*2013/12/16 15:08:37.26 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Woodward/Jeong - Wind calm, low NW swell Alt S start position 50 57.24 N 128 41.03 W 13:13:43 08-06-1995 Alt S stop position 50 57.36 N 128 40.96 W 13:19:07 08-06-1995 Removed salinity as conductivity cell was bad. *FILE START TIME : UTC 1995/08/06 13:13:42.270 END TIME : UTC 1995/08/06 13:19:07.200 NUMBER OF RECORDS : 76 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3 74.7 2 Temperature 'deg C (IPTS68)' 7.7653 11.0017 3 Number_of_bin_records n/a 16 54 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 5 I I 0 $END $REMARKS File name : 95240002.ACQ $END *ADMINISTRATION MISSION : 1995-24 AGENCY : IOS, Tides & Currents, Sidney, B.C. COUNTRY : Canada PROJECT : PERD SCIENTIST : Woodward M. PLATFORM : Narwhal *LOCATION GEOGRAPHIC AREA : Queen Charlotte Sound STATION : C018 EVENT NUMBER : 2 LATITUDE : 50 57.24000 N ! (deg min) LONGITUDE : 128 41.03000 W ! (deg min) LATITUDE 2 : 50 57.36000 N ! (deg min) LONGITUDE 2 : 128 40.96000 W ! (deg min) WATER DEPTH : 79 $REMARKS Station Latitude : 50 57.30 N Longitude : 38 41.00 W Depth : 79 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 8755 SERIAL NUMBER : 43827 $REMARKS Acquisition program : CTD.EXE version 1.38 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1995/08/06 13:13:42.270 END TIME : UTC 1995/08/06 13:19:07.200 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 2850 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 (6 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.1603E-02 0.99967) Conductivity_Ratio n/a 10 -99 (-0.889E-03 1.0005) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.945E-02 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.0 1995/09/30 10:19:42 2850 2850 CALIB 6.3 1995/11/04 11:18:00 2850 2850 DESPIKE 1.4 1995/11/05 10:33:03 2850 2850 TIMECOMP 2.2 1995/11/05 11:09:46 2850 2850 DELETE 4.3 1995/11/05 11:25:09 2850 2088 BOXCAR 2.3 1995/11/05 12:59:19 2088 2088 BINAVE 1.3 1995/11/05 13:10:15 2088 76 CALIB 6.3 1995/11/12 15:16:41 76 76 REMOVECH 2.0 1995/11/12 15:30:11 76 76 HEADEDIT 1.1 1995/11/12 15:32:51 ' ' ' ' HDREDIT2 1.6 2003/09/08 14:55:24 ? ? CLEAN 4.4 2003/09/08 14:55:42 76 76 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:37 76 76 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = 0.0 Calibration file = PARM$PATH:GUILD.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 2000.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 16.00 0.00500 999.000 3.00 CONDUCTIVITY 55 5 0.00 1.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 29.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.35m/s (calculated over 21 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9524CORR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO SALINITY CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- -3-- !Pressu Temperat Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- ---- *END OF HEADER 0.3 11.0017 23 1.0 10.8638 42 2.0 10.1375 30 3.0 9.7314 41 4.1 9.6856 37 5.0 9.6374 42 6.0 9.5848 30 7.0 9.5562 33 8.1 9.5107 48 9.0 9.4922 25 10.0 9.3967 29 11.0 9.2969 24 12.0 9.2877 28 13.0 9.3166 38 14.0 9.3114 50 15.0 9.4378 39 16.0 9.4296 29 17.0 9.4552 25 18.0 9.3731 28 19.0 9.4973 38 20.0 9.5055 54 21.0 9.6969 39 22.0 9.6793 29 23.0 9.1840 29 24.0 8.9717 39 24.8 8.9022 26 25.9 8.8327 18 27.0 8.7334 17 28.0 8.6164 19 29.0 8.5609 21 30.0 8.5438 36 31.0 8.5184 44 32.0 8.4949 30 33.0 8.4619 23 34.0 8.4304 24 35.0 8.3812 25 36.0 8.3288 26 37.0 8.3172 29 38.0 8.3021 38 39.0 8.2749 38 40.0 8.1989 23 41.0 8.0886 19 42.0 8.0611 16 43.0 8.0568 19 44.1 8.0471 36 44.9 8.0326 32 45.9 8.0040 23 47.0 7.9742 18 48.0 7.9632 16 49.0 7.9569 16 50.0 7.9489 17 51.0 7.9405 18 52.0 7.9283 23 53.0 7.9169 37 53.9 7.9110 44 55.0 7.9068 25 56.0 7.8997 20 57.0 7.8906 19 58.0 7.8657 20 59.0 7.8289 20 60.0 7.7890 19 61.0 7.7813 18 62.0 7.7760 21 63.0 7.7687 24 64.0 7.7678 28 65.0 7.7668 28 66.0 7.7655 24 67.0 7.7653 22 68.0 7.7664 21 69.0 7.7669 20 70.0 7.7667 18 71.0 7.7684 17 72.0 7.7693 16 73.0 7.7683 17 74.1 7.7683 31 74.7 7.7661 20