*2013/12/16 15:08:00.15 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 49 17.05 N 134 40.20 W 14:47:54 08-28-1995 Alt S stop position 49 17.11 N 134 40.25 W 14:50:36 08-28-1995 This file had extensive salinity spikes and required significant manual interpolation to remove them. Collection method: Salinity-Temperature-Pressure data were obtained with a Guildline CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *FILE START TIME : UTC 1995/08/28 14:47:54.260 END TIME : UTC 1995/08/28 14:50:36.520 NUMBER OF RECORDS : 87 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.3 86.8 2 Temperature 'deg C (IPTS68)' 7.9253 14.937 3 Transmissivity %/metre 38.9 59 4 Salinity PSS-78 32.1666 32.4522 5 Number_of_bin_records n/a 2 53 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95120047.ACQ $END *ADMINISTRATION MISSION : 1995-12 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P, WOCE, JGOFS SCIENTIST : Boyd P. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : MP16 EVENT NUMBER : 47 LATITUDE : 49 17.05000 N ! (deg min) LONGITUDE : 134 40.20000 W ! (deg min) LATITUDE 2 : 49 17.11000 N ! (deg min) LONGITUDE 2 : 134 40.25000 W ! (deg min) WATER DEPTH : 3260 $REMARKS Station Latitude : 48 58.20 N Longitude : 40 40.00 W Depth : 3260 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.40 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/08/28 14:47:54.260 END TIME : UTC 1995/08/28 14:50:36.520 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 6320 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (PRESSURE TEMPERATURE CONDUCTIVITY_RATIO) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 -99 (Pressure) (0.1632583E-01 -0.3392123E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1996/03/13 20:54:10 6320 3149 CALIB 7.0 1996/03/14 14:07:24 3149 3149 DESPIKE 1.4 1996/03/15 17:13:09 3149 3149 DESPIKE 1.4 1996/03/18 12:31:37 3149 3149 TIMECOMP 2.2 1996/03/18 12:46:13 3149 3149 DELETE 4.3 1996/03/18 14:16:59 3149 2338 CTDEDIT 3.2 1996/03/20 11:39:43 2338 2338 BOXCAR 2.3 1996/03/20 16:44:17 2338 2338 BINAVE 1.3 1996/03/20 16:55:44 2338 87 CALIB 6.4 1996/03/21 16:33:25 87 87 REMOVECH 1.3 1996/03/26 16:41:19 87 87 REMOVECH 6.0 2003/05/08 16:20:25 87 87 HDREDIT2 1.6 2003/05/08 16:34:23 ? ? CLEAN 4.2 2003/05/08 16:36:16 87 87 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:08:00 87 87 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 59901.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRES 55 5 -2.00 5000.00 1.00000 999.000 3.00 TEMP 55 5 0.00 20.00 0.01000 999.000 3.00 COND 55 5 0.00 2.00 0.00010 999.000 2.50 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- TRAN 201 20 0.00 100.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 61 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 61 The following channel(s) were filtered. SAL -The following BINAVE parameters were used: Bin channel = PRES Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = salcor.ccf -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Temperature:thermistor1 Temperature:thermistor2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 1.3 14.9360 47.3 32.1669 28 1.6 14.9363 47.2 32.1674 18 3.2 14.9366 47.4 32.1673 16 3.7 14.9370 47.8 32.1673 12 5.2 14.9361 49.0 32.1677 41 6.4 14.9354 49.7 32.1679 2 7.0 14.9346 49.8 32.1680 22 8.1 14.9344 50.0 32.1681 46 9.0 14.9341 50.0 32.1681 27 10.0 14.9343 50.0 32.1681 21 11.0 14.9342 50.0 32.1682 38 11.9 14.9339 50.0 32.1683 33 13.0 14.9335 50.0 32.1681 20 14.0 14.9332 50.0 32.1681 21 15.1 14.9338 50.1 32.1680 50 15.9 14.9339 50.1 32.1678 27 17.0 14.9326 49.9 32.1679 16 18.1 14.9282 50.0 32.1678 18 19.1 14.9239 50.0 32.1676 47 19.9 14.9235 50.0 32.1672 26 21.0 14.9258 49.9 32.1670 15 22.0 14.9303 50.0 32.1669 21 23.0 14.9297 50.0 32.1670 53 24.0 14.9282 49.9 32.1669 18 25.0 14.9011 49.9 32.1668 15 26.1 14.7688 49.3 32.1667 26 26.7 14.6743 49.2 32.1666 28 28.0 14.5725 48.4 32.1666 14 29.0 14.4839 48.4 32.1686 16 30.1 14.2056 47.9 32.1750 29 30.7 13.8609 47.5 32.1785 29 32.0 13.0778 42.1 32.1859 17 33.0 12.5658 39.9 32.1919 15 34.1 11.7855 38.9 32.1979 29 34.9 11.0916 39.1 32.2028 46 35.9 10.4941 42.8 32.2088 21 37.0 9.9360 46.1 32.2149 18 38.1 9.5320 48.2 32.2214 32 38.9 9.3539 48.5 32.2259 43 40.0 9.2980 48.4 32.2322 19 41.0 9.2493 48.4 32.2387 17 42.1 9.2326 48.5 32.2467 37 42.9 9.2216 48.5 32.2523 34 44.0 9.1505 48.5 32.2598 18 45.0 8.7777 50.2 32.2674 20 46.1 8.6327 51.6 32.2749 38 46.9 8.5097 52.2 32.2804 39 48.0 8.4006 53.2 32.2802 25 49.0 8.3641 53.6 32.2752 20 50.1 8.3067 54.1 32.2757 31 50.9 8.2505 54.5 32.2767 39 52.0 8.2125 54.8 32.2781 17 53.0 8.1798 55.0 32.2796 20 54.1 8.1423 55.3 32.2809 53 55.0 8.1150 55.6 32.2817 24 56.0 8.0887 55.9 32.2826 18 57.1 8.0824 56.1 32.2844 35 57.9 8.0756 56.2 32.2877 31 59.0 8.0587 56.3 32.2875 22 60.0 8.0448 56.6 32.2896 25 61.0 8.0239 56.7 32.2918 33 62.0 8.0220 56.7 32.2915 24 63.0 8.0094 56.9 32.2968 31 64.0 7.9899 57.1 32.3004 32 65.0 7.9802 57.2 32.3007 24 66.0 7.9678 57.5 32.3030 24 67.0 7.9495 57.7 32.3151 31 68.0 7.9362 57.9 32.3182 26 69.0 7.9357 58.0 32.3184 23 70.1 7.9338 58.2 32.3210 29 71.0 7.9309 58.3 32.3278 37 71.9 7.9301 58.4 32.3329 24 73.0 7.9276 58.4 32.3361 19 74.1 7.9270 58.6 32.3428 28 75.0 7.9260 58.6 32.3476 33 76.0 7.9253 58.6 32.3539 23 77.0 7.9293 58.7 32.3578 21 78.0 7.9376 58.8 32.3677 24 79.0 7.9456 58.8 32.3753 38 79.9 7.9510 58.8 32.3908 31 81.0 7.9576 58.9 32.4035 23 82.0 7.9607 58.9 32.4122 18 83.0 7.9688 58.9 32.4247 23 84.0 7.9749 59.0 32.4283 33 85.0 7.9834 58.9 32.4371 33 86.0 7.9896 59.0 32.4497 30 86.8 7.9914 59.0 32.4522 27