*2013/12/16 15:08:03.83 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS SHALLOW ROSETTE FOR JENNIFER Alt S start position 49 33.83 N 138 40.11 W 17:37:26 08-31-1995 Alt S stop position 49 33.86 N 138 40.16 W 17:43:18 08-31-1995 This file had extensive salinity spikes and required significant manual interpolation to remove them. Collection method: Salinity-Temperature-Pressure data were obtained with a Guildline CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *FILE START TIME : UTC 1995/08/31 17:37:26.300 END TIME : UTC 1995/08/31 17:43:18.480 NUMBER OF RECORDS : 101 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 2.3 101.7 2 Temperature 'deg C (IPTS68)' 6.1114 14.3167 3 Transmissivity %/metre 38.4 57.6 4 Salinity PSS-78 32.5387 33.018 5 Number_of_bin_records n/a 2 52 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95120087.ACQ $END *ADMINISTRATION MISSION : 1995-12 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P, WOCE, JGOFS SCIENTIST : Boyd P. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : MP20 EVENT NUMBER : 87 LATITUDE : 49 33.83000 N ! (deg min) LONGITUDE : 138 40.11000 W ! (deg min) LATITUDE 2 : 49 33.86000 N ! (deg min) LONGITUDE 2 : 138 40.16000 W ! (deg min) WATER DEPTH : 3984 $REMARKS Station Latitude : 49 34.00 N Longitude : 48 40.00 W Depth : 3984 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.40 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/08/31 17:37:26.300 END TIME : UTC 1995/08/31 17:43:18.480 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 7515 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (PRESSURE TEMPERATURE CONDUCTIVITY_RATIO) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 -99 (Pressure) (0.1632583E-01 -0.3392123E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1996/03/13 23:15:10 7515 3745 CALIB 7.0 1996/03/14 14:20:02 3745 3745 DESPIKE 1.4 1996/03/15 17:21:27 3745 3745 DESPIKE 1.4 1996/03/18 12:35:35 3745 3745 TIMECOMP 2.2 1996/03/18 12:51:05 3745 3745 DELETE 4.3 1996/03/18 14:20:44 3745 2580 CTDEDIT 3.2 1996/03/20 16:06:24 2580 2580 BOXCAR 2.3 1996/03/20 16:48:13 2580 2580 BINAVE 1.3 1996/03/20 16:57:18 2580 101 CALIB 6.4 1996/03/21 16:36:39 101 101 REMOVECH 1.3 1996/03/26 16:42:53 101 101 REMOVECH 6.0 2003/05/08 16:20:28 101 101 HDREDIT2 1.6 2003/05/08 16:34:30 ? ? CLEAN 4.2 2003/05/08 16:36:24 101 101 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:03 101 101 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 59901.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRES 55 5 -2.00 5000.00 1.00000 999.000 3.00 TEMP 55 5 0.00 20.00 0.01000 999.000 3.00 COND 55 5 0.00 2.00 0.00010 999.000 2.50 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- TRAN 201 20 0.00 100.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 61 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 61 The following channel(s) were filtered. SAL -The following BINAVE parameters were used: Bin channel = PRES Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = salcor.ccf -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Temperature:thermistor1 Temperature:thermistor2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 2.3 14.3167 40.5 32.5405 2 2.9 14.3143 40.5 32.5406 40 4.0 14.3084 40.4 32.5412 26 5.1 14.3107 40.4 32.5414 32 6.0 14.3149 40.5 32.5411 50 6.9 14.3151 40.4 32.5407 28 8.0 14.2623 40.3 32.5403 18 9.0 14.1253 39.0 32.5399 21 10.1 14.1077 38.7 32.5395 52 10.9 14.0980 38.8 32.5392 31 12.0 14.0861 38.6 32.5388 23 13.0 14.0770 38.6 32.5387 26 14.0 14.0662 38.4 32.5394 48 15.0 14.0540 38.8 32.5401 34 16.0 13.9887 38.5 32.5428 19 17.0 13.8304 38.8 32.5463 21 18.0 13.6624 39.2 32.5495 44 19.2 13.5031 39.1 32.5534 12 20.0 13.4112 39.7 32.5560 17 21.0 13.2920 40.2 32.5593 25 22.0 13.2385 40.9 32.5624 52 22.9 13.1568 41.1 32.5654 33 24.0 13.0813 41.3 32.5690 24 25.0 12.9706 41.8 32.5780 23 26.1 12.8979 42.2 32.5904 38 26.9 12.8273 42.9 32.6007 44 28.0 12.5079 43.7 32.6133 30 29.0 12.2881 44.1 32.6219 28 30.0 12.0448 44.4 32.6222 31 31.0 11.9906 44.6 32.6207 31 32.0 11.9779 44.8 32.6190 46 33.0 11.9316 45.0 32.6177 30 34.0 11.7821 45.0 32.6177 23 35.1 11.6123 45.3 32.6269 36 36.0 11.3326 45.6 32.6376 41 37.0 10.5195 46.5 32.6507 30 38.0 10.2383 47.9 32.6631 29 39.0 10.1436 48.1 32.6741 31 40.0 9.7650 48.9 32.6759 36 41.0 9.5436 50.0 32.6764 40 42.0 9.2505 50.9 32.6768 39 43.0 9.1511 51.2 32.6773 28 44.0 9.0159 51.5 32.6778 24 45.1 8.9672 51.6 32.6783 35 45.9 8.9647 51.6 32.6788 40 47.0 8.9190 51.5 32.6806 23 48.1 8.8339 51.7 32.6831 30 48.8 8.7877 51.8 32.6849 48 50.0 8.5450 52.2 32.6876 19 51.1 8.4453 52.3 32.6901 24 51.7 8.4280 52.5 32.6916 30 53.0 8.3851 52.5 32.6936 15 54.0 8.3360 52.7 32.6946 15 55.1 8.2835 52.8 32.6968 27 56.4 8.0855 52.8 32.6991 2 57.0 8.0250 53.4 32.7001 12 58.0 7.9419 53.8 32.7019 15 58.8 7.8771 54.1 32.7033 19 60.2 7.8390 53.7 32.7057 8 61.0 7.7666 54.3 32.7072 13 62.1 7.6513 54.6 32.7089 17 62.9 7.5918 54.6 32.7101 38 64.1 7.5187 54.8 32.7121 14 65.0 7.4482 55.1 32.7134 17 66.0 7.4024 55.3 32.7150 20 66.9 7.3800 55.5 32.7164 39 68.2 7.3255 55.5 32.7184 12 69.0 7.2732 55.6 32.7200 17 70.0 7.1723 55.7 32.7218 17 71.0 7.1179 55.9 32.7237 37 72.3 7.0762 55.9 32.7261 8 73.0 7.0107 56.0 32.7273 16 74.0 6.9146 56.0 32.7293 13 75.0 6.8373 56.2 32.7312 17 75.8 6.7766 56.4 32.7328 20 77.2 6.7487 56.2 32.7356 10 78.0 6.7237 56.4 32.7374 16 79.1 6.6833 56.5 32.7395 29 79.8 6.6807 56.6 32.7411 44 81.0 6.5776 56.6 32.7436 19 82.0 6.4931 56.7 32.7456 18 83.0 6.4533 56.8 32.7480 18 83.9 6.4500 56.9 32.7514 33 85.2 6.4298 56.9 32.7563 10 86.0 6.4122 56.9 32.7592 19 87.1 6.3893 57.0 32.7632 28 88.0 6.3778 57.0 32.7667 46 89.0 6.3382 57.1 32.7707 52 89.9 6.3067 57.1 32.7741 28 91.0 6.2481 57.0 32.7781 17 92.0 6.2097 57.0 32.7822 18 93.1 6.1431 57.2 32.7996 33 94.1 6.1318 57.2 32.8203 3 94.9 6.1114 57.2 32.8376 16 96.0 6.1261 57.2 32.8619 16 97.0 6.1757 57.3 32.8996 18 97.8 6.1997 57.4 32.9227 21 99.1 6.1907 57.3 32.9474 10 100.0 6.1810 57.2 32.9701 12 101.1 6.1721 57.4 32.9998 16 101.7 6.1997 57.6 33.0180 17