*2013/12/16 14:21:32.34 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : GMT 1983/05/07 13:12:00.000 NUMBER OF RECORDS : 58 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ------------- ---------------- -------------- -------------- 1 Pressure decibar 0 57 2 Temperature 'deg C (IPTS68)' 7.896 9.183 3 Salinity PSS-78 32.211 32.488 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 8 F ' ' 3 3 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from 12 line header format. $END *ADMINISTRATION MISSION : 1983-10 AGENCY : IOS, Offshore Oceanography, Sidney, B.C. COUNTRY : Canada PROJECT : NCODE SCIENTIST : Huggett S. PLATFORM : Parizeau *LOCATION GEOGRAPHIC AREA : WCVI, QCS, HECATE, WCQC, DIXON STATION : Q26 EVENT NUMBER : 33 LATITUDE : 53 51.30000 N ! (deg min) LONGITUDE : 133 15.30000 W ! (deg min) *INSTRUMENT TYPE : Guildline CTD $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- Pressure n/a ? Temperature n/a ? Conductivity n/a ? $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- C12L_IOS 1.0 1993/06/22 14:14:31 58 58 HDREDIT2 1.6 2003/06/30 16:35:26 ? ? CLEAN 4.3 2003/06/30 16:35:49 58 58 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 14:21:32 58 58 $END $REMARKS CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. $END *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- --------------- ---- ------ ------------ Temperature 'DEG C (ITS68)' 11 ' ' (Temperature) (-0.742E-02 -0.5208E-02) Salinity PSS-78 11 ' ' (Temperature) (0.38561E-01 -0.1157E-02) $END *COMMENTS The metre average program replaced missing surface records with the first available records. For example: if the first record in the file started at 4.0 dbars then the program would create records at 0, 1, 2, and 3 dbars with identical temperature, salinity, conductivity and transmissivity values of those at 4 dbars. Collection method: Salinity-Temperature-pressure data were obtained with a Guildline CTD. Output from the probe consisted of analogue voltages of temperature, conductivity and pressure. The probe output was input into a 2100-series HP computer, digitized at a rate of 10 samples per second and stored on a 9-track magnetic tape. Reference: Thomson,R.E., W.R. Crawford and W.S. Hugget. 1988. Water Property Observations From The North Coast Oceanic Dynamics Experiment (NCODE): May 1983 to December 85 1980. Can. Data Rep. Hydrogr. Ocean Sci. 67: (Vol. 1 to 7). !--1--- ---2--- ---3--- !Pressu Tempera Salinit !re ture y !------ ------- ------- *END OF HEADER 0.0 9.171 32.217 1.0 9.171 32.217 2.0 9.170 32.212 3.0 9.170 32.214 4.0 9.172 32.213 5.0 9.171 32.212 6.0 9.169 32.212 7.0 9.168 32.213 8.0 9.166 32.212 9.0 9.167 32.212 10.0 9.168 32.214 11.0 9.167 32.212 12.0 9.169 32.211 13.0 9.175 32.212 14.0 9.182 32.215 15.0 9.183 32.217 16.0 9.182 32.217 17.0 9.182 32.217 18.0 9.182 32.216 19.0 9.183 32.217 20.0 9.181 32.217 21.0 9.181 32.217 22.0 9.182 32.217 23.0 9.183 32.217 24.0 9.181 32.217 25.0 9.179 32.217 26.0 9.178 32.216 27.0 9.174 32.216 28.0 9.172 32.218 29.0 9.173 32.218 30.0 9.174 32.217 31.0 9.173 32.219 32.0 9.165 32.219 33.0 9.149 32.218 34.0 9.080 32.228 35.0 8.993 32.247 36.0 8.911 32.239 37.0 8.836 32.260 38.0 8.696 32.297 39.0 8.644 32.310 40.0 8.626 32.316 41.0 8.620 32.316 42.0 8.599 32.323 43.0 8.527 32.339 44.0 8.421 32.350 45.0 8.410 32.363 46.0 8.300 32.376 47.0 8.241 32.390 48.0 8.196 32.405 49.0 8.095 32.430 50.0 8.043 32.482 51.0 7.995 32.467 52.0 7.961 32.460 53.0 7.934 32.466 54.0 7.915 32.480 55.0 7.906 32.488 56.0 7.897 32.486 57.0 7.896 32.481