*2013/12/16 15:08:08.70 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS MUN CAST Alt S start position 50 2.61 N 144 53.97 W 15:27:35 09-03-1995 Alt S stop position 50 2.62 N 144 53.94 W 15:28:15 09-03-1995 Collection method: Salinity-Temperature-Pressure data were obtained with a Guildline CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *FILE START TIME : UTC 1995/09/03 15:27:34.130 END TIME : UTC 1995/09/03 15:28:15.830 NUMBER OF RECORDS : 12 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.4 11.6 2 Temperature 'deg C (IPTS68)' 13.1071 13.1156 3 Transmissivity %/metre 39.5 39.6 4 Salinity PSS-78 32.4998 32.5175 5 Number_of_bin_records n/a 2 55 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95120115.ACQ $END *ADMINISTRATION MISSION : 1995-12 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P, WOCE, JGOFS SCIENTIST : Boyd P. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : MP26 EVENT NUMBER : 115 LATITUDE : 50 2.61000 N ! (deg min) LONGITUDE : 144 53.97000 W ! (deg min) LATITUDE 2 : 50 2.62000 N ! (deg min) LONGITUDE 2 : 144 53.94000 W ! (deg min) WATER DEPTH : 4269 $REMARKS Station Latitude : 50 0.00 N Longitude : 55 0.00 W Depth : 4265 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.40 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/09/03 15:27:34.130 END TIME : UTC 1995/09/03 15:28:15.830 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 1430 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure DBAR 10 n/a (0 1 0) Temperature 'DEG C (ITS68)' 10 n/a (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 n/a (-0.519E-03 0.16918E-05 0.288885E-16) Transmissivity '%/25 cm' 10 n/a (0 0.3052E-02) Temperature:thermistor1 n/a 34 n/a (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 n/a 34 n/a (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (PRESSURE TEMPERATURE CONDUCTIVITY_RATIO) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 -99 (Pressure) (0.1632583E-01 -0.3392123E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1996/03/14 15:28:17 1430 688 CALIB 7.0 1996/03/14 16:25:59 688 688 DESPIKE 1.4 1996/03/15 17:38:51 688 688 DESPIKE 1.4 1996/03/18 12:41:38 688 688 TIMECOMP 2.2 1996/03/18 13:02:32 688 688 DELETE 4.3 1996/03/18 14:26:10 688 281 BOXCAR 2.3 1996/03/18 14:47:52 281 281 BINAVE 1.3 1996/03/20 16:59:08 281 12 CALIB 6.4 1996/03/21 16:38:34 12 12 REMOVECH 1.3 1996/03/26 16:44:48 12 12 REMOVECH 6.0 2003/05/08 16:20:34 12 12 HDREDIT2 1.6 2003/05/08 16:34:39 ? ? CLEAN 4.2 2003/05/08 16:36:35 12 12 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:08 12 12 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 59901.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRES 55 5 -2.00 5000.00 1.00000 999.000 3.00 TEMP 55 5 0.00 20.00 0.01000 999.000 3.00 COND 55 5 0.00 2.00 0.00010 999.000 2.50 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- TRAN 201 20 0.00 100.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 61 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 61 The following channel(s) were filtered. SAL -The following BINAVE parameters were used: Bin channel = PRES Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = salcor.ccf -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Temperature:thermistor1 Temperature:thermistor2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 1.4 13.1071 39.6 32.5175 2 2.4 13.1145 39.5 32.5065 5 3.0 13.1146 39.6 32.5057 55 4.3 13.1149 39.5 32.5041 18 5.0 13.1151 39.5 32.5035 28 6.1 13.1146 39.5 32.5027 36 6.7 13.1144 39.5 32.5022 26 8.0 13.1147 39.5 32.5011 20 9.1 13.1156 39.6 32.5009 47 10.4 13.1093 39.6 32.5003 4 11.1 13.1140 39.5 32.5000 33 11.6 13.1139 39.6 32.4998 7