*2013/12/16 15:07:46.78 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS CTD ONLY, US AGAIN Alt S start position 4921.82N 12634.23W 18:48:31 05-01-1995 Alt S stop position 4921.86N 12634.19W 18:51:49 05-01-1995 *FILE START TIME : UTC 1995/05/01 18:48:31.550 END TIME : UTC 1995/05/01 18:51:50.600 NUMBER OF RECORDS : 27 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.8 26.7 2 Temperature 'deg C (IPTS68)' 9.8018 11.3113 3 Transmissivity %/metre 31.1 48 4 Salinity PSS-78 30.3826 32.0019 5 Number_of_bin_records n/a 10 50 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95070057.ACQ $END *ADMINISTRATION MISSION : 1995-07 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, MASS SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Juan de Fuca, WCVI STATION : LG00 EVENT NUMBER : 57 LATITUDE : 49 21.82000 N ! (deg min) LONGITUDE : 126 34.23000 W ! (deg min) LATITUDE 2 : 49 21.86000 N ! (deg min) LONGITUDE 2 : 126 34.19000 W ! (deg min) WATER DEPTH : 30 $REMARKS Station Latitude : 49 21.80 N Longitude : 126 34.00 W Depth : 30 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : DELL450DE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.37 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/05/01 18:48:31.550 END TIME : UTC 1995/05/01 18:51:50.600 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 2758 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Digital_IO n/a Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Digital_IO none 10 n/a (0 1) Temperature:Voltage_Reference n/a 10 n/a (-3930 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05 0) Transmissivity %/25cm 10 -99 (0.1162 0.29567E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 ' ' (Pressure) (0.1218342E-01 -0.979192E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1995/12/29 12:28:26 2758 1378 CALIB 6.4 1996/01/20 13:04:34 1378 1378 DESPIKE 1.4 1996/01/21 12:00:44 1378 1378 TIMECOMP 2.2 1996/01/21 12:25:14 1378 1378 DELETE 4.3 1996/01/21 12:36:24 1378 879 BOXCAR 2.3 1996/01/21 13:18:06 879 879 BINAVE 1.3 1996/01/21 13:34:15 879 27 CALIB 6.4 1996/02/10 14:22:20 27 27 REMOVECH 2.0 1996/02/10 14:34:36 27 27 HEADEDIT 1.1 1996/02/10 14:41:34 ' ' ' ' HDREDIT2 1.6 2003/09/05 14:55:51 ? ? CLEAN 4.4 2003/09/05 14:56:29 27 27 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:07:46 27 27 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 9507RAW.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 3500.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 20.00 0.00500 999.000 3.00 CONDUCTIVITY_RATIO 55 5 0.60 1.00 0.00010 999.000 3.00 Transmissivity 55 5 0.00 85.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 11 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9507COR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO TEMPERATURE:THERMISTOR1 TEMPERATURE:THERMISTOR2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 0.8 11.3113 31.1 30.3826 10 2.0 11.3080 35.4 30.3869 41 3.0 11.2069 35.5 30.4084 39 4.0 11.1169 35.5 30.4286 36 5.0 11.0621 35.5 30.4450 39 6.0 10.8830 35.9 30.5657 50 6.9 10.6389 38.8 30.7474 30 8.0 10.5179 39.6 30.8225 31 9.0 10.5005 39.5 30.8318 37 10.0 10.4567 39.0 30.8530 35 11.0 10.3747 38.8 30.8863 30 12.0 10.2806 39.6 30.9757 30 13.0 10.2261 41.2 31.0657 37 14.1 10.1270 42.2 31.1582 25 15.0 10.0625 43.2 31.2145 32 16.0 10.0092 44.3 31.2858 35 17.0 9.9609 44.9 31.3799 30 18.0 9.9367 45.4 31.4536 29 19.0 9.9306 45.9 31.4823 30 20.0 9.9239 46.1 31.5197 36 21.0 9.8993 46.7 31.6034 37 22.0 9.8793 47.2 31.7499 34 23.0 9.8706 47.3 31.7961 35 24.0 9.8596 47.5 31.8428 26 25.0 9.8200 47.8 31.9481 24 26.0 9.8110 48.0 31.9760 39 26.7 9.8018 48.0 32.0019 22