*2013/12/16 15:07:55.09 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS water samples delphine Alt S start position 48 39.37 N 126 39.82 W 17:02:19 08-24-1995 Alt S stop position 48 39.39 N 126 39.79 W 17:04:35 08-24-1995 This file had extensive salinity spikes and required significant manual interpolation to remove them. Collection method: Salinity-Temperature-Pressure data were obtained with a Guildline CTD. References: Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations Made Along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences 156: 45 pp. *FILE START TIME : UTC 1995/08/24 17:02:18.370 END TIME : UTC 1995/08/24 17:04:35.690 NUMBER OF RECORDS : 46 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.4 46 2 Temperature 'deg C (IPTS68)' 10.0273 15.9487 3 Transmissivity %/metre 38.8 53.3 4 Salinity PSS-78 31.9348 32.3618 5 Number_of_bin_records n/a 12 59 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95120008.ACQ $END *ADMINISTRATION MISSION : 1995-12 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P, WOCE, JGOFS SCIENTIST : Boyd P. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P STATION : MP04 EVENT NUMBER : 8 LATITUDE : 48 39.37000 N ! (deg min) LONGITUDE : 126 39.80000 W ! (deg min) LATITUDE 2 : 48 39.39000 N ! (deg min) LONGITUDE 2 : 126 39.79000 W ! (deg min) WATER DEPTH : 1342 $REMARKS Station Latitude : 48 39.00 N Longitude : 36 40.00 W Depth : 1342 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : WOCE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.40 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/08/24 17:02:18.370 END TIME : UTC 1995/08/24 17:04:35.690 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 5245 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Temperature:Voltage_Reference n/a 10 n/a (-15600 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05) Transmissivity %/25cm 10 -99 (0 0.3052E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (PRESSURE TEMPERATURE CONDUCTIVITY_RATIO) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 -99 (Pressure) (0.1632583E-01 -0.3392123E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1996/03/13 17:10:29 5245 2575 CALIB 7.0 1996/03/14 13:55:36 2575 2575 DESPIKE 1.4 1996/03/15 17:08:39 2575 2575 DESPIKE 1.4 1996/03/18 12:28:10 2575 2575 TIMECOMP 2.2 1996/03/18 12:43:53 2575 2575 DELETE 4.3 1996/03/18 14:14:43 2575 1698 CTDEDIT 3.2 1996/03/20 10:37:50 1698 1698 BOXCAR 2.3 1996/03/20 16:41:54 1698 1698 BINAVE 1.3 1996/03/20 16:54:50 1698 46 CALIB 6.4 1996/03/21 16:32:29 46 46 REMOVECH 1.3 1996/03/26 16:39:27 46 46 REMOVECH 6.0 2003/05/08 16:20:20 46 46 HDREDIT2 1.6 2003/05/08 16:34:14 ? ? CLEAN 4.2 2003/05/08 16:36:04 46 46 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:07:55 46 46 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 59901.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRES 55 5 -2.00 5000.00 1.00000 999.000 3.00 TEMP 55 5 0.00 20.00 0.01000 999.000 3.00 COND 55 5 0.00 2.00 0.00010 999.000 2.50 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 TEMPERATURE:THERMIST 55 5 0.00 20.00 0.01000 999.000 3.00 -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- TRAN 201 20 0.00 100.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 21 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 61 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 61 The following channel(s) were filtered. SAL -The following BINAVE parameters were used: Bin channel = PRES Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = .0 Calibration file = salcor.ccf -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Temperature:thermistor1 Temperature:thermistor2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 1.4 15.9438 50.4 31.9371 12 1.7 15.9487 50.4 31.9348 25 3.0 15.9436 50.5 31.9356 32 4.1 15.9378 50.3 31.9389 53 5.0 15.9364 50.3 31.9389 24 6.1 15.9326 50.4 31.9390 42 6.9 15.9316 50.5 31.9390 52 8.0 15.9308 50.4 31.9388 36 9.0 15.9278 50.5 31.9390 52 10.1 15.9223 50.4 31.9381 22 11.0 15.9175 50.3 31.9375 37 12.0 15.9151 50.3 31.9372 57 13.0 15.9120 50.4 31.9367 49 13.9 15.9083 50.3 31.9365 37 15.1 15.8987 50.3 31.9365 38 15.7 15.8966 50.4 31.9363 12 17.0 15.8911 50.4 31.9357 24 18.1 15.8831 50.4 31.9367 59 19.0 15.8674 50.3 31.9363 31 20.1 15.8417 50.3 31.9390 49 20.9 15.7365 50.4 31.9463 38 22.1 15.5764 50.1 31.9597 49 22.9 15.4278 49.6 31.9679 39 24.0 15.1670 48.4 31.9767 30 25.0 15.0304 48.3 32.0141 44 26.1 14.4018 46.3 32.0589 20 27.0 13.7785 42.1 32.1174 24 27.9 13.5685 39.7 32.1456 42 29.1 13.2068 39.3 32.1626 19 30.0 12.9509 39.3 32.1749 39 30.9 12.8295 39.1 32.1850 49 32.0 12.5833 38.8 32.1882 28 33.1 12.3414 39.5 32.1903 50 34.0 12.2193 40.7 32.1982 47 34.9 11.9246 43.3 32.2281 45 36.0 11.6370 43.9 32.2451 27 37.1 11.3168 45.1 32.2686 36 37.7 11.2053 45.2 32.2741 18 39.0 10.9774 47.5 32.2880 26 40.0 10.7443 48.9 32.3081 50 41.0 10.5098 51.3 32.3190 35 42.0 10.3702 52.0 32.3318 40 43.0 10.2413 52.9 32.3328 42 44.0 10.2031 53.3 32.3297 47 45.0 10.1746 52.8 32.3292 34 46.0 10.0273 52.1 32.3618 37