*2013/12/16 15:10:07.96 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1996/06/18 21:52:00.000 NUMBER OF RECORDS : 13 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Down FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 10 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.4 300.7 2 Sample_Number n/a 67 79 3 Oxygen:Dissolved mL/L 2.674 7.736 4 Oxygen:Dissolved umol/kg 116.7 339 5 Nitrate_plus_Nitrite umol/L 0.1 29.3 6 Silicate umol/L 5.2 61.4 7 Phosphate umol/L 0.5E-01 2.82 8 Temperature 'deg C (IPTS68)' 8.5385 15.2363 9 Salinity PSS-78 22.2995 30.9077 10 Transmissivity %/metre 40.55194 68.87688 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 5 I I 0 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 7 F ' ' 2 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 9 F REAL*4 4 10 -99 ' ' 6 F ' ' 1 $END $REMARKS Raw data in file 96110021 VI03 = 10.02 ! Volume of iodate standard (cm**3) NI03 = .01012923 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) UFLAG = -1 ! 0|-1, -1 indicates DO_mass is valid Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ File name : 96110020.ACQ Comments from secondary file: c:\data_D\temp\9611\96110021.chm -------------------------------------------------------------- Raw data in file 96110021 VI03 = 10.02 ! Volume of iodate standard (cm**3) NI03 = .01012923 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) UFLAG = -1 ! 0|-1, -1 indicates DO_mass is valid Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ File name : 96110020.ACQ $END *ADMINISTRATION MISSION : 1996-11 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Strait of Georgia SCIENTIST : Juhasz T. PLATFORM : Vector CONTACT : Mary O'Brien ! custom item *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : NI02 EVENT NUMBER : 21 LATITUDE : 49 14.73000 N ! (deg min) LONGITUDE : 123 48.76000 W ! (deg min) WATER DEPTH : 340 $REMARKS Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ Station Latitude : 49 14.67 N Longitude : 123 48.68 W Depth : 305 Comments from secondary file: c:\data_D\temp\9611\96110021.chm -------------------------------------------------------------- Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ Station Latitude : 49 14.67 N Longitude : 123 48.68 W Depth : 305 $END *INSTRUMENT TYPE : Bottle MODEL : Niskin 10 litre $REMARKS Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman Dosimat (model 665) and a PC 900 Colorimeter. Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC4 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- AutoOxy.bas 1.8 1996/06/19 02:20:05 ' ' 13 OxyRedo.bas 1.0 1996/07/12 09:20:36 13 13 SORT 2.3 1996/08/06 16:04:58 13 13 CLEAN 2.0 1996/08/07 11:51:07 13 13 SORT 2.3 1997/03/13 12:44:56 13 13 MERGE 1.0 1997/03/13 13:00:14 13 13 REVERSE 1.1 1998/08/21 15:59:07 ? ? CLEAN 2.6 1998/08/21 16:10:36 13 13 REMOVECH 3.1 1998/08/24 09:56:57 13 13 MERGE 2.2 1998/08/24 10:07:24 13 13 MERGE 2.2 1998/08/24 10:43:47 13 13 HDREDIT2 1.0 1998/08/24 10:59:50 ? ? REMOVECH 3.1 1998/08/31 14:14:07 13 13 HDREDIT2 1.0 1998/08/31 14:32:11 ? ? MERGE 2.3 1999/11/18 14:59:01 13 13 REMOVECH 6.0 2003/09/24 13:21:30 13 13 HDREDIT2 1.7 2003/09/24 13:24:13 ? ? CLEAN 4.4 2003/09/24 13:24:50 13 13 CALIB 11.4 2004/06/02 09:19:25 13 13 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:10:07 13 13 $END $REMARKS C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' OxyRedo fixs DO_mass and DO_volumne when incorrect values for VIO3, NIO3, blank, or standard have been entered. -The following SORT parameters were used. Sorted by channel: PRESSURE Pressure channel sorted according to values in sort channel -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following SORT parameters were used. Sorted by channel: consecutive_no Pressure channel sorted according to values in sort channel Sort in Ascending Order -The following MERGE parameters were used: Primary File Extension: h1 Secondary File Extension: nut Merge Channel: Consecutive_no Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Pressure,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:v Secondary Channels to Include: Consecutive_no,Nitrate_plus_nitrite,Silicate,Orthophosphate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. SALINITY:BOTTLE -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrate_plus_nitrite,S Secondary Channels to Include: Salinity:bottle Primary file : d:\geostr\9611\iosshell\96110021.rem Secondary file: d:\geostr\9611\iosshell\96110021.ios -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrat Secondary Channels to Include: Temperature,Salinity:ctd,Transmissivity Primary file : d:\geostr\9611\iosshell\96110021.mg2 Secondary file: d:\geostr\9611\iosshell\96110021.dw2 Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = .0 Calibration file = C:\IOSSHELL\CALFILES\guild.ccf -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pres 55 5 .00 500.00 .10000 999.000 3.00 Temp 55 5 .00 30.00 .00500 999.000 3.00 Cond 55 5 .00 1.00 .00010 999.000 3.00 Tran 55 5 .00 100.00 .10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): .0000 Sample period (sec): .0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 1.00 Minimum Surface Salinity: .000 Surface Swell Pressure Tolerance: .50 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. Sal -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. Transmissivity -The following MERGE parameters were used: Merge Channel: pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, consecutive_no, Salinity:Bottle, Dissolved_Oxygen:vol, Dissolved_Oxygen:mas, nitrate_plus_nitrite, silicate, orthophosphate, Temperature, Salinity:ctd Secondary Channels to Include: Transmissivity Primary file : c:\data_D\temp\9611\96110021.che Secondary file: c:\data_D\temp\9611\96110021.chm Comments from secondary file: c:\data_D\temp\9611\96110021.chm -------------------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' OxyRedo fixs DO_mass and DO_volumne when incorrect values for VIO3, NIO3, blank, or standard have been entered. -The following SORT parameters were used. Sorted by channel: PRESSURE Pressure channel sorted according to values in sort channel -The following CLEAN parameters were used. Reset #RECS, MIN & MAX values in header. -The following SORT parameters were used. Sorted by channel: consecutive_no Pressure channel sorted according to values in sort channel Sort in Ascending Order -The following MERGE parameters were used: Primary File Extension: h1 Secondary File Extension: nut Merge Channel: Consecutive_no Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Pressure,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:v Secondary Channels to Include: Consecutive_no,Nitrate_plus_nitrite,Silicate,Orthophosphate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. -The following CHANNEL(S) were removed from file. SALINITY:BOTTLE -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrate_plus_nitrite,S Secondary Channels to Include: Salinity:bottle Primary file : d:\geostr\9611\iosshell\96110021.rem Secondary file: d:\geostr\9611\iosshell\96110021.ios -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Consecutive_no,Salinity:bottle,Dissolved_oxygen:mas,Dissolved_oxygen:vol,Nitrat Secondary Channels to Include: Temperature,Salinity:ctd,Transmissivity Primary file : d:\geostr\9611\iosshell\96110021.mg2 Secondary file: d:\geostr\9611\iosshell\96110021.dw2 -The following CHANNEL(S) were removed from file. CLEAN functions: -The following CALIB parameters were used: Calibration type = Correct $END *COMMENTS Comments from secondary file: D:\CRUISES\GS9697\9611\iosshell\96110021.nut -------------------------------------------------------------------------- Information on nutrient data : "See file 9611nuts.csv for nutrient data including averages, replicates and quality flags." "See file 9611nuts.txt for description of methods used to analyze nutrients, list of raw data files, description of quality flags and comments on data." "See excel file 9611nuts.xls for data, methods, depth profiles, comments etc.; This is the main source file." "Raw data files : 960709.aaz, 960710.aaz, 960711.aaz (.anz, .wk1 and .xls files with same names also); " 9611nuts.mel is the data file (excel file v5) as provided by the contractor. Samples were frozen onboard ship using a quick freezer and stored in a -20 deg C freezer until analysis at IOS Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ Alt S start position 49 14.68 N 123 48.76 W 21:44:45 06-18-1996 Alt S stop position 49 14.73 N 123 48.77 W 21:52:37 06-18-1996 Comments from secondary file: c:\data_D\temp\9611\96110021.chm -------------------------------------------------------------- Comments from secondary file: D:\CRUISES\GS9697\9611\iosshell\96110021.nut -------------------------------------------------------------------------- Information on nutrient data : "See file 9611nuts.csv for nutrient data including averages, replicates and quality flags." "See file 9611nuts.txt for description of methods used to analyze nutrients, list of raw data files, description of quality flags and comments on data." "See excel file 9611nuts.xls for data, methods, depth profiles, comments etc.; This is the main source file." "Raw data files : 960709.aaz, 960710.aaz, 960711.aaz (.anz, .wk1 and .xls files with same names also); " 9611nuts.mel is the data file (excel file v5) as provided by the contractor. Samples were frozen onboard ship using a quick freezer and stored in a -20 deg C freezer until analysis at IOS Comments from secondary file: d:\geostr\9611\iosshell\96110021.dw2 ------------------------------------------------------------------ *CALIBRATION !--1--- -2-- ---3--- --4-- --5-- --6-- --7--- ---8---- ---9---- --10- !Pressu Samp Oxygen: Oxyge Nitra Silic Phosph Temperat Salinity Trans !re le_ Dissolv n: te_ ate ate ure missi ! Numb ed Disso plus_ vity ! er lved Nitri ! te !------ ---- ------- ----- ----- ----- ------ -------- -------- ----- *END OF HEADER 0.4 79 7.244 318.3 0.1 5.2 0.05 15.2363 22.2995 40.6 10.2 78 7.736 339.0 2.5 7.8 0.45 14.0901 25.4266 49.6 20.7 77 5.004 218.7 17.6 35.7 1.61 10.4918 28.6072 43.7 30.3 76 6.083 265.8 20.9 50.0 1.97 10.1848 29.0231 55.5 50.8 75 4.183 182.7 21.9 50.1 2.20 9.5008 29.2980 64.2 75.4 74 4.106 179.3 28.7 50.1 2.15 8.6492 29.5579 68.9 100.4 73 4.324 188.8 27.3 47.7 2.13 8.5385 29.8319 68.3 126.0 72 4.261 186.0 26.3 45.6 2.20 8.7955 30.0801 65.6 150.2 71 3.945 172.2 26.8 49.0 2.18 8.8898 30.3798 63.6 175.6 70 3.439 150.0 28.3 54.8 2.60 8.9058 30.5425 68.0 200.6 69 3.175 138.5 28.6 56.0 2.69 9.0379 30.6910 66.5 250.7 68 2.773 121.0 29.1 59.7 2.79 9.2545 30.8707 65.0 300.7 67 2.674 116.7 29.3 61.4 2.82 9.3013 30.9077 63.3