*2013/12/16 15:08:37.24 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Test at Tofino; bodo & neil Alt S start position 49 7.13 N 125 55.01 W 10:38:18 08-05-1995 Alt S stop position 49 7.13 N 125 55.00 W 10:39:39 08-05-1995 Removed salinity as conductivity cell was bad. *FILE START TIME : UTC 1995/08/05 10:38:17.230 END TIME : UTC 1995/08/05 10:39:39.400 NUMBER OF RECORDS : 10 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 2.1 10.6 2 Temperature 'deg C (IPTS68)' 9.7598 11.258 3 Number_of_bin_records n/a 18 51 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 5 I I 0 $END $REMARKS File name : 95240001.ACQ $END *ADMINISTRATION MISSION : 1995-24 AGENCY : IOS, Tides & Currents, Sidney, B.C. COUNTRY : Canada PROJECT : PERD SCIENTIST : Woodward M. PLATFORM : Narwhal *LOCATION GEOGRAPHIC AREA : Queen Charlotte Sound STATION : NEWS EVENT NUMBER : 1 LATITUDE : 49 7.13000 N ! (deg min) LONGITUDE : 125 55.01000 W ! (deg min) LATITUDE 2 : 49 7.13000 N ! (deg min) LONGITUDE 2 : 125 55.00000 W ! (deg min) WATER DEPTH : 15 $REMARKS Station Latitude : 49 0.00 N Longitude : 33 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 8755 SERIAL NUMBER : 43827 $REMARKS Acquisition program : CTD.EXE version 1.38 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1995/08/05 10:38:17.230 END TIME : UTC 1995/08/05 10:39:39.400 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 650 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure DBAR 10 -99 (3 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.1603E-02 0.99967) Conductivity_Ratio n/a 10 -99 (-0.889E-03 1.0005) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99 () (-0.945E-02 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.0 1995/09/30 10:19:38 650 650 CALIB 6.1 1995/10/01 12:37:09 650 650 DESPIKE 1.4 1995/11/06 10:58:02 650 650 TIMECOMP 2.2 1995/11/06 10:58:41 650 650 DELETE 4.3 1995/11/06 10:59:09 650 363 BOXCAR 2.3 1995/11/06 10:59:53 363 363 BINAVE 1.3 1995/11/06 11:00:25 363 10 CALIB 6.3 1995/11/12 15:16:41 10 10 REMOVECH 2.0 1995/11/12 15:30:11 10 10 HEADEDIT 1.1 1995/11/12 15:32:50 ' ' ' ' HDREDIT2 1.6 2003/09/08 14:55:24 ? ? CLEAN 4.4 2003/09/08 14:55:42 10 10 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:37 10 10 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Pressure offset = 0.0 Calibration file = PARM$PATH:GUILD.CAL -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 190.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 16.00 0.00500 999.000 3.00 CONDUCTIVITY 55 5 0.00 1.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 20.000 Surface Swell Pressure Tolerance: 0.50 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.35m/s (calculated over 21 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9524CORR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO SALINITY CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- -3-- !Pressu Temperat Numb !re ure er_o ! ~bin ! _rec ! ords !------ -------- ---- *END OF HEADER 2.1 11.2580 41 2.9 10.8137 43 3.9 10.7146 37 4.9 10.4261 29 6.0 10.0382 27 7.1 10.0768 51 7.9 9.8940 40 9.0 9.8393 30 10.1 9.7982 47 10.6 9.7598 18