*2013/12/16 14:22:40.45 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : GMT 1984/01/21 03:12:00.000 NUMBER OF RECORDS : 100 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ------------- ---------------- -------------- -------------- 1 Pressure decibar 0 99 2 Temperature 'deg C (IPTS68)' 6.785 7.365 3 Salinity PSS-78 31.841 32.683 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 8 F ' ' 3 3 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from 12 line header format. $END *ADMINISTRATION MISSION : 1984-10 AGENCY : IOS, Offshore Oceanography, Sidney, B.C. COUNTRY : Canada PROJECT : NCODE SCIENTIST : Huggett S. PLATFORM : Parizeau *LOCATION GEOGRAPHIC AREA : QCS, HECATE, DIXON, WCQC STATION : D4SE EVENT NUMBER : 92 LATITUDE : 54 14.80000 N ! (deg min) LONGITUDE : 131 38.10000 W ! (deg min) *INSTRUMENT TYPE : Guildline CTD $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- Pressure n/a ? Temperature n/a ? Conductivity n/a ? $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- C12L_IOS 1.0 1993/06/23 11:21:27 100 100 CALIB 7.1 1997/05/07 09:43:04 100 100 HDREDIT2 1.6 2003/06/30 16:47:56 ? ? CLEAN 4.3 2003/06/30 16:48:08 100 100 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 14:22:40 100 100 $END $REMARKS -The following CALIB parameters were used: Calibration type = C Pressure offset = 0.0 Calibration file = 8410CORR.CCF CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- --------------- ---- ------ ------------ Temperature 'DEG C (ITS68)' 11 ' ' (Temperature) (-0.25E-01 0.2E-03) Salinity PSS-78 11 ' ' (Temperature) (-0.2E-01 0.8E-03) Salinity PSS-78 11 ' ' (Pressure) (0.4658631E-01 -0.875611E-05) $END *COMMENTS The metre average program replaced missing surface records with the first available records. For example: if the first record in the file started at 4.0 dbars then the program would create records at 0, 1, 2, and 3 dbars with identical temperature, salinity, conductivity and transmissivity values of those at 4 dbars. Collection method: Salinity-Temperature-pressure data were obtained with a Guildline CTD. Output from the probe consisted of analogue voltages of temperature, conductivity and pressure. The probe output was input into a 2100-series HP computer, digitized at a rate of 10 samples per second and stored on a 9-track magnetic tape. Reference: Thomson,R.E., W.R. Crawford and W.S. Hugget. 1988. Water Property Observations From The North Coast Oceanic Dynamics Experiment (NCODE): May 1983 to December 85 1980. Can. Data Rep. Hydrogr. Ocean Sci. 67: (Vol. 1 to 7). !--1--- ---2--- ---3--- !Pressu Tempera Salinit !re ture y !------ ------- ------- *END OF HEADER 0.0 6.796 31.857 1.0 6.796 31.857 2.0 6.796 31.857 3.0 6.796 31.857 4.0 6.796 31.857 5.0 6.789 31.856 6.0 6.787 31.853 7.0 6.786 31.851 8.0 6.785 31.848 9.0 6.786 31.846 10.0 6.791 31.841 11.0 6.796 31.845 12.0 6.790 31.843 13.0 6.795 31.841 14.0 6.797 31.841 15.0 6.808 31.853 16.0 6.809 31.867 17.0 6.807 31.870 18.0 6.812 31.877 19.0 6.821 31.881 20.0 6.825 31.882 21.0 6.837 31.888 22.0 6.840 31.885 23.0 6.848 31.889 24.0 6.856 31.894 25.0 6.867 31.898 26.0 6.889 31.914 27.0 6.903 31.924 28.0 6.958 31.967 29.0 7.018 32.028 30.0 7.038 32.059 31.0 7.041 32.066 32.0 7.061 32.083 33.0 7.076 32.102 34.0 7.087 32.140 35.0 7.085 32.154 36.0 7.082 32.155 37.0 7.083 32.154 38.0 7.081 32.155 39.0 7.080 32.156 40.0 7.082 32.161 41.0 7.089 32.177 42.0 7.098 32.186 43.0 7.125 32.204 44.0 7.146 32.222 45.0 7.158 32.227 46.0 7.168 32.232 47.0 7.196 32.257 48.0 7.212 32.271 49.0 7.222 32.276 50.0 7.246 32.291 51.0 7.260 32.304 52.0 7.290 32.319 53.0 7.310 32.342 54.0 7.326 32.357 55.0 7.328 32.358 56.0 7.335 32.361 57.0 7.338 32.362 58.0 7.341 32.365 59.0 7.339 32.364 60.0 7.338 32.363 61.0 7.328 32.376 62.0 7.324 32.380 63.0 7.325 32.385 64.0 7.328 32.385 65.0 7.328 32.385 66.0 7.328 32.385 67.0 7.328 32.385 68.0 7.331 32.383 69.0 7.330 32.386 70.0 7.330 32.388 71.0 7.331 32.388 72.0 7.332 32.388 73.0 7.333 32.390 74.0 7.333 32.389 75.0 7.334 32.387 76.0 7.333 32.389 77.0 7.336 32.391 78.0 7.355 32.414 79.0 7.364 32.447 80.0 7.365 32.471 81.0 7.365 32.474 82.0 7.363 32.476 83.0 7.360 32.480 84.0 7.361 32.480 85.0 7.360 32.482 86.0 7.351 32.507 87.0 7.344 32.530 88.0 7.336 32.572 89.0 7.332 32.589 90.0 7.333 32.584 91.0 7.329 32.599 92.0 7.324 32.619 93.0 7.318 32.633 94.0 7.303 32.662 95.0 7.298 32.682 96.0 7.297 32.683 97.0 7.302 32.672 98.0 7.301 32.673 99.0 7.297 32.683