*2013/12/16 14:22:43.86 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : GMT 1984/04/15 13:00:00.000 NUMBER OF RECORDS : 110 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ------------- ---------------- -------------- -------------- 1 Pressure decibar 0 109 2 Temperature 'deg C (IPTS68)' 7.298 7.427 3 Salinity PSS-78 31.3 31.576 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 8 F ' ' 3 3 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from 12 line header format. $END *ADMINISTRATION MISSION : 1984-11 AGENCY : IOS, Offshore Oceanography, Sidney, B.C. COUNTRY : Canada PROJECT : NCODE SCIENTIST : Huggett S. PLATFORM : Parizeau *LOCATION GEOGRAPHIC AREA : HECATE, DIXON, WCQC STATION : Q137 EVENT NUMBER : 52 LATITUDE : 54 40.50000 N ! (deg min) LONGITUDE : 132 51.50000 W ! (deg min) *INSTRUMENT TYPE : Guildline CTD $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- Pressure n/a ? Temperature n/a ? Conductivity n/a ? $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- C12L_IOS 1.0 1993/06/23 13:00:54 110 110 CALIB 7.1 1997/05/07 11:56:53 110 110 HDREDIT2 1.6 2003/06/30 16:51:00 ? ? CLEAN 4.3 2003/06/30 16:51:14 110 110 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 14:22:43 110 110 $END $REMARKS -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 8411CORR.CCF CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- --------------- ---- ------ ------------ Temperature 'DEG C (ITS68)' 11 ' ' (Temperature) (-0.1E-01 0.1E-02) Salinity PSS-78 11 ' ' (Temperature) (0.23E-01 -0.1E-02) Temperature 'DEG C (ITS68)' 11 ' ' (Pressure) (-0.1569386E-01 -0.1809178E-04) Salinity PSS-78 11 ' ' (Pressure) (0.4626023E-02 0.4526089E-05) $END *COMMENTS The metre average program replaced missing surface records with the first available records. For example: if the first record in the file started at 4.0 dbars then the program would create records at 0, 1, 2, and 3 dbars with identical temperature, salinity, conductivity and transmissivity values of those at 4 dbars. Collection method: Salinity-Temperature-pressure data were obtained with a Guildline CTD. Output from the probe consisted of analogue voltages of temperature, conductivity and pressure. The probe output was input into a 2100-series HP computer, digitized at a rate of 10 samples per second and stored on a 9-track magnetic tape. Reference: Thomson,R.E., W.R. Crawford and W.S. Hugget. 1988. Water Property Observations From The North Coast Oceanic Dynamics Experiment (NCODE): May 1983 to December 85 1980. Can. Data Rep. Hydrogr. Ocean Sci. 67: (Vol. 1 to 7). !--1--- ---2--- ---3--- !Pressu Tempera Salinit !re ture y !------ ------- ------- *END OF HEADER 0.0 7.406 31.306 1.0 7.406 31.306 2.0 7.406 31.306 3.0 7.406 31.306 4.0 7.409 31.303 5.0 7.412 31.302 6.0 7.416 31.302 7.0 7.416 31.300 8.0 7.417 31.303 9.0 7.414 31.305 10.0 7.415 31.303 11.0 7.425 31.306 12.0 7.425 31.310 13.0 7.427 31.306 14.0 7.427 31.315 15.0 7.422 31.320 16.0 7.417 31.321 17.0 7.413 31.327 18.0 7.407 31.327 19.0 7.405 31.333 20.0 7.403 31.336 21.0 7.401 31.340 22.0 7.400 31.339 23.0 7.400 31.342 24.0 7.399 31.346 25.0 7.398 31.342 26.0 7.395 31.348 27.0 7.395 31.348 28.0 7.395 31.349 29.0 7.395 31.348 30.0 7.395 31.349 31.0 7.393 31.353 32.0 7.395 31.349 33.0 7.395 31.349 34.0 7.394 31.352 35.0 7.393 31.353 36.0 7.392 31.353 37.0 7.390 31.356 38.0 7.391 31.356 39.0 7.391 31.358 40.0 7.389 31.362 41.0 7.389 31.361 42.0 7.389 31.357 43.0 7.387 31.364 44.0 7.390 31.366 45.0 7.390 31.362 46.0 7.389 31.367 47.0 7.390 31.368 48.0 7.389 31.366 49.0 7.389 31.368 50.0 7.387 31.365 51.0 7.389 31.364 52.0 7.390 31.369 53.0 7.388 31.375 54.0 7.391 31.374 55.0 7.391 31.376 56.0 7.390 31.377 57.0 7.390 31.382 58.0 7.390 31.385 59.0 7.388 31.391 60.0 7.390 31.385 61.0 7.392 31.384 62.0 7.389 31.391 63.0 7.393 31.391 64.0 7.393 31.388 65.0 7.401 31.395 66.0 7.411 31.398 67.0 7.412 31.406 68.0 7.414 31.403 69.0 7.417 31.403 70.0 7.414 31.413 71.0 7.415 31.418 72.0 7.415 31.413 73.0 7.398 31.425 74.0 7.393 31.424 75.0 7.390 31.430 76.0 7.389 31.440 77.0 7.390 31.441 78.0 7.396 31.445 79.0 7.391 31.460 80.0 7.396 31.459 81.0 7.398 31.450 82.0 7.400 31.461 83.0 7.401 31.466 84.0 7.401 31.466 85.0 7.400 31.468 86.0 7.393 31.479 87.0 7.390 31.483 88.0 7.393 31.481 89.0 7.388 31.481 90.0 7.386 31.486 91.0 7.372 31.491 92.0 7.375 31.492 93.0 7.371 31.501 94.0 7.363 31.515 95.0 7.353 31.522 96.0 7.339 31.533 97.0 7.342 31.531 98.0 7.333 31.537 99.0 7.328 31.536 100.0 7.326 31.535 101.0 7.326 31.539 102.0 7.326 31.534 103.0 7.324 31.537 104.0 7.327 31.536 105.0 7.315 31.548 106.0 7.308 31.552 107.0 7.308 31.560 108.0 7.306 31.571 109.0 7.298 31.576