*2017/03/30 14:12:16.14 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *COMMENTS down Alt S start position 49 20.56 N 126 35.10 W 12:03:56 10-03-1995 Alt S stop position 49 20.50 N 126 35.07 W 12:06:18 10-03-1995 *FILE START TIME : UTC 1995/10/03 12:03:56.510 END TIME : UTC 1995/10/03 12:06:18.050 NUMBER OF RECORDS : 40 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.4 42.6 2 Temperature 'deg C (IPTS68)' 10.679 14.9517 3 Transmissivity %/metre 30 51.1 4 Salinity PSS-78 31.849 32.0256 5 Number_of_bin_records n/a 3 32 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95300147.ACQ $END *ADMINISTRATION MISSION : 1995-30 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, JGOFS SCIENTIST : Denman K.L. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Laperouse, WCVI STATION : LG01 EVENT NUMBER : 147 LATITUDE : 49 20.56000 N ! (deg min) LONGITUDE : 126 35.10000 W ! (deg min) LATITUDE 2 : 49 20.50000 N ! (deg min) LONGITUDE 2 : 126 35.07000 W ! (deg min) WATER DEPTH : 55 $REMARKS Station Latitude : 49 20.50 N Longitude : 126 35.00 W Depth : 55 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.42 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/10/03 12:03:56.510 END TIME : UTC 1995/10/03 12:06:18.050 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 5498 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05 0.288885E-16) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 ' ' (Pressure) (0.1805097E-01 -0.51919E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1996/02/10 16:33:27 5498 2701 CALIB 6.4 1996/02/11 13:45:21 2701 2701 DESPIKE 1.4 1996/02/25 14:47:43 2701 2701 TIMECOMP 2.2 1996/02/25 14:57:55 2701 2701 DELETE 4.3 1996/02/25 15:11:26 2701 772 DESPIKE 1.4 1996/02/25 15:25:41 772 772 BOXCAR 2.3 1996/02/25 15:33:38 772 772 BINAVE 1.3 1996/02/28 19:37:43 772 40 CALIB 7.0 1996/02/28 20:05:45 40 40 REMOVECH 2.0 1996/02/28 20:15:10 40 40 HEADEDIT 1.1 1996/02/28 20:24:09 ' ' ' ' HDREDIT2 1.7 2003/09/16 14:18:06 ? ? CLEAN 4.4 2003/09/16 14:19:36 40 40 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:09:16 40 40 HDREDIT2 3.1.1 2017/03/30 14:12:16 ? ? $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 9530RAW.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 3500.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 20.00 0.00500 999.000 3.00 CONDUCTIVITY_RATIO 55 5 0.60 1.00 0.00010 999.000 3.00 Transmissivity 55 5 0.00 85.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.50m/s (calculated over 11 points) will be deleted Sample interval = 0.05 seconds. -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Salinity 21 3 0.00 35.00 0.01000 999.000 2.50 -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9530COR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO TEMPERATURE:THERMISTOR1 TEMPERATURE:THERMISTOR2 SIGMA-T CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. -HEADER EDITS: 2017/03/30 14:12:16 - none. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 0.4 14.9344 30.0 31.8493 11 1.1 14.9360 40.2 31.8490 7 2.1 14.9499 34.7 31.8497 14 3.1 14.9517 32.0 31.8507 22 4.0 14.9455 38.3 31.8518 21 5.2 14.9440 39.8 31.8526 19 6.0 14.9409 40.5 31.8522 29 7.0 14.9396 40.9 31.8515 32 7.9 14.9407 41.4 31.8510 15 9.0 14.9356 41.9 31.8513 18 10.0 14.9360 41.6 31.8509 16 11.0 14.9289 41.5 31.8500 24 14.0 14.8815 42.1 31.8490 21 15.0 14.8414 41.8 31.8598 22 15.9 14.7730 42.3 31.8903 21 17.1 14.5542 43.7 31.9099 17 18.0 14.2326 43.1 31.8976 21 18.8 14.0544 42.5 31.8940 22 20.0 13.8855 43.1 31.9018 25 20.7 13.7533 43.5 31.9027 15 22.2 13.7042 44.2 31.9045 8 23.0 13.6898 44.3 31.9069 25 24.0 13.6763 44.8 31.9100 17 25.0 13.6473 45.3 31.9161 18 26.0 13.6101 45.7 31.9200 21 27.0 13.5740 46.4 31.9195 22 28.0 13.5139 47.0 31.9295 20 29.0 13.4160 46.7 31.9394 21 29.9 13.2899 47.0 31.9474 23 32.0 13.1506 44.1 31.9531 20 33.0 13.0963 43.9 31.9583 18 34.0 13.0703 43.6 31.9607 22 36.2 12.9746 43.9 31.9688 3 37.0 12.7340 43.7 31.9919 26 38.0 12.4064 44.0 32.0036 25 38.9 11.9325 46.1 32.0256 22 40.3 11.2263 50.9 31.9477 12 41.0 10.9683 51.1 31.9440 28 42.0 10.8348 48.8 31.9402 19 42.6 10.6790 50.0 31.9715 10