*2013/12/16 15:07:46.70 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 4918.73N 12638.35W 17:42:39 05-01-1995 Alt S stop position 4918.77N 12638.40W 17:45:41 05-01-1995 *FILE START TIME : UTC 1995/05/01 17:42:38.330 END TIME : UTC 1995/05/01 17:45:41.850 NUMBER OF RECORDS : 23 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.1 23 2 Temperature 'deg C (IPTS68)' 10.332 11.5009 3 Transmissivity %/metre 28.6 46.9 4 Salinity PSS-78 31.0317 31.9542 5 Number_of_bin_records n/a 16 40 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS File name : 95070053.ACQ $END *ADMINISTRATION MISSION : 1995-07 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, MASS SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Juan de Fuca, WCVI STATION : LG02 EVENT NUMBER : 53 LATITUDE : 49 18.73000 N ! (deg min) LONGITUDE : 126 38.35000 W ! (deg min) LATITUDE 2 : 49 18.77000 N ! (deg min) LONGITUDE 2 : 126 38.40000 W ! (deg min) WATER DEPTH : 99 $REMARKS Station Latitude : 49 18.70 N Longitude : 126 38.10 W Depth : 105 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : DELL450DE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.37 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/05/01 17:42:38.330 END TIME : UTC 1995/05/01 17:45:41.850 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 7212 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Digital_IO n/a Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Digital_IO none 10 n/a (0 1) Temperature:Voltage_Reference n/a 10 n/a (-3930 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure dBars 10 -99 (0 1 0) Temperature 'DEG C (ITS68)' 10 -99 (-5.92425 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 -99 (-0.519E-03 0.16918E-05 0) Transmissivity %/25cm 10 -99 (0.1162 0.29567E-02) Temperature:thermistor1 'DEG C (ITS68)' 34 -99 (3591.57 -0.654089E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.22E-01) Temperature:thermistor2 'DEG C (ITS68)' 34 -99 (3628.5 -0.766183E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.21E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 11 ' ' (Pressure) (0.1218342E-01 -0.979192E-06) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1995/12/29 12:27:12 7212 3545 CALIB 6.4 1996/01/20 13:04:27 3545 3545 DESPIKE 1.4 1996/01/21 12:00:24 3545 3545 TIMECOMP 2.2 1996/01/21 12:25:01 3545 3545 DELETE 4.3 1996/01/21 12:36:14 3545 625 BOXCAR 2.3 1996/01/21 13:18:01 625 625 BINAVE 1.3 1996/01/21 13:34:12 625 23 CALIB 6.4 1996/02/10 14:22:19 23 23 REMOVECH 2.0 1996/02/10 14:34:35 23 23 HEADEDIT 1.1 1996/02/10 14:41:32 ' ' ' ' HDREDIT2 1.6 2003/09/05 14:55:51 ? ? CLEAN 4.4 2003/09/05 14:56:29 23 23 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:07:46 23 23 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = 9507RAW.CCF -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- PRESSURE 55 5 -2.00 3500.00 0.10000 999.000 3.00 TEMPERATURE 55 5 0.00 20.00 0.00500 999.000 3.00 CONDUCTIVITY_RATIO 55 5 0.60 1.00 0.00010 999.000 3.00 Transmissivity 55 5 0.00 85.00 0.10000 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0400 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 20.00 Minimum Surface Salinity: 25.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 11 points) will be deleted Sample interval = 0.05 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 21 The following channel(s) were filtered. SALINITY -The following BINAVE parameters were used: Bin channel = PRESSURE Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9507COR.CCF -The following CHANNEL(S) were removed from file. CONDUCTIVITY_RATIO TEMPERATURE:THERMISTOR1 TEMPERATURE:THERMISTOR2 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- -5-- !Pressu Temperat Trans Salinity Numb !re ure missi er_o ! vity ~bin ! _rec ! ords !------ -------- ----- -------- ---- *END OF HEADER 1.1 11.3814 28.6 31.0317 16 2.0 11.3952 30.6 31.1639 36 3.0 11.4200 31.4 31.1996 34 4.0 11.4730 38.7 31.3146 40 5.0 11.4614 40.9 31.3550 30 6.0 11.4714 44.3 31.4238 22 7.0 11.4911 44.3 31.5111 24 8.0 11.5009 44.8 31.5371 32 9.0 11.4907 44.6 31.5598 28 10.0 11.4540 44.8 31.6073 21 11.0 11.3234 45.2 31.6915 22 12.0 11.1819 45.1 31.7467 36 13.0 11.0767 44.8 31.7832 31 13.9 10.9312 45.1 31.8112 20 15.0 10.8556 46.0 31.8148 22 16.0 10.7711 46.9 31.8167 27 17.0 10.7261 46.8 31.8237 28 18.0 10.7087 46.6 31.8286 23 19.0 10.6963 46.4 31.8379 28 20.0 10.6699 46.0 31.8588 27 21.0 10.6269 45.6 31.8843 25 22.0 10.4053 45.0 31.9392 23 23.0 10.3320 44.5 31.9542 30