*2013/12/16 15:10:08.01 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1996/06/19 01:01:00.000 NUMBER OF RECORDS : 13 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Down FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 10 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 274.4 2 Sample_Number n/a 94 106 3 Oxygen:Dissolved mL/L 2.943 7.314 4 Oxygen:Dissolved umol/kg 128.4 321.2 5 Nitrate_plus_Nitrite umol/L -0.2 28.8 6 Silicate umol/L 5.5 59.2 7 Phosphate umol/L 0.9E-01 2.6 8 Temperature 'deg C (IPTS68)' 8.5598 15.4006 9 Salinity PSS-78 23.5183 30.8709 10 Transmissivity %/metre 43.90335 72.26427 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 5 I I 0 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 7 F ' ' 2 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 9 F REAL*4 4 10 -99 ' ' 6 F ' ' 1 $END $REMARKS Raw data in file 96110025 VI03 = 10.02 ! Volume of iodate standard (cm**3) NI03 = .01012923 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) UFLAG = -1 ! 0|-1, -1 indicates DO_mass is valid Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ File name : 96110024.ACQ Comments from secondary file: c:\data_D\temp\9611\96110025.chm -------------------------------------------------------------- Raw data in file 96110025 VI03 = 10.02 ! Volume of iodate standard (cm**3) NI03 = .01012923 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) UFLAG = -1 ! 0|-1, -1 indicates DO_mass is valid Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ File name : 96110024.ACQ $END *ADMINISTRATION MISSION : 1996-11 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Strait of Georgia SCIENTIST : Juhasz T. PLATFORM : Vector CONTACT : Mary O'Brien ! custom item *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : NI04 EVENT NUMBER : 25 LATITUDE : 49 17.89000 N ! (deg min) LONGITUDE : 123 42.28000 W ! (deg min) WATER DEPTH : 290 $REMARKS Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ Station Latitude : 49 17.80 N Longitude : 123 42.30 W Depth : 280 Comments from secondary file: c:\data_D\temp\9611\96110025.chm -------------------------------------------------------------- Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ Station Latitude : 49 17.80 N Longitude : 123 42.30 W Depth : 280 $END *INSTRUMENT TYPE : Bottle MODEL : Niskin 10 litre $REMARKS Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman Dosimat (model 665) and a PC 900 Colorimeter. Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC4 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- AutoOxy.bas 1.8 1996/06/19 05:31:58 ' ' 13 OxyRedo.bas 1.0 1996/07/12 09:21:35 13 13 SORT 2.3 1996/08/06 16:04:59 13 13 CLEAN 2.0 1996/08/07 11:51:08 13 13 SORT 2.3 1997/03/13 12:44:57 13 13 MERGE 1.0 1997/03/13 13:00:15 13 13 REVERSE 1.1 1998/08/21 15:59:08 ? ? CLEAN 2.6 1998/08/21 16:10:36 13 13 REMOVECH 3.1 1998/08/24 09:56:57 13 13 MERGE 2.2 1998/08/24 10:07:25 13 13 MERGE 2.2 1998/08/24 10:43:47 13 13 HDREDIT2 1.0 1998/08/24 10:59:50 ? ? REMOVECH 3.1 1998/08/31 14:14:07 13 13 HDREDIT2 1.0 1998/08/31 14:32:13 ? ? MERGE 2.3 1999/11/18 14:59:01 13 13 REMOVECH 6.0 2003/09/24 13:21:30 13 13 HDREDIT2 1.7 2003/09/24 13:24:13 ? ? CLEAN 4.4 2003/09/24 13:24:50 13 13 CALIB 11.4 2004/06/02 09:19:30 13 13 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:10:08 13 13 $END $REMARKS C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' OxyRedo fixs DO_mass and DO_volumne when incorrect values for VIO3, NIO3, blank, or standard have been entered. -The following SORT parameters were used. Sorted by channel: PRESSURE Pressure channel sorted according to values in sort channel -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following SORT parameters were used. Sorted by channel: consecutive_no Pressure channel sorted according to values in sort channel Sort in Ascending Order -The following MERGE parameters were used: Primary File Extension: h1 Secondary File Extension: nut Merge Channel: Consecutive_no Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Pressure,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:v Secondary Channels to Include: Consecutive_no,Nitrate_plus_nitrite,Silicate,Orthophosphate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. SALINITY:BOTTLE -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrate_plus_nitrite,S Secondary Channels to Include: Salinity:bottle Primary file : d:\geostr\9611\iosshell\96110025.rem Secondary file: d:\geostr\9611\iosshell\96110025.ios -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrat Secondary Channels to Include: Temperature,Salinity:ctd,Transmissivity Primary file : d:\geostr\9611\iosshell\96110025.mg2 Secondary file: d:\geostr\9611\iosshell\96110025.dw2 Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = .0 Calibration file = C:\IOSSHELL\CALFILES\guild.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 500.00 .10000 999.000 3.00 Temp 55 5 .00 30.00 .00500 999.000 3.00 Cond 55 5 .00 1.00 .00010 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): .0000 Sample period (sec): .0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .50 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. Transmissivity -The following MERGE parameters were used: Merge Channel: pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, consecutive_no, Salinity:Bottle, Dissolved_Oxygen:vol, Dissolved_Oxygen:mas, nitrate_plus_nitrite, silicate, orthophosphate, Temperature, Salinity:ctd Secondary Channels to Include: Transmissivity Primary file : c:\data_D\temp\9611\96110025.che Secondary file: c:\data_D\temp\9611\96110025.chm Comments from secondary file: c:\data_D\temp\9611\96110025.chm -------------------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' OxyRedo fixs DO_mass and DO_volumne when incorrect values for VIO3, NIO3, blank, or standard have been entered. -The following SORT parameters were used. Sorted by channel: PRESSURE Pressure channel sorted according to values in sort channel -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following SORT parameters were used. Sorted by channel: consecutive_no Pressure channel sorted according to values in sort channel Sort in Ascending Order -The following MERGE parameters were used: Primary File Extension: h1 Secondary File Extension: nut Merge Channel: Consecutive_no Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Pressure,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:v Secondary Channels to Include: Consecutive_no,Nitrate_plus_nitrite,Silicate,Orthophosphate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. SALINITY:BOTTLE -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrate_plus_nitrite,S Secondary Channels to Include: Salinity:bottle Primary file : d:\geostr\9611\iosshell\96110025.rem Secondary file: d:\geostr\9611\iosshell\96110025.ios -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrat Secondary Channels to Include: Temperature,Salinity:ctd,Transmissivity Primary file : d:\geostr\9611\iosshell\96110025.mg2 -The following CHANNEL(S) were removed from file. CLEAN functions: - Reset #RECS, MIN & MAX values in header. -The following CALIB parameters were used: $END *COMMENTS Comments from secondary file: D:\CRUISES\GS9697\9611\iosshell\96110025.nut -------------------------------------------------------------------------- Information on nutrient data : "See file 9611nuts.csv for nutrient data including averages, replicates and quality flags." "See file 9611nuts.txt for description of methods used to analyze nutrients, list of raw data files, description of quality flags and comments on data." "See excel file 9611nuts.xls for data, methods, depth profiles, comments etc.; This is the main source file." "Raw data files : 960709.aaz, 960710.aaz, 960711.aaz (.anz, .wk1 and .xls files with same names also); " 9611nuts.mel is the data file (excel file v5) as provided by the contractor. Samples were frozen onboard ship using a quick freezer and stored in a -20 deg C freezer until analysis at IOS Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ \ Alt S start position 49 17.75 N 123 42.33 W 00:54:51 06-19-1996 Alt S stop position 49 17.89 N 123 42.28 W 01:01:15 06-19-1996 Comments from secondary file: c:\data_D\temp\9611\96110025.chm -------------------------------------------------------------- Comments from secondary file: D:\CRUISES\GS9697\9611\iosshell\96110025.nut -------------------------------------------------------------------------- Information on nutrient data : "See file 9611nuts.csv for nutrient data including averages, replicates and quality flags." "See file 9611nuts.txt for description of methods used to analyze nutrients, list of raw data files, description of quality flags and comments on data." "See excel file 9611nuts.xls for data, methods, depth profiles, comments etc.; This is the main source file." "Raw data files : 960709.aaz, 960710.aaz, 960711.aaz (.anz, .wk1 and .xls files with same names also); " 9611nuts.mel is the data file (excel file v5) as provided by the contractor. Samples were frozen onboard ship using a quick freezer and stored in a -20 deg C freezer until analysis at IOS Comments from secondary file: d:\geostr\9611\iosshell\96110025.dw2 ------------------------------------------------------------------ *CALIBRATION !--1--- -2-- ---3--- --4-- --5-- --6-- --7--- ---8---- ---9---- --10- !Pressu Samp Oxygen: Oxyge Nitra Silic Phosph Temperat Salinity Trans !re le_ Dissolv n: te_ ate ate ure missi ! Numb ed Disso plus_ vity ! er lved Nitri ! te !------ ---- ------- ----- ----- ----- ------ -------- -------- ----- *END OF HEADER 0.0 106 7.314 321.2 -0.2 5.5 0.09 15.4006 23.5183 44.6 10.2 105 6.254 273.7 12.0 25.9 1.42 14.0322 26.0634 44.8 20.5 104 4.543 198.6 23.3 43.6 2.05 10.2449 28.3719 43.9 29.9 103 4.220 184.3 27.6 48.1 2.32 9.2920 28.9841 71.6 50.2 102 4.128 180.3 28.7 50.9 2.32 8.6180 29.4538 72.3 75.3 101 4.203 183.5 28.5 49.0 2.32 8.5598 29.6610 71.3 100.8 100 4.387 191.6 24.9 44.0 2.02 9.1183 29.9739 65.0 125.4 99 4.251 185.6 23.9 41.4 1.79 9.2606 30.2461 52.9 151.1 98 4.115 179.6 25.3 44.1 2.07 9.1216 30.3935 55.5 174.6 97 4.000 174.5 25.9 46.0 2.26 9.0256 30.4699 56.2 200.6 96 3.886 169.6 26.7 48.0 2.17 8.9240 30.5414 61.9 250.3 95 3.086 134.7 28.8 56.8 2.60 9.1041 30.8149 66.2 274.4 94 2.943 128.4 28.7 59.2 2.49 9.1613 30.8709 64.2