 26.4 47.4 2.31 9.2282 28.9991 66.5 50.2 187 29.312 4.174 182.3 27.8 50.1 2.29 8.8696 29.3442 67.1 75.2 186 29.701 4.373 190.9 26.0 43.5 2.19 8.9920 29.6859 67.4 101.0 185 30.108 4.379 191.1 22.6 39.1 2.01 9.4499 30.0381 59.2 121.3 184 30.561 4.151 181.1 23.8 40.6 2.18 9.1491 30.5707 25.1