*2013/12/16 15:09:18.38 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : PDT 1995/08/02 15:27:09.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 7 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 5.8 2 Temperature:Primary 'deg C (IPTS68)' 5.5294 5.5331 3 Salinity:T0:C0 PSS-78 27.3213 27.3442 4 Number_of_bin_records n/a 5 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: W:\ctd\9533\convert\95330018.cnv $END *ADMINISTRATION MISSION : 1995-33 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Arctic Ocean Section 1995 SCIENTIST : Cartwright D. PLATFORM : Ivik *LOCATION GEOGRAPHIC AREA : Arctic Archipelago STATION : DP9 EVENT NUMBER : 18 LATITUDE : 68 36.25100 N ! (deg min) LONGITUDE : 113 23.12000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE -19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.021 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.1 1998/06/29 15:50:01 319 319 DERIVEDQ 2.2 1998/07/03 13:03:16 319 319 REMOVECH 3.0 1998/07/03 13:09:45 319 319 SHIFTDAT 2.3 1998/07/03 13:15:44 319 319 EXPFILT 1.0 1998/07/03 13:20:32 319 319 DELETE 4.4 1998/07/03 13:22:36 319 47 BINAVE2 1.0 1998/07/03 13:37:41 47 7 REMOVECH 3.0 1998/07/07 14:58:19 7 7 REMOVECH 6.0 2003/09/08 16:32:35 7 7 HDREDIT2 1.6 2003/09/08 16:38:58 ? ? CLEAN 4.4 2003/09/08 16:39:20 7 7 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:09:18 7 7 $END $REMARKS -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature:Primary Reference channel for conductivity ratio is: Conductivity_ratio Reference channel for salinity is: Salinity:T0:C0 Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Conductivity_ratio Insitu Insitu YES -The following CHANNEL(S) were removed from file. Conductivity:Primary -The following SHIFT parameters were used. Shift Channel: temp # of Records to Advance (-ve for Delay): At REC# 0 Shift= 1.00 Salinity was recalculated after shift -The following EXPFILT parameters were used: Channels to Filter: Cond Salinity WILL be Recalculated after Filtering Sampling Interval: .500 Filter Time Response: .500 Calculated Filter Coeff a= .582 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 10.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following BINAVE2 parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = .000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity_Ratio Scan_Number flag -The following CHANNEL(S) were removed from file. Descent_Rate CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = ar951017.HEX Software Version 4.021 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Aug 02 1995 18:47:24 Ship: Cruise: Station: DP9 Latitude: 68 36.251 N Longitude: 113 23.120 W ds SEACAT PROFILER V3.0 SN 1030 08/02/95 17:21:44.198 strain gauge pressure sensor: S/N = 154898, range = 300 psia, tc = 489 clk = 32768.180 iop = 150 vmain = 7.6 vlith = 5.7 mode = PROFILE ncasts = 18 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 3100 hertz pump delay = 45 seconds samples = 16762 free = 69983 lwait = 0 msec SW1 = 80 battery cutoff = 5.8 volts number of voltages sampled = 0 logdata = NO S> cast 17 08/02 15:27:09 samples 16443 to 16761 sample rate = 1 scan every 0 .5 seconds stop = switch off # nquan = 7 # nvalues = 319 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t068: temperature, IPTS-68 [deg C] # name 3 = c0S/m: conductivity [S/m] # name 4 = dz/dt: descent rate [m/s] # name 5 = sal00: salinity, PSS-78 [PSU] # name 6 = flag: 0.000e+00 # span 0 = 1, 319 # span 1 = -0.630, 6.052 # span 2 = 5.5283, 6.5804 # span 3 = 0.021975, 2.743891 # span 4 = -0.510, 0.429 # span 5 = 0.1627, 27.6261 # span 6 = 0.000e+00, 0.000e+00 # interval = seconds: 0.5 # start_time = Aug 02 1995 15:27:09 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, June 7, 1996 # sensor 1 = Frequency 1 conductivity, 1030, June 7, 1996, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 154898, June 14, 1996 # datcnv_date = Jun 26 1998 16:38:08, 4.229 # datcnv_in = 95330018.HEX 95331030.CON # datcnv_skipover = 0 # derive_date = Jun 29 1998 15:46:03, 4.229 # derive_in = 95330018.CNV 95331030.CON # file_type = ascii END* Because there are so few records DELETE did not remove negative pressures. Editing manually the surface pressure was changed from -0.144 to 0.0 and the surface temp and salinity were edited (2 points). !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.0 5.5314 27.3425 9 0.9 5.5314 27.3425 10 2.0 5.5314 27.3425 5 3.0 5.5294 27.3401 6 4.0 5.5316 27.3307 5 4.9 5.5331 27.3442 6 5.8 5.5301 27.3213 6