*2013/12/16 15:08:38.40 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Dorosh & Sutherland, wind 18knots 190 deg Alt S start position 51 40.39 N 128 36.47 W 03:35:23 08-09-1995 Alt S stop position 51 40.42 N 128 36.47 W 03:38:28 08-09-1995 *FILE START TIME : UTC 1995/08/09 03:35:22.260 END TIME : UTC 1995/08/09 03:38:28.690 NUMBER OF RECORDS : 33 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.1 32.7 2 Temperature 'deg C (IPTS68)' 9.8566 13.8404 3 Salinity PSS-78 31.605 32.3459 4 Number_of_bin_records n/a 10 54 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 5 I I 0 $END $REMARKS File name : 95240034.ACQ $END *ADMINISTRATION MISSION : 1995-24 AGENCY : IOS, Tides & Currents, Sidney, B.C. COUNTRY : Canada PROJECT : PERD SCIENTIST : Woodward M. PLATFORM : Narwhal *LOCATION GEOGRAPHIC AREA : Queen Charlotte Sound STATION : GI03 EVENT NUMBER : 34 LATITUDE : 51 40.39000 N ! (deg min) LONGITUDE : 128 36.48000 W ! (deg min) LATITUDE 2 : 51 40.42000 N ! (deg min) LONGITUDE 2 : 128 36.47000 W ! (deg min) WATER DEPTH : 38 $REMARKS Station Latitude : 51 40.30 N Longitude : 38 36.40 W Depth : 40 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 8755 SERIAL NUMBER : 50254 $REMARKS Acquisition program : CTD.EXE version 1.38 CTD data type : 2 ! 8755 system binary frame Control String : KP6000TC $END *RAW START TIME : UTC 1995/08/09 03:35:22.260 END TIME : UTC 1995/08/09 03:38:28.690 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1783 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 (1 6000) Temperature 'DEG C (ITS68)' 10 -99 (0.10309E-02 1.0005) Conductivity_Ratio n/a 10 -99 (-0.1002E-02 1.0014) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.945E-02 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.0 1995/09/30 10:30:22 1783 1783 CALIB 6.1 1995/10/01 12:39:01 1783 1783 DESPIKE 1.4 1995/11/05 10:35:00 1783 1783 TIMECOMP 2.2 1995/11/05 11:11:18 1783 1783 DELETE 4.3 1995/11/05 11:26:45 1783 1200 BOXCAR 2.3 1995/11/05 13:00:37 1200 1200 BINAVE 1.3 1995/11/05 13:10:49 1200 33 CALIB 6.3 1995/11/12 15:17:01 33 33 REMOVECH 2.0 1995/11/12 15:26:43 33 33 HEADEDIT 1.1 1995/11/12 15:33:16 ' ' ' ' HDREDIT2 1.6 2003/09/08 14:55:27 ? ? CLEAN 4.4 2003/09/08 14:55:45 33 33 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:38 33 33 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = 0.0 Calibration file = PARM$PATH:GUILD.CAL -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 2000.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 16.00 0.00500 999.000 3.00 CONDUCTIVITY 55 5 0.00 1.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 29.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.35m/s (calculated over 21 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9524CORR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.1 13.8382 31.6168 25 2.0 13.8379 31.6166 45 3.0 13.8401 31.6162 40 4.0 13.8404 31.6159 40 5.0 13.8371 31.6167 44 6.0 13.8339 31.6174 46 7.0 13.8339 31.6171 32 8.0 13.8296 31.6172 38 9.0 13.8206 31.6176 43 9.9 13.7578 31.6234 39 11.0 13.7429 31.6209 32 12.1 13.7011 31.6201 43 13.0 13.3600 31.6050 45 14.0 12.7207 31.6624 30 15.0 11.9551 31.8061 42 16.0 11.4278 31.9443 47 17.0 11.3575 31.9413 33 18.0 11.2304 31.9239 33 19.0 11.1520 31.9349 40 20.0 11.1128 31.9485 46 21.0 11.0939 31.9421 33 22.0 11.0735 31.9434 24 23.0 11.0288 31.9692 32 24.0 10.9649 31.9918 53 25.1 10.8650 32.0125 39 26.0 10.7928 32.0313 40 27.1 10.7354 32.0381 45 28.0 10.3895 32.2687 23 29.4 10.0151 32.3203 10 30.0 9.9834 32.3363 54 30.7 9.9252 32.3347 23 32.2 9.8699 32.3390 22 32.7 9.8566 32.3459 19