*2013/12/16 15:08:02.55 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS WATER SAMPLES FOR DELPHINE Alt S start position 49 34.72 N 138 41.08 W 18:05:52 08-30-1995 Alt S stop position 49 34.79 N 138 41.25 W 18:09:55 08-30-1995 This file had extensive salinity spikes and required significant manual interpolation to remove them. Collection method: Salinity-Temperature-Pressure data were obtained with a Guildline CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *FILE START TIME : UTC 1995/08/30 18:05:52.120 END TIME : UTC 1995/08/30 18:09:55.170 NUMBER OF RECORDS : 101 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1 101 2 Temperature 'deg C (IPTS68)' 6.1672 13.9556 3 Transmissivity %/metre 36.9 57.4 4 Salinity PSS-78 32.5516 32.9872 5 Number_of_bin_records n/a 5 49 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95120069.ACQ $END *ADMINISTRATION MISSION : 1995-12 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P, WOCE, JGOFS SCIENTIST : Boyd P. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : MP20 EVENT NUMBER : 69 LATITUDE : 49 34.72000 N ! (deg min) LONGITUDE : 138 41.08000 W ! (deg min) LATITUDE 2 : 49 34.79000 N ! (deg min) LONGITUDE 2 : 138 41.25000 W ! (deg min) WATER DEPTH : 3984 $REMARKS Station Latitude : 49 34.00 N Longitude : 48 40.00 W Depth : 3984 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.40 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/08/30 18:05:52.120 END TIME : UTC 1995/08/30 18:09:55.170 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 7428 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (PRESSURE TEMPERATURE CONDUCTIVITY_RATIO) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 -99 (Pressure) (0.1632583E-01 -0.3392123E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1996/03/13 22:29:22 7428 3693 CALIB 7.0 1996/03/14 14:15:18 3693 3693 DESPIKE 1.4 1996/03/15 17:16:39 3693 3693 DESPIKE 1.4 1996/03/18 12:33:45 3693 3693 TIMECOMP 2.2 1996/03/18 12:48:10 3693 3693 DELETE 4.3 1996/03/18 14:18:56 3693 2432 CTDEDIT 3.2 1996/03/20 12:52:54 2432 2432 BOXCAR 2.3 1996/03/20 16:46:10 2432 2432 BINAVE 1.3 1996/03/20 16:56:25 2432 101 CALIB 6.4 1996/03/21 16:35:57 101 101 REMOVECH 1.3 1996/03/26 16:42:18 101 101 REMOVECH 6.0 2003/05/08 16:20:27 101 101 HDREDIT2 1.6 2003/05/08 16:34:28 ? ? CLEAN 4.2 2003/05/08 16:36:21 101 101 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:02 101 101 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 59901.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRES 55 5 -2.00 5000.00 1.00000 999.000 3.00 TEMP 55 5 0.00 20.00 0.01000 999.000 3.00 COND 55 5 0.00 2.00 0.00010 999.000 2.50 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- TRAN 201 20 0.00 100.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 61 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 61 The following channel(s) were filtered. SAL -The following BINAVE parameters were used: Bin channel = PRES Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = salcor.ccf -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Temperature:thermistor1 Temperature:thermistor2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 1.0 13.9556 36.9 32.5567 31 2.1 13.9499 38.7 32.5561 38 3.0 13.9392 38.9 32.5555 6 4.0 13.9491 39.2 32.5548 32 4.9 13.9471 39.5 32.5542 44 6.1 13.9456 39.6 32.5533 32 7.0 13.9428 39.8 32.5533 49 8.0 13.9397 39.6 32.5520 21 9.1 13.9355 39.7 32.5517 24 9.9 13.9284 39.8 32.5526 44 11.0 13.9182 39.6 32.5524 17 12.0 13.9159 39.5 32.5517 15 13.0 13.9061 39.6 32.5518 18 13.9 13.8976 39.7 32.5524 41 15.0 13.8945 39.7 32.5516 24 16.0 13.8909 39.6 32.5519 22 17.0 13.8734 39.7 32.5544 22 18.0 13.8240 39.9 32.5604 25 19.1 13.6326 39.9 32.5708 43 20.0 13.4612 38.7 32.5801 31 21.0 13.3740 38.3 32.5891 21 22.1 13.3421 39.0 32.5917 30 22.9 13.3055 39.7 32.5941 32 24.0 13.2545 40.7 32.5961 23 25.0 13.1714 41.4 32.5996 25 26.0 13.0963 42.1 32.6010 32 27.0 13.0603 42.6 32.5945 45 28.0 13.0463 42.7 32.5916 30 29.0 13.0021 42.9 32.5933 19 30.0 12.9208 43.3 32.5959 17 31.0 12.6828 43.8 32.5985 20 31.9 12.2978 44.1 32.6032 26 33.3 11.9717 44.2 32.6114 7 34.0 11.7278 44.5 32.6131 13 35.0 10.9468 45.8 32.6142 16 36.1 10.4536 47.1 32.6154 39 36.9 10.3741 47.3 32.6161 40 38.0 10.1207 47.9 32.6173 18 39.0 9.8685 48.1 32.6203 21 40.0 9.5027 48.7 32.6265 40 41.0 9.3849 49.1 32.6325 39 42.0 9.2185 49.7 32.6386 27 43.0 9.1691 49.9 32.6449 17 44.0 9.1513 50.5 32.6513 16 45.1 9.1015 50.8 32.6591 34 45.9 9.0597 50.6 32.6656 12 47.0 8.9707 51.6 32.6747 20 48.1 8.8714 51.8 32.6867 29 49.0 8.6987 52.0 32.6940 24 50.0 8.4812 52.3 32.7017 19 51.1 8.4063 52.5 32.7096 32 51.9 8.3646 52.7 32.7164 48 53.0 8.2859 52.9 32.7246 26 54.0 8.1848 53.1 32.7299 22 55.0 7.9685 53.7 32.7300 20 56.1 7.9118 54.1 32.7283 45 56.9 7.8401 54.3 32.7274 28 58.0 7.6742 54.6 32.7254 16 59.0 7.6068 54.8 32.7153 17 60.1 7.5302 55.0 32.7103 29 61.3 7.4298 55.0 32.7078 5 62.0 7.4040 55.2 32.7064 15 63.0 7.3853 55.2 32.7057 17 64.1 7.3764 55.3 32.7055 47 65.0 7.3111 55.3 32.7110 20 66.0 7.2119 55.6 32.7145 18 67.1 7.1639 55.7 32.7142 39 67.9 7.1377 55.7 32.7134 21 69.0 7.0667 55.7 32.7134 12 70.0 7.0028 55.8 32.7139 12 71.0 6.9819 55.9 32.7160 15 71.7 6.9686 56.2 32.7187 12 73.0 6.9000 55.9 32.7218 11 74.0 6.8637 56.2 32.7249 15 74.9 6.8335 56.3 32.7290 24 76.2 6.7696 56.2 32.7368 9 77.0 6.7384 56.4 32.7418 16 78.1 6.6565 56.6 32.7469 21 79.0 6.5868 56.7 32.7503 37 80.0 6.5146 56.8 32.7537 25 81.0 6.4691 56.8 32.7575 28 82.0 6.4006 56.8 32.7607 47 83.0 6.3534 56.9 32.7638 24 84.0 6.3345 56.9 32.7720 23 85.0 6.2733 57.0 32.7818 25 86.0 6.2774 57.0 32.7905 25 87.0 6.2266 57.1 32.7985 30 87.9 6.2469 57.1 32.7996 49 89.0 6.2531 57.0 32.8146 16 90.0 6.2481 57.0 32.8340 12 91.0 6.2239 57.1 32.8570 15 91.8 6.2006 57.2 32.8727 19 93.2 6.1915 57.2 32.8879 10 94.0 6.1946 57.2 32.8999 12 95.0 6.1962 57.2 32.9056 14 96.1 6.1971 57.3 32.9102 20 96.6 6.1968 57.4 32.9149 14 98.0 6.1978 57.1 32.9328 9 99.0 6.1895 57.0 32.9489 8 100.0 6.1774 57.1 32.9608 11 101.0 6.1672 57.4 32.9872 17