*2013/12/16 15:08:37.29 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Woodward/Jeong - Wind caln, low NW swell Alt S start position 51 4.96 N 128 46.34 W 14:15:16 08-06-1995 Alt S stop position 51 4.93 N 128 46.25 W 14:19:37 08-06-1995 Removed salinity as conductivity cell was bad. *FILE START TIME : UTC 1995/08/06 14:15:15.290 END TIME : UTC 1995/08/06 14:19:37.010 NUMBER OF RECORDS : 61 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.9 61.6 2 Temperature 'deg C (IPTS68)' 8.3518 14.2324 3 Number_of_bin_records n/a 11 49 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 5 I I 0 $END $REMARKS File name : 95240003.ACQ $END *ADMINISTRATION MISSION : 1995-24 AGENCY : IOS, Tides & Currents, Sidney, B.C. COUNTRY : Canada PROJECT : PERD SCIENTIST : Woodward M. PLATFORM : Narwhal *LOCATION GEOGRAPHIC AREA : Queen Charlotte Sound STATION : C015 EVENT NUMBER : 3 LATITUDE : 51 4.96000 N ! (deg min) LONGITUDE : 128 46.34000 W ! (deg min) LATITUDE 2 : 51 4.93000 N ! (deg min) LONGITUDE 2 : 128 46.25000 W ! (deg min) WATER DEPTH : 66 $REMARKS Station Latitude : 51 5.00 N Longitude : 38 46.30 W Depth : 66 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 8755 SERIAL NUMBER : 43827 $REMARKS Acquisition program : CTD.EXE version 1.38 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1995/08/06 14:15:15.290 END TIME : UTC 1995/08/06 14:19:37.010 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 2041 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 (6 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.1603E-02 0.99967) Conductivity_Ratio n/a 10 -99 (-0.889E-03 1.0005) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.945E-02 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.0 1995/09/30 10:19:58 2041 2041 CALIB 6.1 1995/10/01 12:37:13 2041 2041 DESPIKE 1.4 1995/11/05 10:33:06 2041 2041 TIMECOMP 2.2 1995/11/05 11:09:48 2041 2041 DELETE 4.3 1995/11/05 11:25:11 2041 1525 BOXCAR 2.3 1995/11/05 12:59:20 1525 1525 BINAVE 1.3 1995/11/05 13:10:16 1525 61 CALIB 6.3 1995/11/12 15:16:42 61 61 REMOVECH 2.0 1995/11/12 15:30:12 61 61 HEADEDIT 1.1 1995/11/12 15:32:51 ' ' ' ' HDREDIT2 1.6 2003/09/08 14:55:24 ? ? CLEAN 4.4 2003/09/08 14:55:42 61 61 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:37 61 61 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = 0.0 Calibration file = PARM$PATH:GUILD.CAL -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 2000.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 16.00 0.00500 999.000 3.00 CONDUCTIVITY 55 5 0.00 1.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 29.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.35m/s (calculated over 21 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9524CORR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO SALINITY CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- -3-- !Pressu Temperat Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- ---- *END OF HEADER 1.9 14.2324 32 3.0 14.2299 49 3.9 14.2088 34 5.0 14.1351 26 6.0 14.1805 30 7.0 14.1958 30 8.0 14.1026 26 9.0 14.1602 24 10.0 14.1532 26 11.0 13.8133 30 12.0 13.4945 32 13.0 13.1457 33 14.0 12.9885 28 15.0 12.9803 24 16.0 12.8626 22 17.0 12.6794 23 18.0 12.5250 25 19.0 12.1570 28 20.0 11.4876 30 21.0 11.1141 29 22.0 10.9794 30 23.0 10.9561 27 24.0 10.9113 24 25.0 10.9056 24 26.0 10.8692 23 27.0 10.5825 26 28.0 10.3168 27 29.0 10.1498 26 30.0 10.0540 23 31.0 9.9798 24 32.0 9.9346 28 33.0 9.8683 32 34.0 9.7297 27 35.0 9.6983 22 36.0 9.6914 19 37.0 9.6815 20 38.0 9.6700 21 39.0 9.6358 25 40.0 9.5353 27 41.0 9.4633 27 42.0 9.3998 26 43.0 9.3121 24 44.0 9.1738 24 45.0 9.0857 21 46.0 9.0152 21 47.0 8.8574 22 48.0 8.7598 20 49.0 8.7126 18 50.0 8.6119 18 51.0 8.5097 18 52.0 8.4398 19 53.0 8.4347 24 54.0 8.4164 30 55.0 8.3993 31 56.0 8.3856 22 57.0 8.3807 19 58.0 8.3800 18 59.0 8.3775 17 60.0 8.3724 18 61.0 8.3642 21 61.6 8.3518 11