*2017/03/30 14:12:15.60 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *COMMENTS THIRD CAST FOR WATER, TO 40 M Alt S start position 49 6.51 N 127 44.12 W 23:07:05 10-02-1995 Alt S stop position 49 6.48 N 127 44.13 W 23:09:30 10-02-1995 *FILE START TIME : UTC 1995/10/02 23:07:05.300 END TIME : UTC 1995/10/02 23:09:30.360 NUMBER OF RECORDS : 43 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.3 43.5 2 Temperature 'deg C (IPTS68)' 9.7539 15.901 3 Transmissivity %/metre 41.5 52.2 4 Salinity PSS-78 31.9407 32.5462 5 Number_of_bin_records n/a 1 36 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95300132.ACQ $END *ADMINISTRATION MISSION : 1995-30 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, JGOFS SCIENTIST : Denman K.L. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Laperouse, WCVI STATION : SEDO EVENT NUMBER : 132 LATITUDE : 49 6.50000 N ! (deg min) LONGITUDE : 127 44.09000 W ! (deg min) LATITUDE 2 : 49 6.48000 N ! (deg min) LONGITUDE 2 : 127 44.13000 W ! (deg min) WATER DEPTH : 2500 $REMARKS Station Latitude : 49 7.53 N Longitude : 127 44.13 W Depth : 2500 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.42 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/10/02 23:07:05.300 END TIME : UTC 1995/10/02 23:09:30.360 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 4225 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05 0.288885E-16) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 ' ' (Pressure) (0.1805097E-01 -0.51919E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 1996/02/10 16:25:26 4225 2094 CALIB 6.4 1996/02/11 13:40:41 2094 2094 DESPIKE 1.4 1996/02/25 14:45:50 2094 2094 TIMECOMP 2.2 1996/02/25 14:56:35 2094 2094 DELETE 4.3 1996/02/25 15:09:49 2094 895 DESPIKE 1.4 1996/02/25 15:24:02 895 895 BOXCAR 2.3 1996/02/25 15:32:28 895 895 DERIVEDQ 2.0 1996/02/25 15:43:48 895 895 CTDEDIT 3.2 1996/02/26 19:40:24 895 895 BINAVE 1.3 1996/02/28 19:36:59 895 43 CALIB 7.0 1996/02/28 20:05:34 43 43 REMOVECH 2.0 1996/02/28 20:15:03 43 43 HEADEDIT 1.1 1996/02/28 20:24:01 ' ' ' ' HDREDIT2 1.7 2003/09/16 14:18:03 ? ? CLEAN 4.4 2003/09/16 14:19:34 43 43 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:09:15 43 43 HDREDIT2 3.1.1 2017/03/30 14:12:15 ? ? $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 9530RAW.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 3500.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 20.00 0.00500 999.000 3.00 CONDUCTIVITY_RATIO 55 5 0.60 1.00 0.00010 999.000 3.00 Transmissivity 55 5 0.00 85.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.50m/s (calculated over 11 points) will be deleted Sample interval = 0.05 seconds. -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Salinity 21 3 0.00 35.00 0.01000 999.000 2.50 -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Sigma-t 0.0 Insitu YES -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9530COR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO TEMPERATURE:THERMISTOR1 TEMPERATURE:THERMISTOR2 SIGMA-T CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. -HEADER EDITS: 2017/03/30 14:12:15 - none. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 1.3 15.9010 43.5 31.9407 1 1.8 15.8979 42.2 31.9422 5 3.0 15.8976 41.5 31.9434 25 4.0 15.8905 45.2 31.9459 28 5.3 15.8928 46.4 31.9447 9 6.0 15.8933 46.4 31.9446 23 7.0 15.8922 46.5 31.9450 25 8.0 15.8948 46.5 31.9449 13 9.0 15.8849 46.5 31.9476 12 10.0 15.8738 46.6 31.9470 17 11.0 15.8755 46.5 31.9466 26 13.0 15.8690 46.8 31.9481 24 14.0 15.8682 46.8 31.9486 28 14.9 15.8640 46.8 31.9500 25 16.0 15.8628 46.8 31.9497 24 17.0 15.8629 46.9 31.9500 23 18.0 15.8615 46.9 31.9507 25 19.0 15.8608 46.9 31.9523 28 20.0 15.8428 47.1 31.9605 36 20.8 15.8392 47.2 31.9597 17 22.4 15.7405 47.4 31.9813 6 23.0 15.6698 47.3 31.9997 23 24.0 15.2106 46.6 32.0738 23 25.0 14.3862 44.6 32.1909 21 26.0 13.7414 44.1 32.3571 21 27.0 13.1310 45.0 32.4399 21 28.0 12.2445 47.0 32.3244 22 29.0 11.9705 48.0 32.2577 20 30.0 11.9200 48.2 32.2555 19 31.0 11.7701 48.5 32.2737 20 32.0 11.5811 49.1 32.2970 23 32.9 11.3926 49.8 32.3078 26 34.1 11.2055 50.4 32.3112 20 35.0 11.0058 50.8 32.3365 20 36.0 10.7859 51.3 32.3509 22 37.0 10.7124 51.4 32.3672 30 38.0 10.5774 51.5 32.3830 32 39.0 10.4190 51.7 32.3880 24 40.0 10.3923 51.8 32.3880 25 40.9 10.2844 51.9 32.4016 13 42.0 10.1279 52.1 32.4050 22 42.9 10.0109 52.2 32.4552 27 43.5 9.7539 52.2 32.5462 1