*2013/12/16 15:08:44.14 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Woodward/Jeong - winds light - sea calm. Alt S start position 50 54.89 N 128 7.33 W 02:23:02 08-18-1995 Alt S stop position 50 54.86 N 128 7.36 W 02:25:30 08-18-1995 *FILE START TIME : UTC 1995/08/18 02:23:01.440 END TIME : UTC 1995/08/18 02:25:30.960 NUMBER OF RECORDS : 29 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.2 28.9 2 Temperature 'deg C (IPTS68)' 9.7518 13.8815 3 Salinity PSS-78 31.0847 32.4373 4 Number_of_bin_records n/a 1 34 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 5 I I 0 $END $REMARKS File name : 95240175.ACQ $END *ADMINISTRATION MISSION : 1995-24 AGENCY : IOS, Tides & Currents, Sidney, B.C. COUNTRY : Canada PROJECT : PERD SCIENTIST : Woodward M. PLATFORM : Narwhal *LOCATION GEOGRAPHIC AREA : Queen Charlotte Sound STATION : GG04 EVENT NUMBER : 175 LATITUDE : 50 54.89000 N ! (deg min) LONGITUDE : 128 7.33000 W ! (deg min) LATITUDE 2 : 50 54.86000 N ! (deg min) LONGITUDE 2 : 128 7.36000 W ! (deg min) WATER DEPTH : 32 $REMARKS Station Latitude : 50 55.00 N Longitude : 38 7.10 W Depth : 30 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 8755 SERIAL NUMBER : 50254 $REMARKS Acquisition program : CTD.EXE version 1.38 CTD data type : 2 ! 8755 system binary frame Control String : KP6000TC $END *RAW START TIME : UTC 1995/08/18 02:23:01.440 END TIME : UTC 1995/08/18 02:25:30.960 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1151 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 (2 6000) Temperature 'DEG C (ITS68)' 10 -99 (0.10309E-02 1.0005) Conductivity_Ratio n/a 10 -99 (-0.1002E-02 1.0014) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.945E-02 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.0 1995/09/30 18:01:18 1151 1151 CALIB 6.1 1995/10/01 12:49:27 1151 1151 DESPIKE 1.4 1995/11/05 10:45:00 1151 1151 TIMECOMP 2.2 1995/11/05 11:19:07 1151 1151 DELETE 4.3 1995/11/05 11:35:26 1151 812 BOXCAR 2.3 1995/11/05 13:08:12 812 812 BINAVE 1.3 1995/11/05 13:17:19 812 29 CALIB 6.3 1995/11/12 15:18:27 29 29 REMOVECH 2.0 1995/11/12 15:27:44 29 29 HEADEDIT 1.1 1995/11/12 15:35:18 ' ' ' ' HDREDIT2 1.6 2003/09/08 14:55:41 ? ? CLEAN 4.4 2003/09/08 14:55:59 29 29 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:44 29 29 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = 0.0 Calibration file = PARM$PATH:GUILD.CAL -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 2000.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 16.00 0.00500 999.000 3.00 CONDUCTIVITY 55 5 0.00 1.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 29.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.35m/s (calculated over 21 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9524CORR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 13.8815 31.0847 1 2.0 13.8800 31.0852 33 3.0 13.8791 31.0854 29 4.0 13.8190 31.0868 30 5.0 13.5033 31.0861 31 6.0 12.5719 31.3198 32 7.0 12.1837 31.4990 30 8.0 11.7168 31.7752 31 9.0 11.5786 31.8804 32 10.0 11.1659 32.0316 28 11.0 10.8890 32.1103 26 12.0 10.6956 32.1628 31 13.0 10.5116 32.1912 28 14.0 10.2866 32.2743 34 15.0 10.1331 32.3158 26 16.0 10.0744 32.3274 26 17.0 10.0494 32.3312 28 18.0 9.9713 32.3520 27 19.0 9.9309 32.3773 31 20.0 9.8825 32.3997 27 21.0 9.8476 32.3926 27 22.0 9.8178 32.3992 23 23.0 9.7984 32.4075 26 24.0 9.7976 32.4002 30 25.0 9.8042 32.3996 31 26.0 9.8019 32.4163 26 27.0 9.7777 32.4146 25 28.0 9.7518 32.4214 31 28.9 9.7567 32.4373 32