*2013/12/16 15:07:27.34 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start position 4830.81N 12332.48W 17:04:54 02-01-1995 Alt S stop position 4830.85N 12332.48W 17:10:24 02-01-1995 *FILE START TIME : UTC 1995/02/01 17:04:53.260 END TIME : UTC 1995/02/01 17:10:24.860 NUMBER OF RECORDS : 139 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------- ---------------- -------------- -------------- 1 Pressure decibar 1.1 138.6 2 Temperature 'deg C (IPTS68)' 8.3509 9.4347 3 Transmissivity %/metre 44.7 65.4 4 Salinity PSS-78 29.4169 31.2083 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 $END $REMARKS File name : 95020005.ACQ $END *ADMINISTRATION MISSION : 1995-02 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet SCIENTIST : Stucchi D. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Saanich Inlet STATION : S1 EVENT NUMBER : 5 LATITUDE : 48 30.80000 N ! (deg min) LONGITUDE : 123 32.49000 W ! (deg min) LATITUDE 2 : 48 30.85000 N ! (deg min) LONGITUDE 2 : 123 32.48000 W ! (deg min) WATER DEPTH : 160 $REMARKS Station Latitude : 48 31.22 N Longitude : 123 32.27 W Depth : 160 $END *INSTRUMENT TYPE : Guildline WOCE CTD MODEL : DELL450DE SERIAL NUMBER : 59,901 $REMARKS Acquisition program : CTD.EXE version 1.35 CTD data type : 3 ! Guildline WOCE system Control String : Set by program GCTD $END *RAW START TIME : UTC 1995/02/01 17:04:53.260 END TIME : UTC 1995/02/01 17:10:24.860 TIME INCREMENT : 0 0 0 0 50 ! (day hr min sec ms) NUMBER OF RECORDS : 11211 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !------------------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS Digital_IO n/a Temperature:Voltage_Reference n/a Temperature:thermistor1 n/a Temperature:thermistor2 n/a Time_stamp n/a Temperature:Analog_Probe n/a Temperature:digiquartz n/a $END $REMARKS The raw data channel order is not represented by the above table. $END *CALIBRATION $TABLE: RAW CHANNELS !Name Units Fmla Pad Coefficients !------------------------------- --------------- ---- ------ ------------ Digital_IO none 10 n/a (0 1) Temperature:Voltage_Reference n/a 10 n/a (-3930 1) Time_stamp none 10 n/a (0 1) Temperature:Analog_Probe n/a 10 n/a (-16480 1) Temperature:digiquartz n/a 10 n/a (0 1) Pressure DBAR 10 n/a (0.6 1 0) Temperature 'DEG C (ITS68)' 10 n/a (-5.92275 0.38917E-04 0.48229E-13) Conductivity_ratio n/a 63 n/a (-0.979407E-03 0.169331E-05 0) Transmissivity '%/25 cm' 10 n/a (0 0.306E-02) Temperature:thermistor1 n/a 34 n/a (3593.367 -0.6540184E-01 0.1017114E-02 0.2943959E-03 0.1568311E-06 0.19E-01) Temperature:thermistor2 n/a 34 n/a (3630.424 -0.7660066E-01 0.1045541E-02 0.2903017E-03 0.1588842E-06 0.15E-01) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 30 ' ' (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 10 -99.9 () (0.7E-02 1) $END $REMARKS The following are the WOCE CTD temperature compensation values. Temperature Range 3900 4520 Zero Degrees C 3956 Cu Temperature .1240000E+01 .0000000E+00 Conductivity_Ratio -.4720000E+00 .0000000E+00 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.01 1995/12/29 11:34:27 11211 5601 CALIB 6.4 1996/01/06 12:23:35 5601 5601 DELETE 4.3 1996/01/06 12:40:40 5601 710 CTDEDIT 3.2 1996/01/06 13:49:56 710 708 BINAVE 1.3 1996/01/06 15:33:18 708 139 CALIB 7.0 1996/03/06 09:45:53 139 139 REMOVECH 2.1 1996/03/06 09:55:58 139 139 HEADEDIT 1.1 1996/04/02 09:10:31 ' ' ' ' HDREDIT2 1.6 2003/09/05 14:29:06 ? ? CLEAN 4.4 2003/09/05 14:29:11 139 139 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:07:27 139 139 $END $REMARKS -The following CALIB parameters were used: Calibration type = R Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.6 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 1.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 1.00 Slow Drop Rate NOT deleted -The following BINAVE parameters were used: Bin channel = p Averaging interval = 1.0 Minimum bin value = 1.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 9502cor.dat -The following CHANNEL(S) were removed from file. Conductivity_ratio temperature:thermistor1 temperature:thermistor2 Number_of_bin_records CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END !--1--- ---2---- --3-- ---4---- !Pressu Temperat Trans Salinity !re ure missi ! vity !------ -------- ----- -------- *END OF HEADER 1.1 8.3509 62.7 29.4169 2.1 8.3512 61.7 29.4197 3.1 8.3534 61.6 29.4382 4.0 8.3613 63.2 29.4612 5.0 8.3676 63.1 29.4882 6.0 8.3727 63.2 29.5111 7.0 8.3685 63.3 29.5071 8.2 8.3700 63.4 29.5041 9.0 8.3764 63.3 29.5216 9.9 8.3673 63.3 29.4954 10.9 8.3691 63.3 29.4929 11.9 8.3694 63.3 29.4974 13.0 8.3734 63.7 29.5274 14.0 8.3865 64.4 29.6422 15.1 8.4084 65.4 29.6922 16.0 8.4107 65.3 29.7062 17.0 8.4218 65.2 29.7157 18.0 8.4435 65.0 29.7411 19.1 8.4512 65.1 29.7594 20.0 8.4532 65.1 29.7610 21.0 8.4816 65.0 29.7665 21.8 8.5305 64.4 29.7805 22.8 8.5701 63.4 29.7967 24.2 8.5822 63.2 29.8079 25.0 8.5875 63.1 29.8167 26.0 8.5811 63.6 29.8212 26.9 8.5811 64.2 29.8291 27.9 8.5853 64.6 29.8402 29.0 8.5872 64.7 29.8420 30.0 8.5904 64.7 29.8474 31.0 8.6036 64.7 29.8542 32.1 8.6194 64.7 29.8635 33.0 8.6333 64.6 29.8714 34.0 8.6727 64.4 29.8917 35.0 8.6798 64.4 29.9050 36.0 8.6925 64.3 29.9122 37.1 8.7033 64.3 29.9217 38.0 8.6947 64.5 29.9298 39.1 8.6984 64.6 29.9396 40.0 8.7514 64.6 29.9691 41.0 8.7702 64.6 29.9833 42.0 8.7640 64.6 29.9780 43.0 8.7905 64.5 29.9927 44.2 8.7957 64.5 29.9993 45.0 8.8019 64.5 30.0044 46.0 8.8080 64.5 30.0097 47.0 8.8138 64.5 30.0164 48.0 8.8136 64.5 30.0178 49.0 8.8209 64.5 30.0278 50.0 8.8267 64.5 30.0353 51.1 8.8414 64.5 30.0539 52.1 8.8526 64.5 30.0645 53.1 8.8561 64.5 30.0676 54.0 8.8614 64.5 30.0716 55.0 8.8696 64.5 30.0778 56.0 8.8836 64.5 30.0911 57.0 8.8871 64.5 30.0960 58.0 8.8864 64.5 30.0954 59.0 8.8846 64.5 30.0954 59.8 8.8883 64.5 30.1019 61.0 8.9022 64.6 30.1205 62.0 8.9143 64.7 30.1312 63.0 8.9237 64.6 30.1356 64.0 8.9331 64.7 30.1385 65.0 8.9262 64.7 30.1399 66.0 8.9259 64.6 30.1409 67.0 8.9445 64.7 30.1437 68.0 8.9679 64.7 30.1501 69.0 8.9823 64.7 30.1586 70.0 8.9805 64.7 30.1622 71.0 8.9875 64.7 30.1661 72.0 9.0044 64.7 30.1692 72.9 9.0091 64.7 30.1747 74.0 9.0198 64.7 30.1768 75.0 9.0578 64.6 30.1908 76.0 9.1051 64.4 30.2105 77.0 9.1032 64.4 30.2251 78.0 9.1137 64.5 30.2430 79.0 9.1317 64.5 30.2613 80.0 9.1466 64.4 30.2982 81.0 9.1329 64.2 30.3241 82.0 9.1506 64.2 30.3351 83.0 9.1775 64.3 30.3468 83.9 9.1859 64.2 30.3620 85.0 9.2444 64.3 30.3829 86.0 9.2694 64.3 30.4182 87.0 9.2619 64.0 30.4534 88.0 9.2463 63.6 30.4827 89.1 9.2541 62.8 30.5131 90.0 9.2586 62.1 30.5388 91.0 9.2556 61.5 30.5608 92.0 9.2591 61.5 30.5745 93.0 9.2498 61.9 30.5884 94.0 9.2422 62.0 30.5921 95.0 9.1983 61.6 30.6085 96.0 9.2054 61.5 30.6071 97.0 9.2368 61.4 30.6253 98.0 9.2713 61.3 30.6514 99.0 9.2943 61.0 30.6670 100.0 9.3228 60.7 30.6967 100.9 9.3356 60.4 30.7156 102.0 9.3670 59.3 30.7587 103.0 9.3853 58.8 30.7965 104.0 9.3873 58.4 30.8080 105.0 9.3886 58.2 30.8117 106.1 9.3910 58.0 30.8174 107.0 9.3931 57.7 30.8250 108.0 9.3985 56.2 30.8529 109.0 9.4114 54.1 30.9005 109.9 9.4238 51.5 30.9546 110.9 9.4289 49.8 30.9964 112.0 9.4303 48.2 31.0288 113.0 9.4315 49.9 31.0493 114.0 9.4329 51.0 31.0670 115.0 9.4332 51.8 31.0763 116.1 9.4337 51.9 31.0832 117.0 9.4341 51.8 31.0910 118.0 9.4339 52.1 31.0950 118.9 9.4342 52.3 31.1024 120.2 9.4342 52.4 31.1054 120.9 9.4345 52.4 31.1073 122.0 9.4345 52.5 31.1091 123.0 9.4342 52.7 31.1176 124.0 9.4343 52.2 31.1338 125.0 9.4345 50.5 31.1436 126.0 9.4344 50.2 31.1447 126.8 9.4347 49.5 31.1446 127.9 9.4346 47.6 31.1516 129.0 9.4347 47.7 31.1571 130.0 9.4347 47.2 31.1601 131.0 9.4346 48.6 31.1695 131.9 9.4343 47.7 31.1772 133.0 9.4341 45.2 31.1836 134.0 9.4341 44.7 31.1861 135.0 9.4341 44.9 31.1894 136.0 9.4341 44.9 31.1909 136.9 9.4342 45.0 31.1924 138.1 9.4338 45.5 31.1981 138.6 9.4331 46.8 31.2083