*2013/12/16 15:07:57.88 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS water for delphine 0 5 10 20 30 45 Alt S start position 48 58.29 N 130 39.94 W 16:44:11 08-26-1995 Alt S stop position 48 58.31 N 130 40.00 W 16:47:35 08-26-1995 This file had extensive salinity spikes and required significant manual interpolation to remove them. Collection method: Salinity-Temperature-Pressure data were obtained with a Guildline CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *FILE START TIME : UTC 1995/08/26 16:44:10.130 END TIME : UTC 1995/08/26 16:47:35.670 NUMBER OF RECORDS : 48 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.4 47.1 2 Temperature 'deg C (IPTS68)' 9.4229 16.203 3 Transmissivity %/metre 40.9 54.4 4 Salinity PSS-78 32.0914 32.468 5 Number_of_bin_records n/a 1 58 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95120030.ACQ $END *ADMINISTRATION MISSION : 1995-12 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P, WOCE, JGOFS SCIENTIST : Boyd P. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : MP12 EVENT NUMBER : 30 LATITUDE : 48 58.29000 N ! (deg min) LONGITUDE : 130 39.94000 W ! (deg min) LATITUDE 2 : 48 58.31000 N ! (deg min) LONGITUDE 2 : 130 40.00000 W ! (deg min) WATER DEPTH : 3260 $REMARKS Station Latitude : 48 58.20 N Longitude : 40 40.00 W Depth : 3260 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.40 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/08/26 16:44:10.130 END TIME : UTC 1995/08/26 16:47:35.670 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 6916 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (PRESSURE TEMPERATURE CONDUCTIVITY_RATIO) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 -99 (Pressure) (0.1632583E-01 -0.3392123E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1996/03/13 19:20:19 6916 3438 CALIB 7.0 1996/03/14 14:01:22 3438 3438 DESPIKE 1.4 1996/03/15 17:10:17 3438 3438 DESPIKE 1.4 1996/03/18 12:29:30 3438 3438 TIMECOMP 2.2 1996/03/18 12:44:38 3438 3438 DELETE 4.3 1996/03/18 14:15:29 3438 1599 CTDEDIT 3.2 1996/03/20 10:58:35 1599 1599 BOXCAR 2.3 1996/03/20 16:42:46 1599 1599 BINAVE 1.3 1996/03/20 16:55:12 1599 48 CALIB 6.4 1996/03/21 16:32:48 48 48 REMOVECH 1.3 1996/03/26 16:40:27 48 48 REMOVECH 6.0 2003/05/08 16:20:23 48 48 HDREDIT2 1.6 2003/05/08 16:34:19 ? ? CLEAN 4.2 2003/05/08 16:36:11 48 48 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:07:57 48 48 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 59901.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRES 55 5 -2.00 5000.00 1.00000 999.000 3.00 TEMP 55 5 0.00 20.00 0.01000 999.000 3.00 COND 55 5 0.00 2.00 0.00010 999.000 2.50 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- TRAN 201 20 0.00 100.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 61 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 61 The following channel(s) were filtered. SAL -The following BINAVE parameters were used: Bin channel = PRES Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = salcor.ccf -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Temperature:thermistor1 Temperature:thermistor2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 0.4 16.2030 54.3 32.1096 1 1.0 16.2024 54.2 32.1096 39 1.6 16.2024 54.4 32.1094 17 3.0 16.2007 54.3 32.1089 54 4.0 16.2009 54.3 32.1085 33 5.0 16.2007 54.3 32.1086 50 6.0 16.1984 54.3 32.1101 48 6.9 16.1965 54.3 32.1111 44 8.0 16.1907 54.3 32.1092 29 9.0 16.1516 54.1 32.1072 56 10.0 16.0331 53.8 32.1050 40 10.9 15.9575 53.8 32.1031 42 12.0 15.9582 53.8 32.1017 24 13.0 15.9583 53.8 32.1006 32 14.3 15.8634 53.8 32.0931 6 15.0 15.8563 53.8 32.0914 24 16.1 15.8649 53.8 32.0927 57 17.0 15.8340 53.6 32.1010 29 18.0 15.4104 52.7 32.1190 40 18.9 15.0628 52.0 32.1457 54 20.0 14.9465 51.7 32.1814 31 21.1 14.6547 51.5 32.2153 49 21.9 14.4064 51.0 32.2425 41 23.0 13.4345 50.4 32.2758 28 24.1 13.0613 50.0 32.3099 57 25.3 12.6341 49.8 32.3436 13 26.0 12.3514 49.7 32.3437 27 27.0 12.1517 49.7 32.3437 38 28.0 11.9012 49.8 32.3438 58 29.2 11.7956 49.7 32.3438 14 30.0 11.5449 49.5 32.3445 27 30.7 11.3745 49.6 32.3483 24 32.2 11.1082 48.2 32.3584 34 33.0 11.0021 47.8 32.3641 9 34.0 10.9131 46.7 32.3699 21 34.7 10.8687 46.3 32.3722 15 36.1 10.8209 46.0 32.3737 16 37.1 10.7455 44.9 32.3848 31 38.4 10.6460 43.5 32.4018 7 39.0 10.4101 41.0 32.4098 35 40.0 9.9715 40.9 32.4216 53 40.9 9.9215 41.4 32.4326 47 42.0 9.8440 42.1 32.4421 47 42.9 9.7860 43.1 32.4471 43 44.0 9.5898 44.9 32.4533 36 44.7 9.5402 45.5 32.4569 21 46.1 9.5112 46.2 32.4643 22 47.1 9.4229 47.5 32.4680 36